€259.95* €282.80*
Silicone O-ring Set for soda kegs (ball-lock)
€2.95*
Set of replacement silicone O-rings for use on cornelius keggs
Available
Fermenter King Junior 20l
€59.95*
Ferment and serve from the same tank with the Fermenter King Junior from Keg King. Made from clear, high-quality PET, you can ferment your beer under pressure, and then serve it directly out of the fermenter by hooking it up to your kegerator/tap system.
At 20 L, the Fermenter King Junior will hold the same as a cornelius keg and you easily fit two in your kegerator.
A spunding valve will be required to control the internal pressure of the fermenter. (5016419 or 5016418)
Available
Soda Keg (Used) 9 l
€84.95*
Do you think a new Soda Keg is a bit too pricey? Maybe this used Soda Keg will fit your budget a little better.
This smaller 9 L soda kegg has been fully checked and equipped with new gaskets and o-rings. It has also been thoroughly cleaned and polished. Due to the thorough check, these Kegs can last for years to come.
Specifications:
Content: 9 L
Material: Stainless Steel
Connection: Cornelius
Equipped with new O-rings and gaskets./li>
NB! Limited stock available.
Available
Cannular Visy Chuck
€37.95*
This attachment should be used if you do not use the cans available on our website. The attachment is designed to seal cans from the Ardagh Group with CDLE/CDL closure.
few Available
Spunding Valve
€39.95*
Use this Spunding Valve from Keg King to set the desired pressure in your pressure fermenter. Simply attached to the fermenter gas disconnect and set the pressure using the adjustable valve. When the pressure reaches the set PSI/Bar, the valve will relieve the pressure out of the fermenter.
The gauge displays up to 15 PSI. Constructed of brass with steel spring to control the internal poppet.
Available
Crown Caps O2 absorbing 26 mm COPPER 10500 st
€149.95*
O2 absorbing crown caps, equipped with a special liner, which absorbs the oxygen that is in the bottle neck after bottling.The beer is protected against oxidation in this way, so that it can be stored longer.
Specifications:
26 mm crown cap
special oxygen-absorbing liner
is activated when humidified, therefore we recommend that you only moisten or disinfect the crown caps just before use.
colour copper
quantity: 10500 pieces.
these Crown Caps have a harder inlay, please ensure that sufficient force is exerted to achieve a good seal. We recommend using a bench capper.
Available
Short Shank for Ultratap
€15.95*
These stainless steel Short Shanks are suitable to attach taps to a font.
few Available
Ultratap Twist Auto Close Spring
€6.95*
The Ultratap Twist Auto Close Spring can be inserted into the Ultratap to return the handle to the closed position automatically after pouring, creating even more convenience for this innovative flow control product.
The spring is designed to fit the unique flow control feature at the back of the tap and will sit between your tap and your shank.
Note - the Auto Close Spring was designed for the Ultratap (non-twist) and will not work on the Ultratap Twist.
Available
Picnic Tap Black
€3.95*
This picnic tap faucet is used for a variety of applications, replacing worn out parts on party taps, or for dispensing home brew.
1/4" barb hose connection. We recommend hose 6 x 8 for use on the tap.
Available
Beertap plug with brush black 1 pc
€1.95*
A small but effective tool to keep your beertaps clean and sanitary. This durable brush will keep fruit flies out of your beer taps.
Specifications:
Overall length 6 cm.
Brush length: 2.3cm
not Available
Crown Caps O2 absorbing 26 mm SILVER 10500 pcs
€149.95*
O2 absorbing crown caps, equipped with a special liner, which absorbs the oxygen that is in the bottle neck after bottling.The beer is protected against oxidation in this way, so that it can be stored longer.
Specifications:
26 mm crown cap
special oxygen-absorbing liner
is activated when humidified, therefore we recommend that you only moisten or disinfect the crown caps just before use.
colour silver
quantity: 10500 pieces.
these Crown Caps have a harder inlay, please ensure that sufficient force is exerted to achieve a good seal. We recommend using a bench capper.
Available
Beer Dispenser with ballock fitting
€24.95*
An easy to use beer dispenser with ball-lock connection. Fits all soda kegs with ball-lock connections.
Package includes:
1 Pluto beer gun.
1 Ball-lock connector for Beer.
2 metres of beer line
2 Hose clamps.
not Available
Tapcooler PR Valve drain tube
€6.95*
Having issues with foam and beer leaking from the Tapcooler Counter Pressure Bottle Filler? This pressure relief drain tube hooks directly up to the pressure relief valve of the Tapcooler to drain away excess beer and foam! Measuring 1 meter long, the end of the tube can be placed in a growler or other receptacle so you can keep filling bottles without spillage.
Available
Keg Jacket for used keg 18L
€19.95*
Neoprene Jacket for used 18L Kegs. Keeps your beer nice and cool on a hot summer day.
Be advised! This jacket is not suitable for out new 19L Soda Keg.
Available
Ultratap Twist
€59.95*
Ultratap Twist from Keg King takes their innovative Ultratap design with laminar flow, and provides a flow control feature that can be operated with one hand directly on the tap handle.
When pouring small glasses for paddles, samples or small serves, or simply to control the flow on lively beers, the Ultratap Twist enables precise flow control without making a mess.
Many taps on the market have a flow control mechanism, however, with the Ultratap Twist, this is built into the handle, meaning you can pour and control the flow with one hand, whilst holding your glass with the other.
Simply turn the handle clockwise or counter clockwise to increase or decrease the flow rate.
Available
Tapcooler Nanocanner Can Holder
€79.95*
The Tapcooler already revolutionized bottle filling under counterpressure, and now they've done the same for cans! This is the Tapcooler Nanocanner™.
If you already have a Tapcooler counterpressure filler, you can start filling cans with this Nanocanner™. Purchase it with one of the mounting brackets and you can fill cans like the professionals do.
The Tapcooler Nanocanner™ can be used for all cans with standard 202 closure such as the cans available on our website.
Be adviced! You do need a can shutter such as the Cannulator to seal the cans.
Available
8 %
New
Tapcooler Nanocanner Kit incl. Magnetic Bracket
Always wanted to fill beercans like a pro? With the Tapcooler Nanocanner Set, you have all the parts you need to easily fill directly from your keg or unitank.
The set includes the following items:
Tapcooler counterpressure filler
Tapcooler Nanocanner Can Holder
Tapcooler Ball-lock adapter
Tapcooler Beer valve keg connector
Beer valve connector for Soda-Kegg Ball-Lock
Co2 connection set incl. couplings
Draught cooler PR Valve drain tube
Tapcooler Nanocanner magnetic bracket
Please note. Beer cans and can sealer and are not included in the set.
not Available
Tapcooler Handsfree Clip
€11.95*
The Tapcooler bottle holder is used to attach the Tapcooler to the neck of the bottle so that you have your hands free.
The height can be adjusted to different bottle necks and fits most bottle types with 26 mm crown corks.
Available
Crown Caps O2 absorbing 29 mm BLACK 8500 pcs
€119.95*
O2 absorbing crown caps, equipped with a special liner, which absorbs the oxygen that is in the bottle neck after bottling.The beer is protected against oxidation in this way, so that it can be stored longer.
Specifications:
26 mm crown cap
special oxygen-absorbing liner
is activated when humidified, therefore we recommend that you only moisten or disinfect the crown caps just before use.
colour: black
quantity: 8500 pieces.
these Crown Caps have a harder inlay, please ensure that sufficient force is exerted to achieve a good seal. We recommend using a bench capper.
Available
Crown Caps O2 absorbing 26 mm GOLD 10500 pcs
€149.95*
O2 absorbing crown caps, equipped with a special liner, which absorbs the oxygen that is in the bottle neck after bottling.The beer is protected against oxidation in this way, so that it can be stored longer.
Specifications:
26 mm crown cap
special oxygen-absorbing liner
is activated when humidified, therefore we recommend that you only moisten or disinfect the crown caps just before use.
colour goldquantity: 10500 pieces.
these Crown Caps have a harder inlay, please ensure that sufficient force is exerted to achieve a good seal. We recommend using a bench capper.
Available
Ultratap Stainless Steel
€42.95*
The Ultratap from Keg King with forward seal design provides users with a high performance tap that works in any sized draught system, from small short draw kegerators to large, long-draw commercial beverage dispense operations.
Ultratap’s patented all stainless steel construction utilises 21st century, laser-precision manufacturing techniques that create a smoother, more sanitary product.
Available
Tapcooler Counter Pressure Bottle Filler
€89.95*
The Tapcooler counterpressure bottle filler is an easy-to-use filling device for beer bottles. The Tapcooler ensures perfect filling of beer from a beer tap under counter pressure without loss of CO2.
The Tapcooler is a compact back pressure filler that connects to the tap and can also be connected to kegs and pressure tanks with optional adapters. Suitable for Vent-Matic, Perlick 600 series, Ultratap, Nukatap and Intertap. With optional tap connection can also be used for Perlick 500 and Alpha taps.
The operation of the Tapcooler is very simple: The bottle is put under CO2 pressure and then filled with beer by slowly releasing the Co2. You can connect the Tapcooler to the corresponding tap or - with the optional adapter - to a beer keg. The counterpressure filler has an adjustable pressure valve that controls the pressure in the bottle and thus the filling speed. CO2 and beer are filled from the bottom of the bottle through the filler pipe. The pipe can be extended to a length of 29 cm. You can use it to fill 0.3 l, 0.5 l or even larger bottles, but with a mouth size of up to 29 mm.
Specifications:
Mouthpiece adapter Push-Fit on hoses with an inner diameter of 6 - 8 mm
Push-Fit direct connection for hoses with an outer diameter of 4.8 mm
Length full filling tube: 29 cm
Max. bottle opening: 29 mm
Material: stainless steel (SS304)
Available