Malt Mills - buy now from Braumarkt

Malt Mills

Base plate for 2 and 3 Roll Inox Malt mills

Sturdy base plate that can be attached to the 2 and 3 roll malt mills. When you already own a 2 or 3 roll maltmill you can easily replace the stainless steel carriers by this base plate. Length and Width; 350 x 250 mm Thickness: approx 0.8 mm Material : ply wood

€12.95*

Available

New

Grainfather Electric Grainmill and mounting board

The Grainfather electric malt mill is motorised, compact and easy to use at home. It is equipped with large rollers that crack the outer shell of the grain lengthwise, creating an optimal surface for mashing and a better filter bed for rinsing. The removable grain hopper can hold up to 1 kg of grain at a time, and with 10 easily adjustable openings ranging from 0.8 mm to 2 mm, this mill is designed to handle different types of grain. Grind different base malts and special grains, and even change the speed at which your grain is ground with the variable speed knob. The malt mill is easy to mount on a workbench or bucket, but works best with the included Grain Mill Bamboo Mounting Board. Moreover, the mill is easy to assemble thanks to its built-in motor and compact design. Simply attach the grain hopper. Set the desired opening by pulling the spring-loaded pin and turning the dial. Put the grain in the hopper and press the switch to start grinding. Specifications: Voltage: 220-240V Power: 400W Rollers: 58mm diameter, made of hardened stainless steel. 10 grinding positions from 0.8mm-2mm Grinds 1.7kg of malt per minute Hopper capacity: 1kg

€349.95*

Available

Malt Mill Basic with Stainless Steel Rollers

The adjustable rollers and the hopper are made from stainless steel, while the main block and the body are made of 6061 Aluminium. The rollers are embedded in brass bearings. The malt mill is capable of handling high loads and require very little maintenance. Comes with two carriers. Specifications: Suitable to be driven by a drill, a concrete mixer or a motor. Adjustable rollers for consistent milling on both sides (Range: 0.2 – 3 mm). Rollers are provided with a 12 TPI rib for efficient milling of the malt. Manual included Dimensions: 76 x 150 x 50 mm Rollers: ø28 x 127 mm Length handle: 200 mm Capacity: 2.72 kg/min Attention: The metal work of the mill may have streaks and smudges. This is a result of the production process and does not have any effect on the correct operation of the mill.

€89.95*

Available

Malt Mill with 3 Stainless Steel Rollers

Ideal malt mill for the novice and advanced brewer. Mill up to 50 kg of malt per hour. Adjustable stainless steel rollers. Adjustable rollers between 0.6mm and 2.5mm SS/INOX rolls Large aluminum funnel for 8 KG malt2 Stainless steel carriersWooden base plate (350x250x12mm) Handcrank Capacity +/- 1 KG per minute in manual use Capacity +/- 1.5-2 KG per minute when using a drill (200 RPM) Sturdy and compact, easy to assemble 3 year warranty DIRECTLY connectable to a drill. Result: An excellent and flawless drive. We recommend a drill with adjustable speed to grind your malt at 150-200 rpm. The wooden mounting base fits well over a 25 liter brewing bucket.

€139.95*

Available

MattMill Student

Made in Germany, light in weight and made of impact resistant plastic. Contains hardened Ø60 mm thick rollers suitable for lifelong (amateur) use. Application: Attach the malt mill to a table (eg using a glue clamp) and insert the supplied shaft into the appliance to secure it in the head of a drill. Recommended speed: 100-400 / min. As a funnel, an inverted PET bottle is usually used, the bottom of which is removed. Place the inverted bottle with the neck into the opening of the Mattmill Student, resulting in a perfectly scaled malt (approx. 1 kg / min) Attention: Will be delivered without decoration sticker, attachment and funnel

€128.95*

Available

Mattmill Master Complete

MattMill Master Complete is a high-quality malt mill. Ideal for use in combination with the Speidel braumeister, Grainfather G30, G40 and G70 or the Easybrew SB30p and SB60p.Secure closed housing with stainless steel cladding. Smooth running rollers thanks to the rolling bearings.The innovative MattMill-Roll Adjustment ensures secure and reproducible milling results (also ideal for a circulation system) the grinder can be easily and quickly adjusted in 5 steps: 0.9 - 1.1 - 1.3-1.45 - 1.6 mm.Medium-thick, non-slip, sharp rollers in the usual hardened MattMill quality.Standard including very nice 7L stainless steel funnel with quick release.Can be driven with a crank (optional) or with a slowly rotating cordless screwdriver or drill.Equipped with bottom plate and store box.

€259.00*

not Available

Details

MattMill Malt Mill Classic Complete Roller Mill

Specifications: Hardened rollers Ø 35 mm x 171 mm Durable and maintenance-free Handmade in Germany Drive with drill or optional hand crank Infinitely adjustable from 0-2 mm Capacity: +/- 3 kg malt per minute (motorized) 2 years warranty

€329.95*

Available

Mattmill malt mill for Braumeister

Technical data: installed on a stainless steel plate Convenient roll adjustment. roll mill Ø70mmx40mm, cross-milled (optimal for results) and hardened sliding bearing, replaceable Speed: about 10gr / rev

€359.95*

few Available

MattMill Malt Mill Compact Comfort Roll Mill

Extra hardened rollers (Ø 70mm) Length: 50 mm Durable and maintenance free Hand made in Germany! Hand cranked (with optional handle) or driven by drill Stepless adjustment from 0 to 2 mm Capacity: up to 3 kg of malt per minute 2 years of warranty For more information: http://www.mattmill.de/mattmill-kompakt/ Note: Does not come with a funnel!

€219.50*

Available

MattMill Malt Mill Classic Basic Roller Mill

Hardened rollers Ø 35 mm x 171 mm Sustainable and maintenance-free Handmade in Germany Drive with drill or optional pendulum Infinitely adjustable from 0-2 mm Capacity: +/- 3 kg malt per minute (motorized) 2 years warranty Hopper not supplied Complete with instructions for building a funnel and motorization of the mill

€237.50*

Available

MattMill standard for malt mill Braumeister

The perfect standard for the MattMill Braumeister. The standard is universally applicable and can be disassembled. Due to the adjustable height, the standard is suitable for collector trays from 150 mm to approx. 500 mm. The grinder is assembled on stainless steel brackets. With its weight of about 4.7 kg, the standard offers a safe standard.

€144.95*

not Available

Details

Crank for MattMill Malt Mill

Crank for MattMill Malt Mill. Ideal for small amount and when there is no drilling machine around.

€17.95*

few Available

MattMill Malt Mill Compact Roller Mill

Compact and economical German roller mill. Extra hardened rollers (Ø 70mm) Length: 50 mm Durable and maintenance free Hand made in Germany! Hand cranked (with optional handle) or driven by drill Stepless adjustment from 0 to 2 mm Capacity: up to 3 kg of malt per minute 2 years of warranty For more information: http://www.mattmill.de/mattmill-kompakt/ Note: Does not come with a funnel!

€189.95*

few Available

MattMill malt mill for Braumeister 230V

Technical data: installed on a stainless steel plate Convenient roll adjustment. roll mill Ø70mmx40mm, cross-milled (optimal for results) and hardened plain bearing, replaceable power 180W 230-240V ac integrated fuse Speed: about 93 / min

€695.00*

not Available

Details

MattMill Braumeister hopper

Hopper for the Mattmill Braumeister maltmill. The funnel has a capacity of about 25 liters and can be quickly assembled and disassembled with quick fasteners.

€124.95*

few Available

Cast Iron malt mill with plastic hopper

Affordable grain crusher in tinned cast iron, with plastic hopper. Very suitable for crushing malt for beer brewing, but can also be used for crushing maize, grains, seeds, ... This is a basic grain maill that will grind malt compared to a roller mill which will crush the malt and leave the husks intact. However, if adjusted correctly you can achieve the same mashing efficiency with this mill as you could with a roller mill. Just make sure you don't grind too fine!Mill in tinned cast iron.Plastic hopper Large capacity: up to 25 kg/hAdjustable crush3 years warranty

€52.95*

few Available

Bulldog Malt Mill

This Bulldog malt mill will have you grinding your malts in no time. Unlike other malt mills, the Bulldog malt mill is driven by a set of gears. This is to guarantee well-roasted malt.The Bulldog malt mill comes with a wooden base plate. Specifications: Stainless steel Rollers Gear driven Stainless steel hopper Handy connection for use with drill Crank for manual grinding Capacity +/- 1 KG per minute when used manually Capacity +/- 1.5-2 KG per minute when using a drilling machine (200 RPM) Sturdy and compact, easy to assemble 2-year warranty

€119.95*

not Available

Details

Mattmill Hopper for Compact malt mills

Stainless steel hopper for the MattMill Compact and Compact Comfort malt mill.Volume 6,5 liter.Easy to install on MattMill Compact and Compact Comfort mills (as of production year 2017)

€49.95*

Available

Summer Maltman 75 malt mill

ATTENTION: A SEPARATE ORDER PROJECT APPLIES FOR THIS ITEM. PLEASE CONTACT OUR CUSTOMERSERVICE FOR CURRENT DELIVERY TIMES Email: info@braumarkt.com

€1,595.00*

not Available

Details

Arsegan Malt Mill Premium Cast Iron

This is a basic grain maill that will grind malt compared to a roller mill which will crush the malt and leave the husks intact. However, if adjusted correctly you can achieve the same mashing efficiency with this mill as you could with a roller mill. Just make sure you don't grind too fine! Hopper +/- 0.5 kg Large capacity: up to 25 kg/h Adjustable crush 3 years warranty

€54.95*

Available

Summer MaltMan 110 malt mill

€1,795.00*

not Available

Details

Mattmill Master

MattMill MasterSafe closed housing with stainless steel exterior.smooth-running rollers thanks to the rolling bearings.the innovative MattMill roller adjustment ensures reliable and reproducible results (also ideal for a circulation system) the gap can be easily and quickly adjusted in 5 steps: 0.9 - 1.1 - 1.3 - 1.45 - 1.6 mm.Medium-thick, non-slip, sharp rollers in the usual hardened MattMill quality.Including very nice 7L stainless steel funnel with quick release as standard.Can be driven with a crank (optional) or with a slowly rotating battery screwdriver or drill.Note:bottom plate not included.Optionally available:MattMill Store BoxMattMill crank

€265.00*

few Available

Mattmill Store Box

This box can be used for the MattMill Classic and the MattMill Master dimensions:310 x 500 x 200 mm (outside)275 x 390 x 165 mm (inside)Remark : Bottom plate for malt mill is not included.

€19.95*

few Available

9 %

Malt Mill Deluxe with 2 Stainless Steel Rollers

Ideal malt mill for the novice and advanced brewer. Mill up to 50 kg of malt per hour. Adjustable stainless steel rollers. Adjustable rollers between 0.2mm and 3mm SS/INOX rolls Large aluminum funnel for 7 KG malt Sturdy wooden base plate (350 x 250 mm) Handcrank Capacity +/- 1 KG per minute in manual use Capacity +/- 1.5-2 KG per minute when using a drill (200 RPM) Sturdy and compact, easy to assemble 3 year warranty DIRECTLY connectable to a drill. Result: An excellent and flawless drive. We recommend a drill with adjustable speed to grind your malt at 150-200 rpm. The wooden mounting base fits well over a 25 liter brewing bucket.

€99.95* €109.95*

not Available

Details