Products of Brewtools
Brewtools develops and manufactures brewing systems, fermenters, control systems and accesories for ambitious homebrewers an micorobreweries, pubs and restaurants all over the world.
Brewtools / Apparatus AS
Østerskogen 90
4879 Grimstad
NORWAY
post@brewtools.no
+47 37 40 56 15
Convinced by the quality of their products, Brewtools offers 5 years warranty on all it's products.
Silicone grease 28g
€8.95*
The lubrication is used for silicone, O-rings and other moving parts.You can also lubricate seals so that they slide easily.The product is intended for the lubrication of the following materials: - Silicone - PTFE/Teflon - Nitrile rubber - Viton (fluorocarbon) - EPDM It can be easily washed off at 200 degrees Celsius.
Silicone Tube 16x25m, Transparant per m
€15.45*
High quality silicone tube.Dimensions:Inside diameter: 16mmOutside diameter: 25mmFood grade silicone. Sold by the meter.If you order more than 1, the tube will be cut to the total length.Max length, 50 meter
Brewtools Barb elbow, 90°, 3/8" NPT to 10mm
€2.95*
Barb elbow, 90°, 3/8" NPT to 10mmPP, semi-transparent
TC Gasket, 34mm, DN20, 5 pack
€7.43*
5 TC-gaskets for use between TC 34mm fittingsDN20 is used where the inner dimensions of the fittings exceeds 16mm Made from food grade silicone
Ball Lock Adapter, Gas, TC34mm M16 inside thread
€24.45*
Ball Lock Adapter, Gas, TC34mm M16 inside thread
EVA+PE-tube, 12x18mm per m
€35.34*
EVA+PE-tube perfect for glycol and other uses where a strong tube is needed.Commonly used as main tubes for glycol where you use multiple tanks on the same line.The tube fits our 12mm barbsFood safe up to 60 degrees C (140 degrees F)
Quick connector, F to 10mm barb (3/8")
€10.59*
Quick connectors suited for glycol to cool fermenters.Fits in combination with 8.5x14mm EVA tubes both insulated and non-insulated.
Quick connector, F to 10mm barb (panel)
€15.50*
Quick connectors well suited for glycol to cool fermenters.Fits perfectly in combination with 8.5x14mm EVA tubes both insulated and non-insulated.Hole size: 18mm
Quick connector, Female to 3/8" NPT
€10.95*
Leak-free quick connectors well suited for glycol to cool fermenters.Fits with our 8.5x14mm EVA tubes both insulated and non-insulated.
Quick connector, Male to 3/8" NPT
€10.95*
Leak-free quick connectors are well suited for glycol to cool fermenters.Fits with 8.5x14mm EVA tubes both insulated and non-insulated.
Quick connector, M to 10mm barb (3/8")
€10.59*
Quick connectors well suited for glycol to cool fermenters.Fits 8.5x14mm EVA tubes both insulated and non-insulated.
Quick connector, M elbow to 10mm barb
€10.59*
Leak-free quick connectors well suited for glycol to cool fermenters.Fits perfectly 8.5x14mm EVA tubes both insulated and non-insulated.
TC Gasket, 34mm, DN15, 5-pack
€8.45*
5 TC Gaskets for 34mm Fittings.
Size: Designed for use between TC 34mm fittings.
DN15 Specification: Suitable for fittings with inner dimensions of 16mm or less.
Material: Made from high-quality, food-grade silicone.
These TC gaskets ensure a secure and sanitary seal between your fittings, perfect for food and beverage applications.
Ball Lock Adapter, Gas, M24 M16 inside thread
€25.95*
Ball-Lock adapter (Gas) to M24 threads.The adapter is made for CMB or other gas-fittings.M16x1.5mm inside threads for accessories.
Brewtool Inline oxygenation kit
€130.45*
The Brewtools inline oxygenation kit is designed to inject oxygen during transfer to your fermenter. It is recommend to place a sight glass after the TC tee, to keep an eye on the O2 flow.Requires an oxygen tank with a pressure regulator. Included: - TC34mm Tee - Barbed O2/Co2 stone holder, 6-10mm tube - O2/Co2 stone, 0.5micron. G1/8" threads - 3 TC34mm clamps - 1 5-pack of TC34mm gaskets - 1 gasket for the stone
Brewtools Ball Lock Adapter, Gas, TC 2"
€38.95*
Ball-Lock adapter (Gas) to TC 2".
The adapter is made for CMB or other gas-fittings.
