Tank volume of 46 liters (12 gallons) and malt capacity of 9kg (20 lbs). Pre-boil volume of 20-40 liters (5-11 gallons) for flexibility. Rapid heating and boiling with 3.2kW heating power. Enhanced accuracy with 2 digital sensors. Conical bottom with center draining for quick and effortless cleaning.Advanced control system with a 7" touch-screen, WiFi, and Bluetooth 4.2. The B40pro boasts a boil capacity of 40 liters (10 gallons) and approximately 9kg (20 lbs) malt capacity. It comes equipped with a robust pump controllable from the touch-screen. Wort circulates up through the center-pipe, and the pump attaches using Tri-Clamps, making removal easy even when the tank is full. The malt pipe features latches that unfold when lifted, allowing you to use both hands for lifting. Sparging is tube and pipe-free outside the tank. A sparge tube, positioned on the exterior of the centerpipe, follows the malt pipe when lifted, along with lifting the wort spreading device. This simplifies sparging from a separate tank without creating a mess. Post-B40pro brewing, there's no need to turn it upside down for cleaning. The centerpipe detaches effortlessly, enabling easy unit cleaning, with all trub draining directly into a bucket or drains. Utilize the included circulation device as a CIP solution to save time and cleaning chemicals. The system features two digital temperature sensors—one at the tank bottom and another before the pump. The maximum static offset is ±0.5°C. Sensors can be individually calibrated for maximum accuracy, boasting an accuracy of 0.1°C. You can also connect a third sensor (accessory) to monitor the wort temperature returning from the counterflow cooler, allowing you to pump directly to the fermenter when the temperature is optimal.With powerful heating elements providing over 3.2kW (230V) of power, water or wort heating is exceptionally fast. During the boil, the PID system deactivates, letting you adjust the power output for the perfect rolling boil. You can also adjust the maximum current of each mains input to 10, 13, 15, and 16 Amps, ensuring you never blow a fuse.All ports are 34mm Tri-Clamp fittings for maximum flexibility without leaks. The system is shipped with one 3-way valve as standard. All silicone tubes are 16x25mm food-grade silicone. The custom-developed control system features high-quality electronics and receives regular software updates with new features, facilitated via WiFi. Specifications: Dimensions excl. packaging: 58 (h) x 52 (w) x 52 (d) cm Dimensions with one side valve: 58 (h) x 62 (w) x 52 (d) cm Dimensions with two valves: 58 (h) x 72 (w) x 52 (d) cm Packaging dimensions: 70 (h) x 55 (w) x 55 (d) cm Weight excl. packaging: 20 kg Weight incl. packaging: 24.5 kg Tank dimensions: Ø40 cm, height 36 cm Tank volume: 46 liters (rec maximum boil volume – 40 liter)Malt pipe dimensions: Ø32 cm, height 32 cm Malt pipe volume: 25.7 l Max recommended grain quantity: 9 kg Minimum liquid volume: 15 l Build material: 1.0 mm stainless steel (SS304) Heating elements: 230V, 3200W (2x1600W) Pump: 24VDC brushless, max 25 l/min, max head 4.5 m, stainless steel head, stepless speed control from touch display Controller: ARM Cortex M4 180mhz, 7" Touch display Connectivity: WiFi 802.11 b/g/n, Bluetooth 4.2, MicroSD Hoses: 16x25mm silicone, food grade What's included: Complete brewing system with controller, pump, tank sensor, heaters and lid Malt pipe with handle and latches 1 pcs expanded metal filter 1 pcs 3-way valve Temperature sensor with adapter for pump line 5 pcs 34mm Tri Clamps with gaskets (all used for standard setup) 3 pcs 34mm TC blind caps 1 pcs dip tube, short type 1 pcs mash hat for spreading the wort 1 pcs sparge tube 150cm 16x25mm silicone tube 1 pcs 34mm TC to 19mm hose barb adapter O-rings for the center pipe and dip tube 1 pcs Power Cable, 2 meter

Key Features:The B80pro boasts an 80-liter (21-gallon) boiling capacity and approximately 20kg (44 lbs) malt capacity. It comes with a robust pump controllable through its 7" touch-screen interface. The wort circulates upward through the central pipe, easily detachable with Tri-Clamps even when the tank is full. For added convenience, the malt pipe features unfolding latches, allowing for two-handed lifting. Sparging is simplified without external tubes or pipes, as a sparge tube attached to the center pipe rises along with the malt pipe, lifting the wort-spreading device. This minimizes mess when sparging from a separate tank. Cleaning the B80 pro is easy and efficient. Simply remove the center pipe for easy cleaning, with trub draining directly into a bucket or drains. The included circulation device serves as a CIP (Clean in Place) solution, saving time and cleaning chemicals.The system incorporates two digital temperature sensors, with a maximum static offset of ±0.5°C. These sensors, located at the tank's bottom and before the pump, boast an accuracy of 0.1°C. Individual calibration is possible for maximum precision. An optional third sensor can be connected to monitor the returning wort temperature, allowing direct pumping to the fermenter at the ideal temperature. With a potent heating system totaling 6kW (230V), water or wort heating is remarkably swift. During the boil, the PID system deactivates, enabling adjustment of the power output for achieving the perfect rolling boil. You can also set the maximum current for each mains input, ranging from 10 to 16 Amps. All ports feature 34mm Tri-Clamp fittings, ensuring maximum flexibility without the risk of leaks. The system ships with a standard 3-way valve, and all included silicone tubes are 16x25mm, meeting food-grade standards. The custom-developed control system boasts high-quality electronics, with continuous software improvements and updates accessible via WiFi.Specifications:Dimensions excl. packaging: 67.5 (h) x 62 (w) x 62 (d) cm Dimensions with one side valve: 67.5 (h) x 72 (w) x 62 (d) cm Dimensions with two valves: 67.5 (h) x 82 (w) x 62 (d) cm Packaging dimensions: 83 (h) x 62 (w) x 62 (d) cm Weight excl. packaging: 27.5 kg Weight incl. packaging: 34 kg Tank dimensions: Ø50 cm, height 46 cm Tank volume: 90 liters (rec maximum boil volume – 80 liters) Malt pipe dimensions: Ø42 cm, height 42 cm Malt pipe volume: 58 l Max recommended grain quantity: 20 kg Minimum liquid volume: 25 l Build material: 1.0 mm stainless steel (SS304) Heating elements: 230V, 6000W (2x3000W) (two individual circuits) Pump: 24VDC brushless, max 25 l/min, max head 4.5 m, stainless steel head, stepless speed control from touch displayController: ARM Cortex M4 180mhz, 7" Touch display Connectivity: WiFi 802.11 b/g/n, Bluetooth 4.2, MicroSD Hoses: 16x25mm silicone, food gradeWhat's included:Complete brewing system with controller, pump, tank sensor, heaters and lidMalt pipe with handle and latches 1 pcs expanded metal filter 1 pcs 3-way valve Temperature sensor with adapter for pump line 5 pcs 34mm Tri Clamps with gaskets (all used for standard setup) 3 pcs 34mm TC blind caps 1 pcs dip tube, short type 1 pcs mash hat for spreading the wort 1 pcs sparge tube – 150cm 16x25mm silicone tube 1 pcs 34mm TC to 19mm hose barb adapter O-rings for the center pipe and dip tube Power Cables, 2 meter

Main featuresTank capacity of 150 litres (40 gallons) and malt capacity of 35 kg (77 lbs). 6 kW heating power (2x3 kW) using two main connections for fast heating and boiling. High accuracy with 2 digital sensors. Conical base with central drain for quick and easy cleaning. Robust control system with a 7-inch touchscreen, Wifi and Bluetooth 4.2. The B150pro is equipped with a powerful pump that can be conveniently controlled via the touchscreen. The wort circulates through the central pipe and the pump is attached with tri-clamps, allowing easy removal even when the tank is full. The malt pipe is fitted with latches that fold out when lifted, so you can use both hands to lift. The sparging takes place without hoses or pipes outside the tank. A sparging tube, which is installed outside the central tube, follows the malt tube during lifting and lifts the wort splitter at the same time. Cleaning with the B150 pro is efficient and uncomplicated. The central pipe can be easily removed, making it easier to clean the unit, and all the trub is drained directly into a bucket or the drains. Use the circulation pump as a CIP solution to save time and detergent. The system has two digital temperature sensors - one at the bottom of the tank and one in front of the pump. The maximum static offset is ±0.5°C. The sensors can be individually calibrated to ensure maximum accuracy and have an accuracy of 0.1°C. It is also possible to connect a third sensor (accessory) to monitor the temperature of the wort returning from the counterflow chiller, allowing you to pump directly into the fermentation tank when the temperature is correct. All connections are equipped with 34 mm Tri-Clamp fittings for maximum flexibility without leaks. The system is supplied with a 3-way valve as standard. All silicone hoses are made of 16x25 mm food grade silicone. The customised control system has high-quality electronics and the software is constantly being improved with new functions. It is updated via WiFi. Technical data: Dimensions without packaging: 79 (H) x 72 (W) x 72 (D) cm Dimensions with one side valve: 79 (H) x 82 (W) x 72 (D) cm Dimensions with two valves: 79 (H) x 92 (W) x 72 (D) cm Packaging dimensions: 97 (H) x 62 (W) x 72 (D) cm Weight without packaging: 37.5 kg Weight incl. packaging: 45 kg Tank dimensions: Ø60 cm, height 60 cm Tank volume: 169 litres (recommended maximum boiling volume - 150 litres) Malt pipe dimensions: Ø50 cm, height 55 cm Malt pipe volume: 108 litres Maximum recommended grain quantity: 35kg Minimum liquid volume: 35 litres Material: 1.0/1.2 mm stainless steel (SS304) Heating elements: 230V, 6000W (2x3000W) (two separate circuits) Pump: 24VDC brushless, max. 25 l/min, max. delivery head 4.5 m, stainless steel head, infinitely variable speed control via touch display Controller: ARM Cortex M4 180 MHz, 7" touch display Connectivity: WiFi 802.11 b/g/n, Bluetooth 4.2, MicroSD Tubing: 16x25mm silicone, food grade tubing Included in the box:Complete brewing system with control unit, pump, tank sensor, heaters and lid Malt pipe with handle and bars 1 extended metal filter 1 x 3-way valve temperature sensor with adapter for the pump line 5 x 34mm Tri-Clamps with gaskets (all used for the standard configuration) 3 x 34mm TC blind caps 1 immersion tube, short type 1 mash cap for wort distribution 1 lauter tube 150 cm 16x25mm Silicone hose 1 x 34mm TC to 19mm hose nozzle adapter O-rings for the central tube and the dip tube 2 mains cables, 2 metres

Tri Clamp for connecting TC34mm fittings. Gaskets not included.

High quality silicone tube.Dimensions:Inside diameter: 16mmOutside diameter: 25mmFood grade silicone. Sold by the meter.If you order more than 1, the tube will be cut to the total length.Max length, 50 meter

The Brewtools TC 1.5" Racking Gasket is a elegant and efficient solution for racking from the MiniUni+ models.

The lubrication is used for silicone, O-rings and other moving parts.You can also lubricate seals so that they slide easily.The product is intended for the lubrication of the following materials: - Silicone - PTFE/Teflon - Nitrile rubber - Viton (fluorocarbon) - EPDM It can be easily washed off at 200 degrees Celsius.

TC34mm elbow, 90°

Spunding valve for manual pressure setting.Adjustable from 0-2.2 bar (0-32 PSI) with a maximum deviation of 0.2 bar.

Tri Clamp fitting for use with garden connectors. Used to connect tap water to your cooler or for filling your brewing systems.

Kit with 3 legs and necessary accessories to raise the MiniUni base and make room for an elbow with a butterfly valve or a heating element etc.With the legs mounted, the height will increase with 14cm.

Contains what you need to carbonate in the Unitanks using Co2 and a ball lock connector.Contents:Ball Lock Adapter, Gas, TC34mm Carb. stone 120mm, 0.5 micronGaskets M16 o2/co2 stone holder for ball lock

Tri Clamp for connecting TC 2" fittings. Gaskets are sold separately.

The filter kit is installed directly on the butterfly valve out of the fermenter.Assemble the filter kit and leave in sanitizerInstall the filter kit on the fermentation tank valvePurge with Co2 a couple of times and relieve the pressure using the PRVOpen the valve, and let the air out using the PRVConnect your ball lock connector to your keg or bottling setupIncluded parts:Ball lock adapter, 2", Liquid with M16 threads3 pcs Filter, stainless steel 30mm, 300, 600 and 1000 micronFilter holder made from food grade Nylon (PA), M16TC 2" to 34mm TeeTC34mm Manual PRV3 pcs 2" Tri Clamps1 pcs 34mm Tri Clamp2 pcs TC gasket with filter groove (blue)1 pcs 2" Poly TC pipe, 200mm2" and 34mm gaskets

TC34mm to 10mm hose barb.

The lubrication is used for silicone, O-rings and other moving parts.You can also lubricate seals so that they slide easily.The product is intended for the lubrication of the following materials: - Silicone - PTFE/Teflon - Nitrile rubber - Viton (fluorocarbon) - EPDM It can be easily washed off at 200 degrees Celsius.

TC34mm to 19mm hose barb. Suitable for use with silicone hose 16x25mm.

Thermowell for temperature sensors. TC 1.5"

The pressure kit for the MiniUni™ Tank-series gives you full control of the fermentation and carbonation process.Included parts:Composite TC 4" Pressure topMini Spunding valve, M24 threaded Analog pressure gauge M14 PRV M16 to 7mm hose barb fitting Floating ball, 44mm with tube holder G1/4" to 3/8" Pushfit gauge adapter Tri Clamp, 34mm TC Gaskets Ball lock adapter, Gas, M24 threaded Ball lock adapter, Liquid, TC34mm Silicone tube 6x8mm

Ball-Lock adapter (Gas) to TC34mm. The adapter is made for CMB or other gas-fittings.

De professionele steam hats van Brewtools zijn gemaakt voor optimale veelzijdigheid. Ze zijn uitgerust met een siliconen randafdichting, 4 klemmen om ze op je brouwsysteem te bevestigen, een 110 mm inspectiegat waardoor je hop kunt toevoegen tijdens het koken, 2 handgrepen bedekt met siliconen en een 4 inch accessoirehouder bovenop. De siliconen plug voor het inspectiegat is inbegrepen. Vergeet niet een klem en pakking te bestellen voor de bovenste poort.

Ball-Lock adapter (Gas) to TC 1.5". The adapter is made for CMB or other gas-fittings.

The Brewtools insulation jacket helps you to keep the temperture stable during the mash as well a reducing the heat loss during boiling.Reccomended for outdoor use or in colder enviroments.

The Trubinator is designed for use in your brewing system or boil kettle. As you whirlpool, hops and other particles accumulate in the center of the filter, enabling the pump to transfer cleaner wort to your fermenter.A single wingnut and bolt secure the filter, making it easy to dismantle for cleaning.Diameter: 420mmHeight: 90mmStandard filter: R2x5