Products of Keg King
Spundy
€22.95*
The Spundy from Keg King is a neat little gadget that works as well as any spunding valve on the market. With a low profile - just 4.5 cm tall - the Spundy doesn't take up much room in fermentation chambers or kegerators.
Spundy provides brewers with the ability to set the pressure control simply by turning the black valve tip clockwise to increase pressure or counter clockwise to release.
The built in pressure gauge lets brewers see exactly what pressure is being held from 0 to 30 PSI (2 Bar).
Spundy's pressure gauge unscrews for easy cleaning and can even be used with a pre-set PRV (pressure relief valve).
Replacing the valve tip with a PRV gives brewers the advantage of preselecting the pressure they want to hold before there is pressure present.
Available
Fermenter King Junior 20l
€58.95*
Ferment and serve from the same tank with the Fermenter King Junior from Keg King. Made from clear, high-quality PET, you can ferment your beer under pressure, and then serve it directly out of the fermenter by hooking it up to your kegerator/tap system.
At 20 L, the Fermenter King Junior will hold the same as a cornelius keg and you easily fit two in your kegerator.
A spunding valve will be required to control the internal pressure of the fermenter. (5016419 or 5016418)
Available
Keg King Chubby 30 L Pressure Fermenter
€72.95*
The 'Chubby' is a 30 L pressure fermenter from Keg King - the next step up from the Fermenter King Junior. At 30 L in volume, this pressure fermenter is designed for full batches, and fits perfectly in a fermentation chamber. Made from clear, high-quality PET, you can enjoy all the advantages of pressure fermentation for batches 23-25 L, with plenty of headspace.
The Chubby lid features a gas and liquid post, as well as a PRV port, meaning gas and liquid are easily controlled for transfers, fermentation pressure and serving.
Brewers can extract bright, clear beer after fermentation by way of the floating diptubes that come standard with each Chubby fermenter. It also comes with stainless steel handles for easy transportation and the super smooth interiors make it easy to remove fermentation debris, making clean up simple.
Dimensions:
Height: 595mm
Width: 300mm
Available
Keg King Ball lock Keg 10l
€44.95*
the 10 L Ball Lock Keg from Keg King, a convenient PET keg equipped with ball lock posts, perfect for smaller or split batches. With its user-friendly design, assembling and using this 10 L keg is a breeze, and the built-in handles make transportation a cinch.
This keg comes complete with liquid and gas posts, along with a 35psi PRV integrated into the lid, ensuring a hassle-free "set and forget" mode.
What's in the box:
1 x 10L King Keg
2 x Stainless Steel Ball Lock Posts
1 x Lid Assembly (including lid, O-ring, and neck ring)
1 x Red PRV (rated 35psi/ 2.4 bar)
1 x Floating Dip Tube (featuring 60cm silicone hose and 1x float)*
*Note: The silicone hose of the floating dip tube can be cut to length according to your specific requirements. We recommend a length of 300mm for optimal performance.
Available
Apollo 30l Unitank Pressure Fermenter
€169.95*
The Apollo 30 L Unitank Pressure Fermenter takes brewing to new heights. This is the perfect fermenter to get into pressure fermentation, allowing you to ferment and carbonate in one vessel, meaning you get to drink your beer sooner.
With its conical shape, and clear, high-strength PET build, the Apollo allows you to ferment quality beer, under pressure, with confidence.
Specifications:
Stainless steel plunge valve and collection bottle for dumping trub and harvesting yeast
A dry hop port for sanitary dry hopping
Multi pressure option PRV selection - select the pressure setting from the 3 x PRVs included
Centralised floating dip tube for clear transfers
Thermowell to monitor the internal temperature
Built in handles
True conical shape
Stainless steel stand
When finished, the beer can be served directly from the fermenter, or transferred to a keg without introducing oxygen. Each unit is pressure tested straight off the production line.
Not Available
Apollo 30l Snub Nose
€139.95*
The Apollo 30 L Snub Nose Pressure Fermenter takes brewing to new heights. This is the perfect fermenter to get into pressure fermentation, allowing you to ferment and carbonate in one vessel, meaning you get to drink your beer sooner.
With its conical shape, and clear, high-strength PET build, the Apollo allows you to ferment quality beer, under pressure, with confidence.
Specifications:
A dry hop port for sanitary dry hopping
Multi pressure option PRV selection - select the pressure setting from the 3 x PRVs included
Centralised floating dip tube for clear transfers
Thermowell to monitor the internal temperature
Built in handles
True conical shape
Stainless steel stand
When finished, the beer can be served directly from the fermenter, or transferred to a keg without introducing oxygen. Each unit is pressure tested straight off the production line.
few Available
Ultratap Twist Auto Close Spring
€7.95*
The Ultratap Twist Auto Close Spring can be inserted into the Ultratap to return the handle to the closed position automatically after pouring, creating even more convenience for this innovative flow control product.
The spring is designed to fit the unique flow control feature at the back of the tap and will sit between your tap and your shank.
Note - the Auto Close Spring was designed for the Ultratap (non-twist) and will not work on the Ultratap Twist.
few Available
Long Shank for Ultratap
€25.95*
These long shanks are suitable to attach taps to an esky or fridge/freezer wall.
Will go through doors up to 64 mm thick. Requires a 22 mm hole.
Available
Spunding Valve
€39.95*
Use this Spunding Valve from Keg King to set the desired pressure in your pressure fermenter. Simply attached to the fermenter gas disconnect and set the pressure using the adjustable valve. When the pressure reaches the set PSI/Bar, the valve will relieve the pressure out of the fermenter.
The gauge displays up to 15 PSI. Constructed of brass with steel spring to control the internal poppet.
Available
Ultratap Twist
€62.95*
Ultratap Twist from Keg King takes their innovative Ultratap design with laminar flow, and provides a flow control feature that can be operated with one hand directly on the tap handle.
When pouring small glasses for paddles, samples or small serves, or simply to control the flow on lively beers, the Ultratap Twist enables precise flow control without making a mess.
Many taps on the market have a flow control mechanism, however, with the Ultratap Twist, this is built into the handle, meaning you can pour and control the flow with one hand, whilst holding your glass with the other.
Simply turn the handle clockwise or counter clockwise to increase or decrease the flow rate.
few Available
Stout Spout for Ultratap
€11.95*
For a smooth pour and creamy head when pouring stouts or other nitro beers.
The Stout Spout from Keg King can replace the standard spout that is included with the Ultratap from Keg King when pouring nitro beers, meaning you don't need to switch out the entire tap each time you change the beer.
With stainless steel construction, the longer nozzle length and resistance plate included, the Stout Spout creates a creamy finish when pouring stouts or other nitro beers.
Not Available
Apollo 60 l Unitank Pressure Fermenter kit
€209.95*
The Apollo 60 L Unitank Pressure Fermenter is big enough to match your homebrewing ambitions! Pressure ferment and carbonate a double batch of quality craft beer in one 60 L tank.
With its conical shape, clear, high-strength PET build, and high level of fermentation control, the Apollo allows you to ferment under pressure, with confidence.
Product Specifications:
Stainless steel plunge valve and collection bottle for dumping trub and harvesting yeast
A dry hop port for sanitary dry hopping
Centralised floating dip tube for clear transfers
Thermowell to monitor the internal temperature
Built in handles
CIP Capability
True conical shape
Stainless steel stand with castors
When finished, the beer can be served directly from the fermenter, or transferred to a keg without introducing oxygen. Each unit is pressure tested straight off the production line.The Spundy from Keg King is a neat little gadget that works as well as any spunding valve on the market. With a low profile - just 4.5 cm tall - the Spundy doesn't take up much room in fermentation chambers or kegerators.
few Available
Keg King Kegwasher
€94.95*
the Keg Washer from Keg King, the perfect solution for cleaning kegs, carboys, and fermenters affordably, efficiently, and with minimal hassle. Assembly is simple: just put it together and add warm cleaning solution to the bucket provided.
Once set up, the pump vigorously circulates the cleaning solution throughout your equipment, effectively dislodging sediment and residue without any fuss. With the Keg Washer, keeping your brewing gear spotless has never been easier.
Included the box:
Bucket
Pump
4 x Cleaning Tubes (varying lengths)
Gas and Liquid Disconnects
Tubing
Stainless Steel Tee
Stainless Steel Keg Stand
few Available
Ultratap Black
€47.95*
The Ultratap from Keg King with forward seal design provides users with a high performance tap that works in any sized draught system, from small short draw kegerators to large, long-draw commercial beverage dispense operations. The black powdered finish on this version adds a real visual impact to your home brewery system, and the durability of the finish exceeds abrasion testing.
Ultratap’s patented all stainless steel construction utilises 21st century, laser-precision manufacturing techniques that create a smoother, more sanitary product.
few Available
Ultratap Stainless Steel
€44.95*
The Ultratap from Keg King with forward seal design provides users with a high performance tap that works in any sized draught system, from small short draw kegerators to large, long-draw commercial beverage dispense operations.
Ultratap’s patented all stainless steel construction utilises 21st century, laser-precision manufacturing techniques that create a smoother, more sanitary product.
Available
Short Shank for Ultratap
€19.95*
These stainless steel Short Shanks are suitable to attach taps to a font.
Available
Jacket for Apollo 60l Unitank
€92.50*
This Jacket from Keg King fits the Apollo 60L Unitank. The Jacket will help control the temprature when fermenting. Especially helpfull when doing tempreture controlled fermentation.
Available
Apollo 30 L Pressure Fermenter Jacket
€74.95*
This Jacket from Keg King fits Apollo 30 L Snub Nose and Unitank pressure fermenters. Brewers can achieve fantastic heating and cooling efficiencies when used with temperature controlled systems. Even at ambient fermentation temperatures, the jacked provides a stable temperature if the ambient temperature swings up or down.
Made from insulated material and utilising a heavy duty zipper for access, these jackets are much more effective than thin neoprene jackets of old.
few Available