Wort Chillers
Easybrew Counterflow Chiller incl. Hosebarbs
€159.95*
Cool like a pro? With this counter flow chiller it's possible. Because this chiller works with a tube in tube system, you can cool your wort quickly and efficiently without using too much water. The cooler is made of stainless steel and equipped with tri-clamp connections on the wort side and thread on the water side. A Gardena hose barb can easily be screwed onto this. To prevent leakage, we recommend that you wrap a piece of Teflon tape around the screw thread.
Specifications:
Material: Stainless Steel (304)
Wort side connection: 2x Tri-clamp
Water side connection: Thread suitable for Gardena coupling.
Number of revolutions: 12
Cooler comes with 2x tri-clamps and 2x hose nozzles 1/2" (hose size 12x17)
We recommend using 12x17 silicone hose on the wort side. A garden hose with Gardena couplings is sufficient on the water side.
Available
Hose Barb Straight PE 12mm x 3/4" VR for Plate Chiller
€4.75*
Hose Barb Straight PE 12mm x 3/4" VR for Plate Chiller
Available
Premium Wort Chiller Stainless Steel 20 litres
€78.95*
Simply connect to the tap, dip into the wort kettle and wait. Perfect to use with a Speidel Braumeister or other brewing kettle.
Cools down 20-30 litres of wort in about 15-20 min.
Complete with integrated gardena couplings.
Top quality "made in EU"Height: 280 mm (spiral) - 470 mm (total)Diameter: 190 mm
Not Available
Premium Wort Chiller Stainless Steel 50 litres
€104.95*
Simply connect to the tap, dip into the wort kettle and wait. Perfect to use with a Speidel Braumeister or other brewing kettle.
Cools down 50 litres of wort in about 15-20 min.
Complete with integrated Gardena coupling
Top quality "made in EU"
Not Available
Premium wort Chiller Stainless Steel for 10 litres
€68.95*
Simply connect to the tap, dip into the wort kettle and wait. Perfect to use with a Speidel Braumeister or other brewing kettle.
Cools down 20 litres of wort in about 15-20 min.
Complete with integrated Gardena coupling
Top quality "made in EU"
Available
Wort chiller compact
€69.95*
This double layered chiller coil gives your wort more contact space with cold water. This wil reduce the amount of water needed to cool the wort.
Specifications:
Material: 304 Stainless steel.
Total lenght: 20m
Pipe thickness: 1mm
Pipe Outer Diameter: 8mm
Pipe Inner Diameter: 6mm
Height: 20cm
Coil Diameter: 15.5cm
20 liters of wort will cool down in 10-25 minutes from 99°C to 29°C. The speed will depend on the temperature and the flow speed of the water.
Available
Wort cooler stainless steel 20 plates incl stainless steel hose barb 1/2"
€79.95*
Cool your wort like a professional brewery does with this ultra compact plate heat exchanger. With this device (consisting of 20 stainless steel plates), 30-40 liters of hot wort can be cooled to 20°C in as little as 10 minutes by gravity (no additional pump required). Precipitation of the hot trub is not disturbed by the rapid cooling, thus minimizing the risk of wort infections. The cooler is easy to use and clean, water consumption is limited.
20 stainless steel / INOX platesStainless steel / INOX hose nozzles 1/2 "KCan cool back 50-60 liters of hot wort in +/-10 minutes. (depending on the tap water temperature)Info regarding hoses: Appropriate size for the supply and return hoses is hose with an inner diameter of 9 or 10 mm.For the supply (warm side) it is best to choose Silicone hoseFor the return (cold side) it is best to choose PVC hose
Available
Wortkoeler dompelmodel 50L Basic
€89.95*
Gewoon aan te sluiten op de kraan, in de wortketel dompelen en wachten. perfect te gebruiken met een brouwketel.Koelt tot 50-70 liter wort af in ongeveer 15-25 min.Wordt geleverd zonder gardena aansluiting of slangen.
Not Available
Wortkoeler RVS 30 platen incl rvs hose barb 1/2"
€99.95*
Wortkoeler RVS 30 platen incl rvs hose barb 1/2"
Available
Wortkoeler RVS 60 platen incl rvs hose barb 1/2"
€139.95*
Wortkoeler RVS 60 platen incl rvs hose barb 1/2"
few Available