Discover Superior Performance with Our High-Quality Magnetic Pump for Liquids up to 100°C
Experience precision and reliability with our top-of-the-line magnetic drive pump designed for pumping clear liquids at temperatures up to 100°C. Crafted with high-quality stainless steel fittings, the pump ensures durability and longevity in your brewing operations.
Key Features:
1/2" stainless steel fittings
Flow rate of 8 - 12 litres per minute
Power: 10 W - 240 V
Convenient on/off switch for easy control
Fully enclosed housing for added safety
Virtually silent operation
Provides a head of up to 1.5 metres
Not self-priming; avoid running the pump dry
3-year warranty for peace of mind
Applications:
Circulation during the mashing process when combined with a filter bottom.
Transfer of wort from the lauter tun to the brewing kettle.
Transfer of wort from the brewing kettle to the fermentation tank
Re-circulation of cleaning solution through a plate chiller, soda keg, etc.
Put the pump after the plate chiller if used for pumping chilled wort.
Power: 10 W - 240 V
Inlet/outlet: 1/2" male thread
Capacity: 9-15 L/min
Head: 1,5-2 m
Max. temperature: 90 °C
3 year warranty
Supplied without EU power plug!
Electropump for liquids NOVAX 20 BCapacity: 1700 l/hourSelf priming liquid ring pump with electromotorWithout bypassCan pump in both directions Suitable for alimentary liquids, such as water, wine, wort, milk and vinegarWith standard VITON sealPower 340 W/0,5 pk (2850 RPM)Hose barb: 20 mmMaximum head: 20 metresPower supply: 230 V/50 HzMaximum temperature: 95°CDon't let the pump run dry.
Cage Aspiration Filter: 25 mm
Inner diameter hose piece: 25 mm
Outside diameter of hose piece: 25 mm
Outside diameter filter housing: 36 mm
Total height: 95 mm
This is a classic self priming lateral liquid ring pump with starry impeller. This particular type of hidraulics provides the pump with an extraordinary self priming capacity, also in absence of a continuous flowing of the liquids in suction ( presence of air or other gases ). It is particulary made for the transfer of liquids such as WINE, MUST, SALTY AND SOFT WATER, MILK, OIL, GASOIL, whose viscosity is not over 30 degrees CENTISTOKES or over 4 degrees ENGLER. The fluids to be conveied are to be neutral and clean or contain in suspansion only a small percentage of solids ( 0.2-0.5% max). They are to have a hardnes and granulation which prevent the damage of the inside pump surface. Yet a narrow mesh filter can be mounted on the suction piping.
To be drived with a 2500 rpm drill.
Technical specifications:
Code: 290000
Model: DRILL 14
L / h: 1400
øD mm: 14
Hmax (m): 24
r.p.m.: 2850
LxWxH: 70X100H120
kg: 1.5
Cage Aspiration Filter: 16 mm
Inner diameter hose piece: 11 mm
Outside diameter of hose piece: 16 mm
Outside diameter filter housing: 39 mm
Total height: 95 mm
Easily transfers large amounts of liquid through the connection with the head of a drill. Suitable for wine or beer.Hose barb 14 mmMaximum speed: 2850 rpm => 1400 l/hourDon't let the pump run dry.
Pump with electric motor NOVAX 20 MFlowrate: 1700 l/hLiquid ring pump, self-priming with electromotorWithout bypassPump operable in 2 directions. Suitable for pumping clear or lightly charged food liquids, such as water, wine, wort, etc.With NBR axial sealPower supply: 230 V, 50 Hz.Max head: 25 mConnection: 20 mmPower: 340 W | 0,5 hp, 2850 rpmMaximum temperature: 35°CDon't let the pump run dry.
Cage Aspiration Filter 20 mmProtects your pump from undesired chunks in your wort, must, juice,… Made of food grade plastic. Easy to mount thanks to the tube connection.Inner diameter hose piece: 18 mmOutside diameter of hose piece: 20 mmOutside diameter filter housing: 40 mmTotal height: 95 mm
With this carbonisation kit, you can easily pressurise your beer in your soda keg in a brief period of time.
How it works:
You connect the black connector to the filled soda keg.
Attach the Co2 hose to the pressure gauge of your carbonation cylinder.
Turn on the pump to run the beer through the hose. When the hose is filled, attach the grey coupling to the hose and connect it to the keg.
Set the pressure on the manometer to the correct pressure (see graph) and open the carbon dioxide tap
Let the pump continue pumping until the liquid in the discharge hose to the keg no longer contains air bubbles. On average, it takes 30-45 minutes to saturate the beer at 3°c
Now let the keg with beer rest for a while and test the pressure in the keg with the pressure gauge of your Co2 cylinder after a few hours. If the pressure has dropped below the pressure you have in mind, repeat the above procedure again.
A few tips for saturating beer:
Make sure the beer is as cold as possible. Preferably around 3°c
Check the chart to see the ideal pressure for your type of beer.
Disinfect the pump well both before and after use. You can disinfect the bubbler by boiling it in water for 10 minutes. Do not use Puro Oxi when cleaning the carbonisation stone.
Package content:
Plastic pump (self-priming) incl power supply.
Ball-lock couplings for gas and liquid
Stainless steel T-piece with Hosebarbs
Carbonisation stone
PVC hose
Teflon tape
Hose clamps
Cage Aspiration Filter: 40 mm
Inner diameter hose piece: 33 mm
Outside diameter of hose piece: 40 mm
Outside diameter filter housing: 150 mm
Total height: 150 mm
Cage Aspiration Filter: 30 mm
Inner diameter hose piece: 23 mm
Outside diameter of hose piece: 30 mm
Outside diameter filter housing: 122 mm
Total height: 118 mm
Cage Aspiration Filter: 50 mm
Inner diameter hose piece: 43 mm
Outside diameter of hose piece: 50 mm
Outside diameter filter housing: 155 mm
Total height: 150 mm
Electropump for liquids NOVAX 30 BCapacity: 5000 l/hourSelf priming liquid ring pump with electromotorWithout bypassCan pump in both directions Suitable for alimentary liquids, such as water, wine, wort, milk and vinegarWith standard VITON sealPower 1000 W | 1,2 pk (1450 RPM)Hose barb: 30 mmMaximum head: 8 metresPower supply: 230 V/50 HzMaximum temperature: 95°CDon't let the pump run dry.
Small but effective 12v pump for home brewers. Can be used for circulating wort during mashing. Also ideal for pumping wort to your fermenter. Heat resistant up to 85°C
Specifications:
Brushless motor. Very Silent
Easy to clean
Low in energy consumption.
Max. flow rate 9-10L per minute
Supplied with 2 1/2" hose barbs.
Power supply included.
This pump is only suitable for pumping clean liquids. Impurities such as hop recidue will clog the pump. This pump is not self-priming. To prolong its life, we do not recommend turning the pump on without contact with liquid.
Pump with electric motor NOVAX 30 M
Flowrate: 5000 l/hLiquid ring pump, self-priming with electromotorWithout bypassPump operable in 2 directions. Suitable for pumping clear or lightly charged food liquids, such as water, wine, wort, etc.With NBR axial sealPower supply: 230 V, 50 Hz.Max head: 15 mConnection: 30 mmPower: 650 W | 1 hp, 1450 rpmMaximum temperature: 35°CDon't let the pump run dry.
Cage Aspiration Filter: 35 mm
Inner diameter hose piece: 28 mm
Outside diameter of hose piece: 35 mm
Outside diameter filter housing: 150 mm
Total height: 145 mm
Electropump for liquids NOVAX 25 MCapacity: 2400 l/hourSelf priming liquid ring pump with electromotorWithout bypassCan pump in both directions Suitable for alimentary liquids, such as water, wine, wort, milk and vinegarWith standard NBR sealPower 420 W/0,6 pk (1450 RPM)Maximum head: 12 metresPower supply: 230 V/50 HzMaximum temperature: 35°CDon't let the pump run dry.
Great Value basket filter with electropump, especially intended for pre-filtration of liquid foods such as must, fruit juices, low alcohol herbal extracts etc. Convenient compact design with handle.
Spacious stainless steel basket sieve with fineness 200 μ.
Pump with stainless steel housing (without bypass).
Suitable for filtering slightly hazy foods (liquids such as wine, beer, juice or water).
With standard NBR seal for liquids up to max. 60 ° C.
Hose connection to pump: 25mm
Hose connection to basket filter: 30 mm
Engine: 0.6hp, 230volt, 50Hz, 1450 rpm
Capacity: up to 5000 l / hour