Easybrew Chillercoil for 30L bucket
€89.95*
The Easybrew Chillercoil is one of those tools that can help you brew better beers.
The Chillercoil allows you to control the fermentation temperature of your wort.
Specifications:
Material: 304 stainless steel
Coil Length: 4.7m.
Hole for airlock.
Available
Apollo 60 l Unitank Pressure Fermenter kit
€199.95*
The Apollo 60 L Unitank Pressure Fermenter is big enough to match your homebrewing ambitions! Pressure ferment and carbonate a double batch of quality craft beer in one 60 L tank.
With its conical shape, clear, high-strength PET build, and high level of fermentation control, the Apollo allows you to ferment under pressure, with confidence.
Product Specifications:
Stainless steel plunge valve and collection bottle for dumping trub and harvesting yeast
A dry hop port for sanitary dry hopping
Centralised floating dip tube for clear transfers
Thermowell to monitor the internal temperature
Built in handles
CIP Capability
True conical shape
Stainless steel stand with castors
When finished, the beer can be served directly from the fermenter, or transferred to a keg without introducing oxygen. Each unit is pressure tested straight off the production line.The Spundy from Keg King is a neat little gadget that works as well as any spunding valve on the market. With a low profile - just 4.5 cm tall - the Spundy doesn't take up much room in fermentation chambers or kegerators.
few Available
Apollo 30l Unitank Pressure Fermenter
€159.95*
The Apollo 30 L Unitank Pressure Fermenter takes brewing to new heights. This is the perfect fermenter to get into pressure fermentation, allowing you to ferment and carbonate in one vessel, meaning you get to drink your beer sooner.
With its conical shape, and clear, high-strength PET build, the Apollo allows you to ferment quality beer, under pressure, with confidence.
Specifications:
Stainless steel plunge valve and collection bottle for dumping trub and harvesting yeast
A dry hop port for sanitary dry hopping
Multi pressure option PRV selection - select the pressure setting from the 3 x PRVs included
Centralised floating dip tube for clear transfers
Thermowell to monitor the internal temperature
Built in handles
True conical shape
Stainless steel stand
When finished, the beer can be served directly from the fermenter, or transferred to a keg without introducing oxygen. Each unit is pressure tested straight off the production line.
Available
Jacket for Apollo 60l Unitank
€89.95*
This Jacket from Keg King fits the Apollo 60L Unitank. The Jacket will help control the temprature when fermenting. Especially helpfull when doing tempreture controlled fermentation.
Available
Keg King Chubby 30 L Pressure Fermenter
€69.95*
The 'Chubby' is a 30 L pressure fermenter from Keg King - the next step up from the Fermenter King Junior. At 30 L in volume, this pressure fermenter is designed for full batches, and fits perfectly in a fermentation chamber. Made from clear, high-quality PET, you can enjoy all the advantages of pressure fermentation for batches 23-25 L, with plenty of headspace.
The Chubby lid features a gas and liquid post, as well as a PRV port, meaning gas and liquid are easily controlled for transfers, fermentation pressure and serving.
Brewers can extract bright, clear beer after fermentation by way of the floating diptubes that come standard with each Chubby fermenter. It also comes with stainless steel handles for easy transportation and the super smooth interiors make it easy to remove fermentation debris, making clean up simple.
Dimensions:
Height: 595mm
Width: 300mm
few Available
Spundy
€19.95*
The Spundy from Keg King is a neat little gadget that works as well as any spunding valve on the market. With a low profile - just 4.5 cm tall - the Spundy doesn't take up much room in fermentation chambers or kegerators.
Spundy provides brewers with the ability to set the pressure control simply by turning the black valve tip clockwise to increase pressure or counter clockwise to release.
The built in pressure gauge lets brewers see exactly what pressure is being held from 0 to 30 PSI (2 Bar).
Spundy's pressure gauge unscrews for easy cleaning and can even be used with a pre-set PRV (pressure relief valve).
Replacing the valve tip with a PRV gives brewers the advantage of preselecting the pressure they want to hold before there is pressure present.
Available
Apollo 30l Snub Nose
€129.95*
The Apollo 30 L Snub Nose Pressure Fermenter takes brewing to new heights. This is the perfect fermenter to get into pressure fermentation, allowing you to ferment and carbonate in one vessel, meaning you get to drink your beer sooner.
With its conical shape, and clear, high-strength PET build, the Apollo allows you to ferment quality beer, under pressure, with confidence.
Specifications:
A dry hop port for sanitary dry hopping
Multi pressure option PRV selection - select the pressure setting from the 3 x PRVs included
Centralised floating dip tube for clear transfers
Thermowell to monitor the internal temperature
Built in handles
True conical shape
Stainless steel stand
When finished, the beer can be served directly from the fermenter, or transferred to a keg without introducing oxygen. Each unit is pressure tested straight off the production line.
Available
Grainfather SF50 Conical Fermenter
€395.00*
The SF50 has a 50-litre capacity and is designed to hold up to 45 litres of wort. The SF50 can be adapted to your needs with an adjustable leg height and caster wheels for easy manoeuvrability. Its intuitive design, 304 stainless steel construction and 113° tapered design make both fermentation and cleaning easy. A perfect companion for smaller brewing systems such as the S40, G30 or G40 and the easybrew sb30p, Brewmonk or Brewster Beacon.
Specifications:
The SF50 is made of high-quality 304 stainless steel.
Adjustable leg height and comes with castors.
Easy yeast dumping with the dump valve.
Built-in thermowell.
Easy sampling with the sample valve placed above the yeast line.
Compatible with the Glycol Chiller Adapter Kit (GCA).
2-year warranty
Product Dimentions:
Size: 886x508mm (Legs at highest position)
Weight: 10 kg
Capacity: 50l (Max 45 litres of wort)
Conical angle: 113°
Available
Insulation Jacket for FB60 Fermenter
€37.95*
The Easybrew insulation jacket is a handy accessory for those cold winter days. It will help you to keep the temperature in your fermenter during colder days to prevent your fermentation from stalling.
not Available
Easybrew Chiller for 60L Bucket
€89.95*
The Easybrew Chillercoil is one of those tools that can help you brew better beers.
The Chillercoil allows you to control the fermentation temperature of your wort.
Specifications:
Material: 304 stainless steel
Coil Length: 13m.
Hole for airlock.
Available
Easybrew Fermenting Bucket 30L with Thermowell
€169.95*
30 liter stainless steel conical fermenter, ideal for brewing up to 25 liters. The conical bottom concentrated the yeast depot so that you can easily get clear beer through the ball valve in the cone.
Since the lid covers the entire width of the fermenter, just like a bucket, this fermenter is super convenient to clean. Caution: do not lift the fermenter when full.
Included in the lid is 150mm Thermowell where you can easily insert a temprature probe for temprature controlled fermentation.
Specifications:
volume: 30 l
stainless steel lid with silicone seal and cylindrical airlock
Stainless steel Thermowell (150mm)
matte stainless steel finish (AISI 304)
equipped with conical bottom
3 feet2 stainless steel handles
thermometer 0-40°C
3/8" ball valve in the cone
dump valve on conical bottom with 1/2" stainless steel valve
volume markings on the inside (liters / gal)
Dimensions: Height 58 cm, diameter 35cm.
Available
Spunding Valve
€39.95*
Use this Spunding Valve from Keg King to set the desired pressure in your pressure fermenter. Simply attached to the fermenter gas disconnect and set the pressure using the adjustable valve. When the pressure reaches the set PSI/Bar, the valve will relieve the pressure out of the fermenter.
The gauge displays up to 15 PSI. Constructed of brass with steel spring to control the internal poppet.
few Available
Fermenter King Junior 20l
€59.95*
Ferment and serve from the same tank with the Fermenter King Junior from Keg King. Made from clear, high-quality PET, you can ferment your beer under pressure, and then serve it directly out of the fermenter by hooking it up to your kegerator/tap system.
At 20 L, the Fermenter King Junior will hold the same as a cornelius keg and you easily fit two in your kegerator.
A spunding valve will be required to control the internal pressure of the fermenter. (5016419 or 5016418)
Available
Insulation Jacket for FB30 fermenters
€27.95*
The Easybrew insulation jacket is a handy accessory for those cold winter days. It will help you to keep the temperature in your fermenter during colder days to prevent your fermentation from stalling.
few Available
Airlock CLASSIC (1 - 50 litres)
€1.15*
Classic airlock for barrels from 1 L up to 50 L. Classic twin-bubble models are cheaper, but more difficult to clean than cylindrical airlocks.
For barrels from 1 L up to 50 L
Dimensions (Ø x H): 1 cm x 16 cm
Suitable for an opening of 9 mm
Fill the airlock with a little water or disinfection solution so it acts as a siphon; the beer is closed of from the outside air by the water, hence preventing bacteria to enter. However the carbon dioxide formed during fermentation can escape.
The water in the airlock evaporates, so regularly checking and refilling is necessary!
Available
New
Grainfather GC2 Glycol Chiller with Glycol & Cooling connection kit
€795.00*
Control and power up to two fermenters at different temperatures and fermentation schedules with the GC2. By accurately controlling the temperature of your fermentation, you can produce consistent beers, every time. The Chiller will be shipped with Glycol and one Cooling connection kit.
Features:
Control and power up to two fermenters at different temperatures and fermenting schedules.
Use with the GCA Glycol Chiller Adapter to connect to the Grainfather S SERIES range of fermenters or most other fermenters.
Sleek and compact design with LED control display
Compatible with the Grainfather App when connected to a Grainfather G SERIES fermenter or the GCA for managing your fermentation from anywhere via Wi-Fi
Backed by a 3-year warranty
Dimensions:
583 x 320 x 363mm
19.5kg
3L Glycol tank
Package content:
GC2 Glycol Chiller
Propylene glycol*
1 x Cooling connect kit
Glycol funnel
Silicone tubing for priming pump
not Available
Oak Cask 5 litre
€109.95*
The cask is made from French Oak, with a medium toast level. The cask is suitable for keeping spirits, wine, oils & vinegar in it. It can also contain beer, though most breweries in that case use casks that were previously used for storing and maturing spirits. The cask comes with rack, stopper, wooden faucet and a sealing plug.
Before use, first fill the cask with water for 24 hours, If there are no leaks rinse the cask to remove any production residues such as sawdust.
If there are any small leaks, change the water and leave for another 24 hours. Never leave the water for more than 24 hours.
A cask can be water tight but not spirits tight. This is due to the ethanol in spirits making the liquid less dense. Therefore, always swell the cask with water before filling it with spirits.
Available
Bucket Semi-Transparent with Lid 5 litres
€4.95*
Semi-transparent bucket made from foodgrade HDPE. Lid Included.
Volume 5 litres
Complete with Handle
Lid with guarantee closure
Graduation
Natural Colour / semi transparent
Size: height 18,7 cm Ø 23,8 cm
Important: Bucket is without spigot.
Available
Speidel Juice Container 170 Litres, with Floating Lid
€429.95*
Juice can be stored for months in this stainless steel barrel, because the lid floats on the surface of the juice. Can also be used as a fermentation vessel for cider, wine or beer.
Specifications:
Content: 170 Liter
Hight 77 cm
Diameter 55 cm
Floating Lid
Tap included
Stainless Steel
Weight: 15 kg.
few Available
Airlock Ball Model
€1.15*
Airlock for barrels from 1 L up to 50 L.
For barrels from 1 L up to 50 L
Dimensions (Ø x H): 1 cm x 16 cm
Suitable for an opening of 9 mm
Fill the airlock with a little water or disinfection solution so it acts as a siphon; the beer is closed of from the outside air by the water, hence preventing bacteria to enter. However the carbon dioxide formed during fermentation can escape.
The water in the airlock evaporates, so regularly checking and refilling is necessary!
Available
Brewing Bucket Semi-Transparent Complete - 5 litres
€7.95*
Semi-transparent bucket made from foodgrade HDPE. Contains of a lid (with pre-drilled hole), volume indicator, handle, spigot, airlock and silicone plug for airlock.
Perfect as fermenter or bottling bucket.
Volume: 5 litresWidth with lid : 23,8 cm
Height with lid : 18,7cm
Diameter : 23,8 cm
Important: Mount the rubber ring of the spigot on the outside of the bucket. Tighten the nut on the inside carefully. Overtightening can cause leakage!
Available
Oak Cask 3 Litre
€99.95*
The cask is made from French Oak, with a medium toast level. The cask is suitable for keeping spirits, wine, oils & vinegar in it. It can also contain beer, though most breweries in that case use casks that were previously used for storing and maturing spirits. The cask comes with rack, stopper, wooden faucet and a sealing plug.
Before use, first fill the cask with water for 24 hours, If there are no leaks rinse the cask to remove any production residues such as sawdust.
If there are any small leaks, change the water and leave for another 24 hours. Never leave the water for more than 24 hours.
A cask can be water tight but not spirits tight. This is due to the ethanol in spirits making the liquid less dense. Therefore, always swell the cask with water before filling it with spirits.
Available
Grainfather GF30 Conical Fermenter Pro
€649.00*
Ferment like never before!
The Grainfather Conical Fermenter Pro gives brewers professional fermentation control, just like the commercial breweries! The Grainfather Conical Fermenter Pro allows you to control the heating of your unit (and cooling with the Glycol Chiller), dump yeast, take samples and transfer wort via our innovative dual function valve design. The 60-degree (Golden Angle) cone allows for optimum yeast/sediment drop down, giving you clearer beer.
The Conical Fermenter Pro comes with a built-in controller with wireless connectivity and sleek digital display. This means your customers can connect the controller to the internet and Grainfather App and track fermentation with automatic alerts and notifications from wherever - at work, playing golf, fishing...anywhere with an internet connection.
Content of the box:
Conical Fermenter
Fermenter Lid
Rubber Bung
Bubbler Airlock
Cone Plug
Cone Plug Seal 5 cm (2")
Tri Clamp
Digital Temperature Display
Power Adapter and Wall Plug 2 m (6.5 ft)
Dual Valve Tap
Digital Temperature Controller (Wifi)
Specifications:
304 Stainless Steel Body (polished inner and brushed outer)
30 L (8 US Gal) capacity (volume markings on inner body up to 25 L (7 US Gal)
30 W, 12 V heating power
3.8 cm (1.5") ferrule on lid (for pressure transfer attachments)
5 cm (2") ferrule on bottom of cone
Dual Valve Tap with 110 mm (4.3”) inlet
Dimensions of Conical Fermenter:
Diameter with handles: 360 mm
Height (without airlock): 910 mm
Height with bubbler airlock: 1090 mm
Available