Fermentation tanks

Bucket Semi-Transparent with Lid 5 litres

Semi-transparent bucket made from foodgrade HDPE. Lid Included. Volume 5 litres Complete with Handle Lid with guarantee closure Graduation Natural Colour / semi transparent Size: height 18,7 cm Ø 23,8 cm Important: Bucket is without spigot.

€5.95*

Bottle filler for tap Large

Bottle full? This bottel filler stops automatically when you remove the beer bottle.Fits on the drain valve for barrels of 30-60 liter and Braumarkt brew bucketsLength: 40 cmFills the liquid along the bottom so minimal oxidationDoes not fit on the valves of Speidel Barrels!

€4.45*

Spigot for Plastic Speidel Fermenters

Fits all plastic Speidel storage tanks/fermenters.

€6.45*

21 %

Oxebar PET Keg 4L with Cap and Handle

The 4L Oxebar Plastic Keg is a compact, lightweight, and reusable container perfect for storing your homebrew. With its smaller size, it’s ideal for camping, BBQs, or sharing drinks with friends. The keg features an advanced Oxebar Mono PET polymer blend, which provides superior oxygen barrier properties, keeping your beverage fresh for up to 6 months. This keg fits in most coolers and fridges and can even be dispensed while lying on its side. It comes with a PCO38 cap, but for draft dispensing, you can add the PCO38 Tapping Head (sold separately). Key Features: 4L capacity Superior oxygen barrier, preserves freshness Suitable for carbonated and non-carbonated drinks Diameter: 155mm, Height: 325mm Max pressure: 4 Bar / 58psi or 45°C Note: Periodic hydrotesting required every 2 years.

€5.95* €7.50*

Piece

Insulation Jacket for FB30 Fermenter

The Easybrew insulation jacket is a handy accessory for those cold winter days. It will help you to keep the temperature in your fermenter during colder days to prevent your fermentation from stalling.

€30.95*

18 %

Oxebar Monolayer Keg 8L With Cap and Handle

This compact and lightweight 8L reusable plastic keg is the perfect solution for storing homebrew in a smaller, more portable container than traditional 19L kegs. With its high oxygen barrier, it keeps beverages fresh 3 times longer, making it ideal for both carbonated and non-carbonated drinks. Key Features: Holds up to 8L of liquid 3x better gas barrier than standard PET plastic Capable of storing beer or other oxygen-sensitive drinks for up to 6 months Recommended maximum pressure: 4 Bar (58psi) or 45°C Includes PCO38 cap; optional PCO38 Tapping Head (KL20169) for draft dispensing (sold separately) Dimensions: Diameter: 155mm Height: 520mm Hydrotesting: Test every 2 years at 6 bar (simple instructions included). Perfect for sharing drinks with friends, and easy to maintain.

€8.95* €10.95*

Piece

Brew Bucket Semi Transparent 12 Litres incl. Lid

Brewing bucket semi transparent for pulp and main fermentation complete with: Lid Size distribution Handle Tap Airlock Connection for the water seal by means of a 100% silicone plug Especially suitable for foodstuffs. Ideal for pulp and main fermentation. Measurements: height 27.5 cm Ø 27.5 cm Content 12 Litres. Before use: Mount the tap in the bucket with the white ring on the outside. Hold the white part on the outside of the tap and carefully tighten the nut on the inside. Over tightening causes leakage. Place the bucket on the edge of the table and fill it with 5 Litres of water to test for leaks before use. The temperature of the liquid in the brewing bucket most never exceed 65 ° C. Prevent damage from scratching the plastic to prevent unwanted bacteria. Brew buckets are ideally suited for the 1st or main fermentation because there is sufficient CO2 above the liquid. Always use a fermentation vessel with rubber ring for 100% sealing, or a glass bottle with stopper and airlock.

€10.95*

Insulation Jacket for FB60 Fermenter

€38.95*

Brewing Bucket Semi-Transparent Complete - 5 litres

Semi-transparent bucket made from foodgrade HDPE. Contains of a lid (with pre-drilled hole), volume indicator, handle, spigot, airlock and silicone plug for airlock. Perfect as fermenter or bottling bucket. Volume: 5 litresWidth with lid : 23,8 cm Height with lid : 18,7cm Diameter : 23,8 cm Important: Mount the rubber ring of the spigot on the outside of the bucket. Tighten the nut on the inside carefully. Overtightening can cause leakage!

€8.95*

Oxebar Monolayer Keg 8L incl. Tapping hat kit

Oxebar 8L Keg Bundle – Monolayer Keg with Cap & Handle + Tapping Head Kit This convenient bundle includes everything you need for your kegging setup: Oxebar 8L Monolayer Keg with a sturdy cap and handle for easy transport Tapping Head Kit designed for Oxebar kegs (PCO38) for easy dispensing Perfect for homebrewers, this kit makes kegging simple, efficient, and ready to use.

€23.95*

Oxebar PET Keg 4L incl. Tapping hat kit

Oxebar 4L PET Keg Bundle – Keg with Cap & Handle + Tapping Head Kit (PCO38) This convenient bundle includes everything you need for your smaller keg system: Oxebar 4L PET Keg with cap and handle for easy transport Tapping Head Kit designed specifically for Oxebar Kegs (PCO38) for quick and easy tapping Perfect for smaller batches – everything you need to get started with kegging!

€19.95*

Easybrew Chillercoil for 30L bucket

The Easybrew Chillercoil is one of those tools that can help you brew better beers. The Chillercoil allows you to control the fermentation temperature of your wort. Specifications: Material: 304 stainless steel Coil Length: 4.7m. Hole for airlock.

€76.45*

19 %

FermZilla - Tri-Conical - 27L - Starter Kit with handle (Gen 3)

The Gen3 FermZilla 27L Tri-Conical is an advanced fermentation vessel perfect for homebrewers and small breweries. Featuring a 3-inch Tri-Clover ferrule, a 600mL collection container, and an easy-to-clean design, it offers a simple, sanitary solution for fermenting under pressure (up to 2.4 bar). This new model is designed for ease of use and maintenance, with a clear view of the fermentation process. Key Features: 3-inch Tri-Clover ferrule and butterfly valve for easy cleaning 600mL collection container with Tri-Clover connection Ferments under pressure up to 2.4 bar Transparent design for monitoring fermentation Starter Kit Includes: 27L Tri-Conical tank with metal neck ring Standard top lid with PRV (35psi) 600mL collection container & lid, Tri-Clover clamps, and more The Gen3 FermZilla is easier to clean, disassemble, and is ideal for brewers at all levels. Dimensions:Height - 750 mm Height with airlock - 856 mm Width - 388 mm Circumference - 352 mm

€119.95* €147.95*

Piece

18 %

Oxebar 20L Amber PET Keg & Pressure Fermenter Tank

This 20L Oxebar Amber PET Keg fits up to 3 in Series X.1, X, or 4.1 (XL), and up to 6 in the Series X.1 Plus. It protects your beer from light damage with its amber tint and extends freshness up to 3 times longer, thanks to the Mono Barrier PET Polymer Matrix. Key Features: Floating dip tube with cage filter for easy stacking and disconnection. Pressure Relief Valve (65psi) to ensure safe pressure release. Dimensions: 640mm high, 235mm diameter. Capacity: 19.5L for kegging, or 15-18L for fermenting (requires a spunding valve like the BlowTie). Uses: Overflow homebrew keg Commercial keg cleaning Temporary pressure fermenter (for small batches) Includes: 20L Amber Mono Barrier PET Keg Dual PCO1881 Lid with Black Handle Green Pressure Relief Valve (65psi) Silicone Hosing with Stainless Steel Float & Hop Filter Multi-Gas and Multi-Liquid Plastic Carbonation Caps

€32.95* €39.95*

Piece

14 %

Apollo 30l Unitank Pressure Fermenter

The Apollo 30 L Unitank Pressure Fermenter takes brewing to new heights. This is the perfect fermenter to get into pressure fermentation, allowing you to ferment and carbonate in one vessel, meaning you get to drink your beer sooner. With its conical shape, and clear, high-strength PET build, the Apollo allows you to ferment quality beer, under pressure, with confidence. Specifications: Stainless steel plunge valve and collection bottle for dumping trub and harvesting yeast A dry hop port for sanitary dry hopping Multi pressure option PRV selection - select the pressure setting from the 3 x PRVs included Centralised floating dip tube for clear transfers Thermowell to monitor the internal temperature Built in handles True conical shape Stainless steel stand When finished, the beer can be served directly from the fermenter, or transferred to a keg without introducing oxygen. Each unit is pressure tested straight off the production line.

€159.95* €184.95*

Brewing Bucket Semi-Transparent Complete - 25 litres

'Semi-transparent bucket made from foodgrade HDPE. Contains of a lid (with pre-drilled hole), volume indicator, handle, spigot, airlock and silicone plug for airlock. Perfect as fermenter or bottling bucket. Volume: 25 litresWidth with lid : 38cm Height with lid : 36cm Diameter : 38 cm Important: Mount the rubber ring of the spigot on the outside of the bucket. Tighten the nut on the inside carefully. Overtightening can cause leakage!

€11.95*

Speidel Plastic Fermenter 20 litres with Spigot and Airlock

Plastic fermenter made from high quality white foodgrade HDPE (High Density Polyethylene) which is acid and alcohol resistant. Has a large top opening for easy cleaning and comes with spigot, rubber stopper and cylindrical airlock. Capacity: 20 litres Size: Diameter 310mm, Height 418mm

€46.45*

18 %

FermZilla - Tri-Conical - 55L - Starter Kit with handle Gen3

The Gen3 FermZilla Tri-Conical is a game-changer for homebrewers, featuring a 3-inch Tri-Clover ferrule, a 600mL collection container, and easy-to-use Tri-Clover connections. Designed based on customer feedback, it offers simpler, more sanitary design and effortless disassembly.Key Features:3-inch Tri-Clover ferrule and butterfly valve for easy cleaning600mL collection container with Tri-Clover connectionFerment under pressure up to 2.4 barTransparent design to monitor fermentationStarter Kit Includes:55L Tri-Conical tank with metal neck ring Standard top lid with PRV (35psi) and accessory ports 600mL collection container & lid, Tri-Clover clamps, and more The new Gen3 model is easier to clean and assemble than its predecessor, making it perfect for brewers at all levels.Dimensions:Height - 1055 mmHeight with airlock - 1146 mm Width - 388 mmCircumference - 354 mm

€139.95* €169.95*

Piece

Speidel 3/4" Stainless Steel Ball Valve for FD Tanks

Speidel 3/4 "stainless steel ball valve for FD tanks. Male connector - Female connector 3/4 ", V2

€86.45*

21 %

Apollo 30l Snub Nose

The Apollo 30 L Snub Nose Pressure Fermenter takes brewing to new heights. This is the perfect fermenter to get into pressure fermentation, allowing you to ferment and carbonate in one vessel, meaning you get to drink your beer sooner. With its conical shape, and clear, high-strength PET build, the Apollo allows you to ferment quality beer, under pressure, with confidence. Specifications: A dry hop port for sanitary dry hopping Multi pressure option PRV selection - select the pressure setting from the 3 x PRVs included Centralised floating dip tube for clear transfers Thermowell to monitor the internal temperature Built in handles True conical shape Stainless steel stand When finished, the beer can be served directly from the fermenter, or transferred to a keg without introducing oxygen. Each unit is pressure tested straight off the production line.

€119.95* €152.45*

Grainfather conical fermenter cooling pump kit

Temperature control is one of the most crucial elements for producing a beer of good quality. It must be regulated throughout the fermentation process and be stable to ensure that the yeast does not get stressed and ferment in the right way to get the right flavor profile. To cool off with the Grainfather Conical Fermenter, you must have the Conical Fermenter Temperature Controller. As soon as your target temperature is lower than the temperature of the wort in your digester, the cooling pump set pumps ice-cold water through the double-walled, insulated interior to cool your wort. Simply connect the couplings and insulated hoses to the Conical Fermenter, immerse the submersible pump in a cool box with water (add ice for the desired temperature) and pump the liquid through the insulated cooling of the Conical Fermenter housing.

€87.45*

Speidel 1" Stainless Steel Ball Valve for Ferment-Egg

Speidel 1"stainless steel ball valve for Ferment EggMale connector - Female connector 1 ", V2 For the FermentEgg 2 spigots are necessary.

€87.45*

Tip

Easybrew Fermenting Bucket 60L with Dry-Hop Lid

Conical stainless steel 60 liters fermenter, ideal for brews up to about 50 liters equipped with dry-hop opening in the lid. The conical bottom creates a concentrated yeast deposit that allows you to easily drain clear beer through the tap in the cone. As the lid, just as with a brewing bucket, covers the entire width, this fermenter is super easy to clean. This fermentation vessel comes with a convenient feed hole for dry-hopping. Caution: do not lift the fermenter when full. Features Volume: 60 l Stainless steel lid with silicone seal and cylindrical airlock Matt stainless steel finish (AISI 304) Equipped with conical bottom 3 legs 2 stainless steel handles Thermometer 0-40°C included 3/8" ball valve in the cone Total outlet with 3/4" tap on the bottom Convenient inlet with 2" tri-clamp coupling. Volume markings on the inside (in liters /gal) Dimensions: Height 70 cm, diameter 47 cm.

€325.45*

FastFerment™ stand extension kit

These Leg Extensions allow you to extend the Stand for the 14G FastFerment™. This way a Keg can be fitted under the FastFerment™ for easy filling.50,8 cm in length12 mm Diameter Legs and 14 mm diameter RingWorks for 14G (53L) versionsHeight from Ground to Airlock - 156.7 cm Height from Ground to Top of Lid - 147.8 cmTotal Clearance from Valve to Ground for Kegging 66 cm

€40.95*