Cleaning Products
Arsegan PURO OXI ® 1000 gr
€6.95*
Cleaner for all slightly soiled materials and bottles. Does not need to be rinsed with water, but it's still recommended. By the released active oxygen is a thorough cleaning in a single treatment with a short contact time!
Dosage: 4 grams per liter of warm to hot water.
Contact time: 3-5 minutes. Attention: in case of a longer contact time harmless white calcium deposits may be left behind which can be easily removed by rinsing with a solution of acedic or citric acid.
Content: 1000 g (good for 250 liter cleaner)
Please note that it has the same active ingredient as Chemipro OXI, only it's much more favorably priced.
Not Available
Arsegan PURO OXI ® 100 g
€3.25*
Environmentally friendly cleaner for all lightly soiled materials and bottles. Does not need to be rinsed with water, but is recommended. Due to the release of active oxygen, hygienic cleaning is possible in one treatment with a short contact time!
Dosage: 4 grams per liter warm to hot water.
Contact time: 3 - 5 minutes.
Note: If the contact time is longer, harmless white limescale may remain, which can easily be removed by rinsing with a solution of citric or vinegar acid.
Contents: 100 grams (good for 25 liters cleaner)
Note: Contains the same active ingredient as Chemipro OXI, only it is priced much cheaper.
Not Available
Arsegan PURO OXI ® 5000 gr
€22.95*
Cleaner for all slightly soiled materials and bottles. Does not need to be rinsed with water, but it's still recommended. By the released active oxygen is a thorough cleaning in a single treatment with a short contact time!
Dosage: 4 grams per liter of warm to hot water.
Contact time: 3-5 minutes. Attention: in case of a longer contact time harmless white calcium deposits may be left behind which can be easily removed by rinsing with a solution of acedic or citric acid.
Content: 1000 g (good for 250 liter cleaner)
Please note that it has the same active ingredient as Chemipro OXI, only it's much more favorably priced.
Available
Sulfite powder (Campden) 150 gr
€4.95*
Universal cleaning agent for wine- and beermakers-tool.Used to prevent the oxidation of beer, wine and juice and to stop fermentation. It also kills wild yeast on fruit.
Sulfite is washed off easily after application (dosing 1 teaspoon/ltr), so that there is no residual in wine or must.
Mandatory warnings on the packaging:
R31: contact with acids liberates toxic gas.
R37: irritating to respiratory system.
R41: risk of serious damage to eyes.
S26: In case of contact with eyes rinse with plenty of water and seek medical advice.
S39: wear eye/face protection.
Keep out of reach of children.
Not Available
Sulfite powder & Citric acid Cleaning-set
€6.95*
Sulfite is a universal cleanser for wine and beer makers-tool, which after application can easily be washed away with water (dosage 1 level teaspoon/ltr) , so that there is no residual in wine or must.
Content: 150 grams sulfite + 30 grams of citric acid. By adding 1 knife point of citric acid to the sulfite solution , the solution will be extra powerful!
Mandatory warnings on the packaging:
R31: contact with acids liberates toxic gas.
R37: irritating to respiratory system.
R41: risk of serious damage to eyes.
S26: In case of contact with eyes rinse with plenty of water and seek medical advice.
S39: wear eye/face protection.
Keep out of reach of children.
Not Available
Sulfite powder (Campden) 1000 gr
€13.95*
Universal cleaning agent for wine- and beermakers-tool.
Sulfite is washed off easily after application (dosing 1 teaspoon/ltr), so that there is no residual in wine or must.
Mandatory warnings on the packaging:
R31: contact with acids liberates toxic gas.
R37: irritating to respiratory system.
R41: risk of serious damage to eyes.
S26: In case of contact with eyes rinse with plenty of water and seek medical advice.
S39: wear eye/face protection.
Keep out of reach of children.
Not Available
Arsegan PURO SAN ® 250 ml
€15.50*
Arsegan Puro San® is a strong foaming, acidic anionic final rinse for use in the food and beverage industry.
Characteristics:
Cleans tanks and equipment and avoids the build-up and deposit of minerals.
Not influenced by organic pollution.
Required contact time only 60 seconds.
Not suitable for soft metals and CIP systems.
Dosage: 15 to 25 ml per 10 liters of water.
Contents of this dispensing bottle: 250 ml (sufficient for approximately 160 liters of detergent)
Dutch operating manual.
Instructions for use and precautions:
Cover all food products thoroughly or remove them from the environment.
Use as a final rinse.
Before use, remove any debris or dirt by rinsing or sanding the surface and soaking if necessary.
Then wash or rinse all parts thoroughly with a good cleaning agent and then again with clean drinking water.
For every 10 liters of solution, use 15 to 25 ml of Arsegan Puro San®, mix well with clean water.
Apply the solution with a cloth, sponge or spray bottle (15-20 cm height), or soak the surface in the liquid.
The surface must remain wet for at least 1 minute, then air-dry,
Keep the packaging closed carefully and keep it in a well-ventilated place after use.
Keep well sealed and always out of reach of children.
Ingredients: phosphoric acid 50%, dodecyl-benzene sulfonic acid 5-15%
Precautions:
Arsegan Puro San® DO NOT MIX with chlorine-based cleaning agents because chlorine gas may be produced from them.
Arsegan Puro San® affects undiluted metal with a contact time of more than 60 seconds.
Not Available
Alcohol wipes 100 pc
€2.95*
Alcohol wipes to clean small surfaces quickly and safely and to sterilize them for use! (e.g. edges of buckets, water ditches, fermentation hack).Individually packaged100 pcs. in boxsize 65 x 30 mmsoaked in 70% alcohol
Available
Enzybrew 10 detergent pot 750 grams
€9.95*
ENZYBREW 10 breaks down the organic dirt that is left behind in the production of traditional beer, such as vegetable fibres, proteins and starch.
ENZYBREW 10 is a specific enzyme cocktail that guarantees a thorough cleaning that is safe for the materials and is ideal for cleaning filters, heat exchangers, yeast tanks, waiting bins and boilers.
Advantages
One cleaning cycle (saves time and water)
Non aggressive/non biting product so no risk of burns
Not harmful to the environment (>98% biodegradable)
Usage:
Dissolve 1% (10 g/L) in hot water (45-60 °C) and mix well.
Scrape or soak (or CIP) the material for 30 min.
Rinse with warm water
Developed and produced in Belgium!
Not Available
Spraybottle 500ml adjustable
€3.95*
Cleaning spray 500ml adjustable.Special 500ml atomizer with reservoir for atomization/spraying of dissolved cleaning products in order to reach any spot in the bottle or drum.
Available
Arsegan PURO SAN ® 500 ml
€23.50*
Arsegan Puro San® is a strong foaming, acidic anionic final rinse for use in the food and beverage industry.
Characteristics:
Cleans tanks and equipment and avoids the build-up and build-up of minerals.
Not affected by organic pollution.
Required contact time only 60 seconds.
Not suitable for soft metals and CIP systems.
Dosage: 15 to 25 ml per 10 liters of water.
Contents of dosing bottle 500 ml (for approximately 320 liters of detergent).
Dutch operating manual.
Instructions for use and precautions:
Cover all food products thoroughly or remove them from the environment.
Use as a final rinse.
Before use, remove any debris or dirt by rinsing or sanding the surface and soaking if necessary.
Then wash or rinse all parts thoroughly with a good cleaning agent and then again with clean drinking water.
For every 10 liters of solution, use 15 to 25 ml of Arsegan Puro San®, mix well with clean water.
Apply the solution with a cloth, sponge or spray bottle (15-20 cm height), or soak the surface in the liquid.
The surface must remain wet for at least 1 minute, then air-dry,
Keep the container closed carefully and keep it in a well-ventilated place after use.
Keep well sealed and always out of reach of children.
Ingredients: phosphoric acid 50%, dodecyl-benzene sulfonic acid 5-15%
Precautions:
Arsegan Puro San® DO NOT MIX with chlorine-based cleaning agents because chlorine gas may be produced from them.
Arsegan Puro San® affects undiluted metal with a contact time of more than 60 seconds.
Not Available
ECOLAB P3-alcodes 1000ml with spraynozzle
€19.95*
ATTENTION: This article is only in stock for professional use. PLEASE CONTACT CUSTOMER SUPPORT FOR YOUR ORDERS: Email: info@braumarkt.com / Tel: +31 (0)854839888Liquid alcohol-based disinfectant
- Applicable in the food industry, especially for small surfaces and materials.- Especially for small surfaces and materials, the product does not need to be rinsed. - Spray disinfection with concentrated product.- Admitted in the Netherlands under number 11369N
Not Available
Arsegan PURO CAUSTIC ® 1000 gr
€12.95*
The original cleaner with caustic soda and active chlorine, for heavily contaminated bottles and brewing materials. Removes even the most stubborn dirt and is also suitable for detaching labels. Use on glass, plastic and stainless steel, but DO NOT use on copper and iron!
Stainless steel in contact with Puro-Caustic solution for up to 1 hour
Dosage: 5 grams on 5 liters of hot-warm water
Let it soak in for 5-60 min. after that, rinse several times thoroughly with plenty of water.
Advantage pack of 1000 grams. Sufficient to produce 1000 liters of liquidVery favourable price-quality ratio, by far the most advantageous product in the European market!
Not Available
Arsegan PURO SAN ® 100 ml
€8.95*
Arsegan Puro San® is a strong foaming, acidic anionic final rinse for use in the food and beverage industry.
Characteristics:
Cleans tanks and equipment and avoids the build-up and deposit of minerals.
Not influenced by organic pollution.
Required contact time only 60 seconds.
Not suitable for soft metals and CIP systems.
Dosage: 15 to 25 ml per 10 liters of water.
Contents of bottle 100 ml (sufficient for approximately 65 liters of detergent)
Dutch operating manual.
Instructions for use and precautions:
Cover all food products thoroughly or remove them from the environment.
Use as a final rinse.
Before use, remove any debris or dirt by rinsing or sanding the surface and soaking if necessary.
Then wash or rinse all parts thoroughly with a good cleaning agent and then again with clean drinking water.
For every 10 liters of solution, use 15 to 25 ml of Arsegan Puro San®, mix well with clean water.
Apply the solution with a cloth, sponge or spray bottle (15-20 cm height), or soak the surface in the liquid.
The surface must remain wet for at least 1 minute, then air-dry,
Keep the packaging closed carefully and keep it in a well-ventilated place after use.
Keep well sealed and always out of reach of children.
Ingredients: phosphoric acid 50%, dodecyl-benzene sulfonic acid 5-15%
Precautions:
Arsegan Puro San® DO NOT MIX with chlorine-based cleaning agents because chlorine gas may be produced from them.
Arsegan Puro San® affects undiluted metal with a contact time of more than 60 seconds.
Not Available
Arsegan PURO CAUSTIC ® 100 gr
€3.75*
The original cleaner with caustic soda and active chlorine, for heavily contaminated bottles and brewing materials. Removes even the most stubborn dirt and is also suitable for detaching labels. Use on glass, plastic and stainless steel, but DO NOT use on copper and iron!
Stainless steel in contact with Puro-Caustic solution for up to 1 hour
Dosage: 5 grams on 5 liters of hot-warm water
Let it soak in for 5-60 min. after that, rinse several times thoroughly with plenty of water.
Convenient packaging of 100 grams. Sufficient to produce 100 liters of liquid
Very favourable price-quality ratio, by far the most advantageous product in the European market!
Available
Arsegan PURO SAN ® 1000 ml
€32.95*
Arsegan Puro San® is a strong foaming, acidic anionic final rinse for use in the food and beverage industry.
Characteristics:
Cleans tanks and equipment and avoids the build-up and build-up of minerals.
Not affected by organic pollution.
Required contact time only 60 seconds.
Not suitable for soft metals and CIP systems.
Dosage: 15 to 25 ml per 10 liters of water.
Contents of dispenser bottle 1000 ml (for approximately 640 liters of detergent).
Dutch operating manual.
Instructions for use and precautions:
Cover all food products thoroughly or remove them from the environment.
Use as a final rinse.
Before use, remove any debris or dirt by rinsing or sanding the surface and soaking if necessary.
Then wash or rinse all parts thoroughly with a good cleaning agent and then again with clean water.
For every 10 liters of solution, use 15 to 25 ml of Arsegan Puro San®, mix well with clean water.
Apply the solution with a cloth, sponge or spray bottle (15-20 cm height), or soak the surface in the liquid.
The surface must remain wet for at least 1 minute, then air-dry,
Keep the container closed carefully and keep it in a well-ventilated place after use.
Keep well sealed and always out of reach of children.
Ingredients: phosphoric acid 50%, dodecyl-benzene sulfonic acid 5-15%
Precautions:
Arsegan Puro San® DO NOT MIX with chlorine-based cleaning agents because chlorine gas may be produced from them.
Arsegan Puro San® affects undiluted metal with a contact time of more than 60 seconds.
Not Available
Grainfather High Performance Cleaner - 500 g
€13.75*
This is suitable for soft (copper) and hard (stainless steel) metals which not many other cleaners do. It is important you use this to clean your Grainfather as other cleaners may, over time, damage your system.
Dosage: 2 tablespoons per 15 litres of water
Not Available
Spraybottle 1000ml adjustable
€4.95*
Cleaning spray 1000ml adjustable. Special 1000ml atomizer with reservoir for atomization/spraying of dissolved cleaning products in order to reach any spot in the bottle or drum.
Available
Arsegan PURO CAUSTIC ® 5000 gr
€49.95*
The original cleaner with caustic soda and active chlorine, for heavily contaminated bottles and brewing materials. Removes even the most stubborn dirt and is also suitable for detaching labels. Use on glass, plastic and stainless steel, but DO NOT use on copper and iron!
Stainless steel in contact with Puro-Caustic solution for up to 1 hour
Dosage: 5 grams on 5 liters of hot-warm water
Let it soak in for 5-60 min. after that, rinse several times thoroughly with plenty of water.
Advantage pack of 5000 grams. Sufficient to produce 5000 liters of liquidVery favourable price-quality ratio, by far the most advantageous product in the European market!
Not Available
32 %
ECOLAB OxyDes Rapid 1000ml with atomizer
ATTENTION: This article is only in stock for professional use. PLEASE CONTACT CUSTOMER SUPPORT FOR YOUR ORDERS: Email: info@braumarkt.com / Tel: +31 (0)854839888OxyDes Rapid is a ready-to-use disinfectant based on hydrogen peroxide.
Excellent for intermediate disinfection in the food and food industry.
Spray undiluted product on the surface, spread with a clean cloth and allow to air dry.
Use enough liquid to keep the surface wet during the entire contact time.
Rinsing with water is not recommended.
Minimum exposure time: 5 minutes.
Important technical characteristics;
No biocide residues;
Quat and alcohol-free formulation;
Non-classified agent with low toxicity
Meets Kosher and Halal standards;
Excellent wetting agent;
Suitable for use on soft metals and sensitive polymers.
Registration number (NL) 15199N / (BE) 11616 B
€12.95* €18.95*
Available
Enzybrew 10 detergent bucket 10KG
€92.95*
ENZYBREW 10 breaks down the organic dirt that is left behind in the production of traditional beer, such as vegetable fibres, proteins and starch.
ENZYBREW 10 is a specific enzyme cocktail that guarantees a thorough cleaning that is safe for the materials and is ideal for cleaning filters, heat exchangers, yeast tanks, waiting bins and boilers.
Advantages
One cleaning cycle (saves time and water)
Non aggressive/non biting product so no risk of burns
Not harmful to the environment (>98% biodegradable)
Usage:
Dissolve 1% (10 g/L) in hot water (45-60 °C) and mix well.
Scrape or soak (or CIP) the material for 30 min.
Rinse with warm water
Developed and produced in Belgium!
few Available
Arsegan PURO SAN ® 2500 ML
€61.95*
Arsegan Puro San® is a strong foaming, acidic anionic final rinse for use in the food and beverage industry.Characteristics:Cleans tanks and equipment and avoids the build-up and build-up of minerals.Not affected by organic pollution.Required contact time only 60 seconds.Not suitable for soft metals and CIP systems.Dosage: 15 to 25 ml per 10 liters of water.Contents :2500 ml (for approximately 1600 liters of detergent).Refill bottle, ideal for refilling small bottles.Dutch operating manual.Instructions for use and precautions:Cover all food products thoroughly or remove them from the environment.Use as a final rinse.Before use, remove any debris or dirt by rinsing or sanding the surface and soaking if necessary.Then wash or rinse all parts thoroughly with a good cleaning agent and then again with clean water.For every 10 liters of solution, use 15 to 25 ml of Arsegan Puro San®, mix well with clean water.Apply the solution with a cloth, sponge or spray bottle (15-20 cm height), or soak the surface in the liquid.The surface must remain wet for at least 1 minute, then air-dry,Keep the container closed carefully and keep it in a well-ventilated place after use.Keep well sealed and always out of reach of children.Ingredients: phosphoric acid 50%, dodecyl-benzene sulfonic acid 5-15%Precautions:Arsegan Puro San® DO NOT MIX with chlorine-based cleaning agents because chlorine gas may be produced from them.Arsegan Puro San® affects undiluted metal with a contact time of more than 60 seconds.
Not Available
Craft Brew Upgrade - Cleaning Set
€9.50*
This Craft Brew Upgrade - Cleaning Set contains: 1 x Puro OXI 100 g.1 x Puro San 100 ml.1 x bottle brush with plume.
Not Available
ECOLAB OxyDes Rapid 5000ml
€62.95*
ATTENTION: This article is only in stock for professional use. PLEASE CONTACT CUSTOMER SUPPORT FOR YOUR ORDERS: Email: info@braumarkt.com / Tel: +31 (0)854839888OxyDes Rapid is a ready-to-use disinfectant based on hydrogen peroxide.
Excellent for intermediate disinfection in the food industry.
Spray undiluted product on the surface, spread with a clean cloth and allow to air dry.
Use enough liquid to keep the surface wet during the entire contact time.
Rinsing with water is not recommended.
Minimum exposure time: 5 minutes.
Important technical characteristics:
No biocide residues;
Quat and alcohol-free formulation;
Non-classified agent with low toxicity
Meets Kosher and Halal standards;
Excellent wetting agent;
Suitable for use on soft metals and sensitive polymers.
Registration number (NL) 15199N / (BE) 11616 B
few Available