CDR BeerLab® systemCDR BeerLab® consists of a thermostatically controlled analyzer with photometric technology using LED emitters and kits of reagents that are pre-filled into vials and ready to use.Reduced analysis times
With CDR BeerLab® you are finally free to carry out the analyses independently, in your brewery, quickly and easily, without having to rely on an external laboratory.
It is possible to analyze 16 samples simultaneously and constantly monitor the production process, obtaining specific answers in a few minutes.Easy to use
The system has been designed so that it can be used not only in the laboratory, but also on the production line for real-time results, by personnel without specific technical training.The analysis methods, shown on the display, are simpler than traditional methods and can be performed in just a few steps.If required, the HELP function will guide the operator step by step through the procedure. The result is automatically calculated, displayed and printed out.Reliable
CDR BeerLab® guarantees high sensitivity, a wide measuring range and excellent repeatability of the results thanks to the innovative photometric technology using LED light sources and fixed wavelengths ranging from the ultraviolet to the visible spectrum (with a range of 0 to 6 optical density). The analysis results are correlated with those of the reference methods.Pre-filled and disposable reagents are packaged in bags of 10 tests, developed and produced by the CDR research laboratories.
In just 15 minutes, up to 16 samples can be analysed with CDR BeerLab® and up to 3 samples with the Junior model.
Beer/Wort:
TESTS
MEASURING RANGE
RESOLUTION
REPEATABILITY
TESTING TIME
Fermentable sugars on beer (glucose, fructose, maltose, maltotriose)
0.1-18.0 g/l
0.1 g/l
0.2 g/l
6 mins
15-200 g/l
1 g/l
2 g/l
6 mins
Fermentable sugars on wort (glucose, fructose, maltose, maltotriose, sucrose)
15.0-200.0 g/l
0.1 g/l
1.6 g/l
13 mins
Lactic Acid D+L
150-3500 ppm
1 ppm
73 ppm
10 mins
Bitterness
5.0-80.0 IBU
0.1 IBU
1.5 IBU
11 mins
Color
EBC 1-100
SRM 0.5-50.0
EBC 1
SRM 0.1
EBC 1
SRM 0.3
1 min
Alcohol by Volume
0.002-0.200% vol
0.001% vol
0.002% vol
11 mins
0.10-1.00% vol
0.01% vol
0.01% vol
11 mins
1.0-17.0% vol
0.1% vol
0.2% vol
11 mins
VDKs
0.05-2.00 mg/l
0.01 mg/l
0.06 mg/l
5 mins + distillation time
Yeast Vitality
0.5-2.6 AP
0.1 AP
0.1 AP
25 mins
pH
3.60-6.00
0.01
0.02
1 min
Calcium
20-150 ppm
1 ppm
5 ppm
8 min
Starch
0.10-5.00 g/l
0.01 g/l
0.07 g/l
1 min
Carbohydrates
2.0-80.0 g/l
0.1 g/l
0.6 g/l
13 mins
Acetic acid
20-220 mg/l
1 mg/l
11 mg/l
6 mins
FAN (beer and wort) Free Ammino Nitrogen by OPA
30-300 mg/l
1 mg/l
15 mg/l
4 mins
Total SO2
1.0-30.0 ppm
0.1 ppm
0.7 ppm
2 mins
Polyphenols
5-550 mg/l
1 mg/l
5 mg/l
10 mins
Water:
Calcium
20.0-250.0 ppm
0.1 ppm
4 ppm
1 min
Magnesium
2.0-50.0 ppm
0.1 ppm
1 ppm
1 min
Bicarbonate
1-300 ppm
1 ppm
3 ppm
10 mins
Chloride
15-500 ppm
1 ppm
21 ppm
1 min
Potassium
5-500 ppm
1 ppm
6 ppm
1 min
Sulfate
10-250 ppm
1 ppm
7 ppm
1 min
Zinc
0.05-1.00 ppm
0.01 ppm
0.03 ppm
2 mins
Alkalinity
5-600 mg/l
1 mg/l
12 mg/l
10 mins
Special solution for storing your pH meter.
Suitable for all ph meters
Buffered KCL solution
Prevents "degeneration" of the electrode when not in use
Store closed securely in the fridge.
Content 100 ml .
The pH starter kit is set of storage, cleaning and calibration solutions designed to extend the life of your pH electrode. Included in the kit is lab grade pH 4.01 buffer solution, pH 7.01 buffer solution, pH storage solution and pH cleaning solution. All bottles are 230 mL.
The buffer solutions certified to meet the standard to an accuracy of ±0.01 pH removing the inaccuracies involved with mixing buffers.
The storage and cleaning solutions are lab grade produced with premium chemicals
Milwaukee solutions are designed to help you achieve reliable and repeatable pH measurements while extending the life of your electrode.
The pH maintenance kit is set of storage and cleaning solutions designed to extend the life of your pH or ORP electrode. Keeping your sensor clean during calibration and measurement ensures accurate and repeatable readings. The pH sensor needs to be hydrated for the ion exchange process to occur. Putting storage solution in the probe cap before storage will keep your pH or ORP sensor hydrated and ready for the next use. If the probe sensor should become dry, storage solution can be used for reconditioning. Included in the kit is pH storage solution and pH cleaning solution. Both bottles are 230 mL.
The storage and cleaning solutions are lab grade produced with premium chemicals.
Special cleaning fluid for pH-electrode. Use: keep the electrode in the liquid, until the contamination is gone. After cleaning the electrode in additive-liquid keep moist to prevent degeneration of the electrode. Store securely closed in the fridge!
Main features:
Measures pH and temperature
One-touch automatic digital calibration
Water resistant
Simultaneous temperature display
Sleek, lightweight design
Large LCD display
Automatic Temperature Compensation (ATC)
Auto-off function, data-hold function and low-battery indicator
Includes a cap, batteries, storage solution and pH 7.0 buffer
Main specifications:
pH Range: 0 - 14
Temperature Range: 1-80 °C
Resolution:
pH: 0.1
Temperature (°C/F): 0.1
Accuracy:
pH: +/- 0.2
Temperature: +/-2%
Special solution for securing your ph meter.
Suitable for all ph meters
Buffered KCL solution
Prevents "degeneration" of the electrode when not in use
Store closed securely in the fridge.
Content 250 ml.
Digital pH meter. A lot of features and excellent accuracy for a fair price.
Features:
Measures pH and temperature
Auto-ranging three point calibration with digital fine tuning
Includes storage solution in a sponge embedded in a clear cap
Waterproof housing (IP-67 rating)
Simultaneous temperature display
Measurement Range: 0-14 pH
Digital automatic calibration (one point), with digital fine tuning
Automatic Temperature Compensation (ATC)
Auto-off function, data-hold function and low-battery indicator
Display: large and easy-to-read LCD screen includes simultaneous temperature reading
Replaceable Sensor (model SP-P2)
Factory Calibrated: The PH-200 meter is three-point checked and factory calibrated to pH 7.0. It can be re-calibrated to any point in its range with digital calibration using the push buttons.
Includes a cap, batteries, lanyard, and pH 7.0 buffer
Specifications:
pH Range: 0 - 14
Temperature Range: 0-80 °C (32-176 °F)
Resolution:
pH: 0.01
Temperature (°C/F): 0.1
Accuracy:
pH: +/- 0.02
Temperature: +/-2%
Calibration: Digital automatic calibration (one point) with digital fine tuning
Minimum EC/TDS: 5 uS/10 ppm
Electrode: Replaceable glass sensor and reference tube electrodes
Housing: IP-67 Waterproof (submersible; floats)
Power source: 3 x 1.5 V button cell batteries (LR44 or equivalent; included)
Dimensions: 18.5 x 3.4 x 3.4 cm
Weight: 96.4 g
Special cleaning fluid for pH-electrode. Use: keep the electrode in the liquid, until the contamination is gone. After cleaning the electrode in additive-liquid keep moist to prevent degeneration of the electrode.
Store securely closed in the fridge!
Special cleaning fluid for pH-electrode. Use: keep the electrode in the liquid, until the contamination is gone. After cleaning the electrode in additive-liquid keep moist to prevent degeneration of the electrode.
Store securely closed in the fridge!
Do you want to take extra good care of your Milwaukee pH55 or pH56 pocket tester? Then this carrying case might just be the product for you. The foam is already pre-cut to fit your tester.
The waterproof pH56 is the most accurate and reliable pH tester in the Milwaukee product range. With its dual level LCD readout it is ideal for measuring pH values as well as temperature levels in your brews. It is quickly calibrated, offering 6 calibration points in memory, and easy to use and to maintain. Why messing about with litmus paper and rely on guesswork when you can have the most accurate pH results?
Extreme pH accuracy: ±0.05 pH / pH range: -2.00 pH to 16.00 pH
ATC: Automatically corrects temperature effects on pH measurements
Waterproof construction: up to IP65
Light weight and portable: 3.5 oz / 99 gr
Easy to use: A large Dual Level LCD screen with easy-to-read graphic symbols
Freeze function: freezes values on the display so you can easily read them longer
Low energy use: Over 300 hours of battery life (batteries included)
Easy to maintain: Replaceable pH electrode Mi56P.
Care and useAll pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester with the Milwaukee Cleaning and Calibration Kit will give you fast, accurate results for a longer period.
The waterproof pH55 is one of the most accurate and reliable pH testers in the market. With its dual level LCD readout it is ideal for measuring pH values as well as temperature levels in your brews. It is quickly calibrated, offering 2 sets of memorized buffers, and easy to use and to maintain. Why messing about with litmus paper and rely on guesswork when you can have guaranteed accurate pH results?
pH range: -2.0 – 16.0 pH / pH accuracy: ±0.1 pHATC: Automatically corrects temperature effects on pH measurements
Waterproof construction: up to IP65
Light weight and portable: 3.5 oz / 99 gr
Easy to use: A large Dual Level LCD screen with easy-to-read graphic symbols
Freeze function: freezes values on the display so you can easily read them longer
Low energy use: Over 300 hours of battery life (batteries included)
Easy to maintain: Replaceable pH electrode Mi56P.
Care and useAll pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit at checkout time! This will be needed to help clean and condition the pH electrode before use!
The Milwaukee pH600 is a compact pH pen tester that measures the pH of your brews with digital accuracy. Can also be used in aquarium and aquaculture maintenance, to ensure correct pH values of water.
pH Range: 0.0 - 14.0 pH
Resolution: 0.1 pH
Accuracy: +/- 0.1 pH
Calibration: 1 Point
Fast, accurate results with digital LCD readout
Low power demand for extended battery life (batteries included)
The Milwaukee MW102 lightweight and portable pH and temperature meter is reliable, fast, simple to use and is built to take knocks. It is accurate to ± 0.02 pH, and comes with automatic temperature compensation. Ideal for use by brewers, wine makers, growers and other users all over the world with challenging pH measurement needs.
Fast easy to read results with large digital LCD readout
Extreme accuracy to ±0.02 pH and extended range (-2.00 pH to 16.00 pH)
Comes with both a pH probe and temperature probe allowing the meter to automatically adjust the pH reading for the effect of temperature
Two point calibration
3 feet probe cables for extra flexibility when testing
Auto shut off and low power demand with approx. 300 hours of continuous use (battery included)
The milwakee Mi56P replacement probe can be used to replace the probe of your pH55 and pH56 PRO
The probe can easily slide into your pH testers fitting and then screwes into the body for secure installation.
Be adviced this probe is only to replace the probe on your pH55 an ph56. It does not include the tester and cannot be used on other testers.
A pH meter is a delicate tool. Please make sure to consult the manual of your pH meter before replacing the probe.
The Cleaning and Calibration Kit contains everything you need to Calibrate and Clean your pH meter.
The set contains of:
one bag of M10000B Rinse Solution
one bag of 4.01 Calibration Solution
one bag of 7.01 Calibration Solution
one bag of M10016B Electrode Cleaning Solution
Please check the instructions of your pH meter For an optimal results.
€5.95*
Available
This website uses cookies to ensure the best experience possible. More information...