Alcohol filled thermometer -10 ° c-+ 110 ° c. For measurements of must, wine, beer and alcohol preparation. Thin model, easy to read because of the red liquid inside the thermometer.
Please note that the accuracy of this type has a tolerance of 2-5%, so this thermometer is only recommended for the maisch process after calibration.
New digital thermometer with LED digital display screen, extended stainless steel probe and large measurement range. It has a Hold Function, Celsius and Fahrenheit Switch Function and Calibration Function. It folds and it's easy to carry and it also has a Auto Shut Off Function after 10 minutes without any operations. Suitable for measuring temperature of food, refrigeration, heating, food processing and home kitchen.
Specifications:
Range: -50 to 300°C (-58 to 572°F)
Resolution 0,1°C or 0,1°F
Accuracy: ±1°C (0 to 150 °C), ±2~3°C in other ranges
Power: 1x AAA 1.5 V
Dimensions: 154,3x37,8x22 mm
With this digital (meat)thermometer you can read the temperature quickly and accurately. Ideal for measuring the core temperature during a barbeque.The stainless steel probe is easy to clean. Also suitable for measuring the mash temperature during beer brewing and other taskswhere accurate reading of the temperature is desirable.
Specifications:
Waterproof design
Temperature range: -50°C to 300°C (-58°F- 572°F)
Temperature Accuracy: ±1°C(±2°F) from -20 to 200°C
Probe Length: 127mm (5 inch)
Quick readout in 2 seconds with an accurate temperature reading
Ultra-bright on-screen LCD display
Safety and tidiness with the collapsible probe design
Hold the temperature reading before removing the probe from the food.
Accurate reading with the step-down probe design
Probe material: Food grade 304 steel
Very useful model.
Stainless steel feeling bar with pointed edge.
Range: -50 to + 300 ° C.
150 mm long,
with stainless steel sensor 70 mm.
Direct reading per 0,1 ° C.
Protective sleeve included.
Waterproof. Battery included.
Very useful model.
Stainless steel feel bar (12 cm) with pointed edge.
Range:-50 to + 300 ° c
Immediate reading per 0.1 ° C
Vest pocket-clip-sleeve included
Including coin cell battery
Professional model thermometer with stainless steel sensor (60cm wire) very suitable for the discerning brewer. Suitable for measuring: Foods (HACCP) Air Gas Liquids Plastic Accurate display up to 0.1 ° C, between -25 and 150 ° C to one degree accurately out of the range up to 1.5 ° C. Hold function, Min-Max function, IP65 waterproof
Thicker thermometer with a plastic protection sleeve with suspension-eye. Ideal as f.e. Maisch-thermometer. Easy to disassemble for cleaning. With red alcohol scale for easy reading.
Scale: -10-+ 110 C
Length: 28 cm.
Professional Jet/splashproof HACCP suitable digital thermometer
Range:-40 to + 250
Deviation:-30 to 150 +/-0.5% above that +/-1%
IP65
HACCP food suitable
Very fast measuring
Features:
CE certified!
EU plug/sockets!
Large and clear LCD displays with target temperature and actual temperature
Dual heating and cooling function
Automatic over-temperature and sensor fault alarm
Temperature calibration
Compressor delay protection for refrigeration control
Detachable probe
Specifications:
Control temperature range: -50 ~ 99 °C (adjustable)
Resolution: 0.1 °C
Accuracy: ± 1 °C (-50 ~ 70 °C)
Relay contact capacity (Heating): 10 A (max) 240 V
Relay contact capacity (Cooling): 10 A (max) 240 V
Sensor cable length: 2 m
Power cable length: 1.5 m
Outlets cable length: 30 cm
The Inkbird ITC-308S is a pre-build outlet thermostat/temperature controller: simply plug in, set the temperature and you're done! With WIFI controller + fee App "InkbirdSmart" (IOS and Android), allows you to monitor and control the temperature everywhere. Features:CE certified!EU plug/sockets!Large and clear LCD displays with target temperature and actual temperatureDual heating and cooling functionAutomatic over-temperature and sensor fault alarmTemperature calibrationCompressor delay protection for refrigeration controlWith WIFI controller + free App "InkbirdSmart" (for IOS and Android), allows you to monitor en control the temperature everywhere. Specifications:Control temperature range: -40 ~ 100°C (°C/°F vadjustable)Resolution: 0.1 °CAccuracy: ± 1 °C (-50 ~ 70 °C)Relay contact capacity (Heating): 10 A (max) 240 VRelay contact capacity (Cooling): 10 A (max) 240 VSensor cable length: 2 mPower cable length: 1.5 mOutlets cable length: 30 cmSize: Body: 140 x 68 x 33 mm / Socket: 135 x 54 x 40 mmWeight: 350 g
The Milwaukee TH310 compact digital temperature meter is suitable for numerous applications. The meter is durable, operates digitally, is fast and accurate and, most importantly, is environmentally friendly because it contains no mercury or glass. From home-brewed beverages to laboratories and aquarium enthusiasts, the TH310 Stainless Steel Stick probe is your quick temperature meter.
Fast, accurate results with large digital LCD readout.
Extended temperature range: -50 to 150°C (-58 to 302°F).
Cal-Check feature.
Fast NTC sensor response.
Easy measurement: just place the stainless steel probe in the sample and wait for the reading to stabilize.
Easy sharp Stainless Steel temperature shaft for quick penetration.
Stainless Steel probe for easy cleaning.
Long battery life, approx. 3000 hours of continuous use (batteries included).
High accurate digital readings.
The RAPT Wi-Fi Temperature Controller lets you remotely monitor and control heating and cooling devices via the internet. You can set custom temperature profiles to automatically adjust over time. It works with the RAPT app, available for both Android and iOS, allowing for easy control and push notifications.
This plug-and-play controller has two power outlets (blue for heating, red for cooling), each rated for 10A (2400W max). It features a clear color screen, PID heating for stable control, and a temperature range of -20°C to 120°C. The device is versatile, with multiple mounting options including panel, hanging, or on top of a fridge or brewery.
Compatible with the RAPT web portal, it lets you track, log, and control temperature remotely for optimal device management.
DIGITAL THERMOMETER-TIMER-WATER RESISTANT: IP65.
° C/° F
Display Resolution: 0.1 °
Functions: Alarm-Timer-Magnet
Stainless steel piercing probe: 125 mm-ø 3.5 mm
Manual in several languages.
The Milwaukee TH300 compact digital temperature meter is the perfect solution for accurate temperature measurement in hard to reach places due to its 1 meter long cable. The meter works digitally, contains no mercury and glass and is therefore environmentally friendly. With this meter you keep the temperature of your brews quickly and precisely within your target range.
Fast, accurate results with large digital LCD readout.
Extended temperature range: -50 to 150°C (-58 to 302°F)
Easy measurement: just place the stainless steel probe in the sample and wait for the reading to stabilize.
Easy, flexible 1 meter cable for hard to reach places.
Stainless Steel pointed probe for easy fruit penetration and easy cleaning.
Long battery life, approx. 1 year. (batteries included)
High accurate digital readings.
This low-energy Bluetooth thermometer is designed for use with Gen 4 BrewZillas, RAPT Temperature Controllers, and RAPT Fermentation Chambers. It helps automate and improve brewing or distillation by providing precise temperature readings from multiple sensors. For example, you can monitor coolant water temperature or accurately control malt pipe temperature.
It connects to the RAPT portal for easy logging and control of your brewing profiles. You can set custom temperature profiles and receive push notifications, eliminating the need for handwritten records.
Specifications:
20cm probe with sharp tip (remove plastic tip before use)
100cm cable length
Magnetized backing plate
Includes 2 x AAA batteries
Note: Works only with compatible RAPT devices.
The KegLand Wireless Charging Kit for the RAPT Pill Hydrometer allows for easy charging without needing to disassemble the device or connect to the RAPT Captive Portal. Simply place the RAPT Pill on the charging pad for 24 hours or until the red light turns off. Once charged, lift it off the pad to activate the captive portal (green light flashing).
Includes:
1 x USB-C Wireless Charging Coil
2 x Adhesive Weight Pads
1 x USB-A to USB-C Cord (AU plug not included)
1 x Black Wireless Charging Dock (USB-C)
Specifications:
Qi-certified, works with other Qi devices like phones.
The Bluetooth Temperature & Humidity Smart Sensor IBS-TH1 Plus Data logger can be easy to pair with our Android and IOS phones.
The temperature and humidity will display on screen. Which will provide the ideal solution for monitoring T&H conditions. The IBS-TH1 Plus can perfectly monitor your home, car, clothes, pets, cigars, beer, meat, greenhouse and much more.Specifications:Dimension: 63.5mmx20mm
Weight: 53g
Batteries: 2x AAA (not included)
Bluetooth range: 30 meters
Temperature range: Internal probe: -40°C-60°C External probe: -40°C-100°C
Humidity range: 0-99% RH
Infra Red thermometer-50 + 380 ° c/-58 + 716 ° F laser pointer
Resolution: 0.1 °
Accuracy: ± 2%/2 ° C
Distance ratio: 12/1
Fixed Emissivity: 0.95
Data Hold
Backlight
with pouch and batteries
Instructions for use
In hanging box
A versatile and very accurate digital thermometer. Thanks to the adjustable temperature alarms this thermomether is ideal for brewing, as well as checking the fermentation temperature.
WATERPROOF MODEL WITH DETACHABLE SENSOR.
Long food-safe stainless steel sensor withpointed edge and 100 cm cord
Dimensions: 3.5 x 145 mm
reading in ° c and ° f
wide temperature range: -50 to + 300 ° c
temperature interval: 0.1 ° c from-19.9-+ 199.9. Beyond 1 °C
including battery memory function (min/max)
alarm function
"hold" function
€43.95*
This website uses cookies to ensure the best experience possible. More information...