Fermentation tanks
Bucket Semi-Transparent with Lid 5 litres
€5.95*
Semi-transparent bucket made from foodgrade HDPE. Lid Included.
Volume 5 litres
Complete with Handle
Lid with guarantee closure
Graduation
Natural Colour / semi transparent
Size: height 18,7 cm Ø 23,8 cm
Important: Bucket is without spigot.
Bottle filler for tap Large
€4.45*
Bottle full? This bottel filler stops automatically when you remove the beer bottle.Fits on the drain valve for barrels of 30-60 liter and Braumarkt brew bucketsLength: 40 cmFills the liquid along the bottom so minimal oxidationDoes not fit on the valves of Speidel Barrels!
Oxebar PET Keg 4L with Cap and Handle
€7.50*
The 4L Oxebar Plastic Keg is a compact, lightweight, and reusable container perfect for storing your homebrew. With its smaller size, it’s ideal for camping, BBQs, or sharing drinks with friends. The keg features an advanced Oxebar Mono PET polymer blend, which provides superior oxygen barrier properties, keeping your beverage fresh for up to 6 months.
This keg fits in most coolers and fridges and can even be dispensed while lying on its side. It comes with a PCO38 cap, but for draft dispensing, you can add the PCO38 Tapping Head (sold separately).
Key Features:
4L capacity
Superior oxygen barrier, preserves freshness
Suitable for carbonated and non-carbonated drinks
Diameter: 155mm, Height: 325mm
Max pressure: 4 Bar / 58psi or 45°C
Note: Periodic hydrotesting required every 2 years.
Insulation Jacket for FB30 Fermenter
€30.95*
The Easybrew insulation jacket is a handy accessory for those cold winter days. It will help you to keep the temperature in your fermenter during colder days to prevent your fermentation from stalling.
Brew Bucket Semi Transparent 12 Litres incl. Lid
€10.95*
Brewing bucket semi transparent for pulp and main fermentation complete with:
Lid
Size distribution
Handle
Tap
Airlock
Connection for the water seal by means of a 100% silicone plug
Especially suitable for foodstuffs.
Ideal for pulp and main fermentation.
Measurements: height 27.5 cm Ø 27.5 cm
Content 12 Litres.
Before use:
Mount the tap in the bucket with the white ring on the outside. Hold the white part on the outside of the tap and carefully tighten the nut on the inside. Over tightening causes leakage.
Place the bucket on the edge of the table and fill it with 5 Litres of water to test for leaks before use.
The temperature of the liquid in the brewing bucket most never exceed 65 ° C.
Prevent damage from scratching the plastic to prevent unwanted bacteria.
Brew buckets are ideally suited for the 1st or main fermentation because there is sufficient CO2 above the liquid.
Always use a fermentation vessel with rubber ring for 100% sealing, or a glass bottle with stopper and airlock.
Brewing Bucket Semi-Transparent Complete - 25 litres
€11.95*
'Semi-transparent bucket made from foodgrade HDPE. Contains of a lid (with pre-drilled hole), volume indicator, handle, spigot, airlock and silicone plug for airlock.
Perfect as fermenter or bottling bucket.
Volume: 25 litresWidth with lid : 38cm
Height with lid : 36cm
Diameter : 38 cm
Important: Mount the rubber ring of the spigot on the outside of the bucket. Tighten the nut on the inside carefully. Overtightening can cause leakage!
Brewing Bucket Semi-Transparent Complete - 5 litres
€8.95*
Semi-transparent bucket made from foodgrade HDPE. Contains of a lid (with pre-drilled hole), volume indicator, handle, spigot, airlock and silicone plug for airlock.
Perfect as fermenter or bottling bucket.
Volume: 5 litresWidth with lid : 23,8 cm
Height with lid : 18,7cm
Diameter : 23,8 cm
Important: Mount the rubber ring of the spigot on the outside of the bucket. Tighten the nut on the inside carefully. Overtightening can cause leakage!
Oxebar Monolayer Keg 8L With Cap and Handle
€10.95*
This compact and lightweight 8L reusable plastic keg is the perfect solution for storing homebrew in a smaller, more portable container than traditional 19L kegs. With its high oxygen barrier, it keeps beverages fresh 3 times longer, making it ideal for both carbonated and non-carbonated drinks.
Key Features:
Holds up to 8L of liquid
3x better gas barrier than standard PET plastic
Capable of storing beer or other oxygen-sensitive drinks for up to 6 months
Recommended maximum pressure: 4 Bar (58psi) or 45°C
Includes PCO38 cap; optional PCO38 Tapping Head (KL20169) for draft dispensing (sold separately)
Dimensions:
Diameter: 155mm
Height: 520mm
Hydrotesting:
Test every 2 years at 6 bar (simple instructions included).
Perfect for sharing drinks with friends, and easy to maintain.
Plastic Fermenter 31 litres with Spigot and Airlock
€28.45*
Sturdy plastic fermenter of 31 litres made of foodgrade HDPE. With airtight screw cap, spigot, big airlock and additional screw cap (to replace the airlock). Easy to carry (even full) thanks to the integrated handles. The big opening makes is very easy to clean.
Because of the limited height this fermenter fits easily in any normal fridge.
Volume: 31 litres
Diameter: 40 cm
Height: 36 cm without airlock, 48 cm with airlock
Comes with spigot, big airlock and screw cap (to replace the airlock)
Insulation Jacket for FB60 Fermenter
€38.95*
The Easybrew insulation jacket is a handy accessory for those cold winter days. It will help you to keep the temperature in your fermenter during colder days to prevent your fermentation from stalling.
Oxebar 20L Amber PET Keg & Pressure Fermenter Tank
€39.90*
This 20L Oxebar Amber PET Keg fits up to 3 in Series X.1, X, or 4.1 (XL), and up to 6 in the Series X.1 Plus. It protects your beer from light damage with its amber tint and extends freshness up to 3 times longer, thanks to the Mono Barrier PET Polymer Matrix.
Key Features:
Floating dip tube with cage filter for easy stacking and disconnection.
Pressure Relief Valve (65psi) to ensure safe pressure release.
Dimensions: 640mm high, 235mm diameter.
Capacity: 19.5L for kegging, or 15-18L for fermenting (requires a spunding valve like the BlowTie).
Uses:
Overflow homebrew keg
Commercial keg cleaning
Temporary pressure fermenter (for small batches)
Includes:
20L Amber Mono Barrier PET Keg
Dual PCO1881 Lid with Black Handle
Green Pressure Relief Valve (65psi)
Silicone Hosing with Stainless Steel Float & Hop Filter
Multi-Gas and Multi-Liquid Plastic Carbonation Caps
Easybrew Chillercoil for 30L bucket
€76.45*
The Easybrew Chillercoil is one of those tools that can help you brew better beers.
The Chillercoil allows you to control the fermentation temperature of your wort.
Specifications:
Material: 304 stainless steel
Coil Length: 4.7m.
Hole for airlock.
FermZilla - Tri-Conical - 27L - Starter Kit with handle (Gen 3)
€147.95*
The Gen3 FermZilla 27L Tri-Conical is an advanced fermentation vessel perfect for homebrewers and small breweries. Featuring a 3-inch Tri-Clover ferrule, a 600mL collection container, and an easy-to-clean design, it offers a simple, sanitary solution for fermenting under pressure (up to 2.4 bar). This new model is designed for ease of use and maintenance, with a clear view of the fermentation process.
Key Features:
3-inch Tri-Clover ferrule and butterfly valve for easy cleaning
600mL collection container with Tri-Clover connection
Ferments under pressure up to 2.4 bar
Transparent design for monitoring fermentation
Starter Kit Includes:
27L Tri-Conical tank with metal neck ring
Standard top lid with PRV (35psi)
600mL collection container & lid, Tri-Clover clamps, and more
The Gen3 FermZilla is easier to clean, disassemble, and is ideal for brewers at all levels.Dimensions:Height - 750 mm Height with airlock - 856 mm Width - 388 mm Circumference - 352 mm
Apollo 30l Unitank Pressure Fermenter
€184.95*
The Apollo 30 L Unitank Pressure Fermenter takes brewing to new heights. This is the perfect fermenter to get into pressure fermentation, allowing you to ferment and carbonate in one vessel, meaning you get to drink your beer sooner.
With its conical shape, and clear, high-strength PET build, the Apollo allows you to ferment quality beer, under pressure, with confidence.
Specifications:
Stainless steel plunge valve and collection bottle for dumping trub and harvesting yeast
A dry hop port for sanitary dry hopping
Multi pressure option PRV selection - select the pressure setting from the 3 x PRVs included
Centralised floating dip tube for clear transfers
Thermowell to monitor the internal temperature
Built in handles
True conical shape
Stainless steel stand
When finished, the beer can be served directly from the fermenter, or transferred to a keg without introducing oxygen. Each unit is pressure tested straight off the production line.
FermZilla - Tri-Conical - 55L - Starter Kit with handle Gen3
€179.00*
The Gen3 FermZilla Tri-Conical is a game-changer for homebrewers, featuring a 3-inch Tri-Clover ferrule, a 600mL collection container, and easy-to-use Tri-Clover connections. Designed based on customer feedback, it offers simpler, more sanitary design and effortless disassembly.Key Features:3-inch Tri-Clover ferrule and butterfly valve for easy cleaning600mL collection container with Tri-Clover connectionFerment under pressure up to 2.4 barTransparent design to monitor fermentationStarter Kit Includes:55L Tri-Conical tank with metal neck ring Standard top lid with PRV (35psi) and accessory ports 600mL collection container & lid, Tri-Clover clamps, and more The new Gen3 model is easier to clean and assemble than its predecessor, making it perfect for brewers at all levels.Dimensions:Height - 1055 mmHeight with airlock - 1146 mm Width - 388 mmCircumference - 354 mm
Speidel Plastic Fermenter 20 litres with Spigot and Airlock
€46.45*
Plastic fermenter made from high quality white foodgrade HDPE (High Density Polyethylene) which is acid and alcohol resistant. Has a large top opening for easy cleaning and comes with spigot, rubber stopper and cylindrical airlock.
Capacity: 20 litres
Size: Diameter 310mm, Height 418mm
Speidel 3/4" Stainless Steel Ball Valve for FD Tanks
€86.45*
Speidel 3/4 "stainless steel ball valve for FD tanks.
Male connector - Female connector 3/4 ", V2
Apollo 30l Snub Nose
€152.45*
The Apollo 30 L Snub Nose Pressure Fermenter takes brewing to new heights. This is the perfect fermenter to get into pressure fermentation, allowing you to ferment and carbonate in one vessel, meaning you get to drink your beer sooner.
With its conical shape, and clear, high-strength PET build, the Apollo allows you to ferment quality beer, under pressure, with confidence.
Specifications:
A dry hop port for sanitary dry hopping
Multi pressure option PRV selection - select the pressure setting from the 3 x PRVs included
Centralised floating dip tube for clear transfers
Thermowell to monitor the internal temperature
Built in handles
True conical shape
Stainless steel stand
When finished, the beer can be served directly from the fermenter, or transferred to a keg without introducing oxygen. Each unit is pressure tested straight off the production line.
Tip
Easybrew Fermenting Bucket 60L with Dry-Hop Lid
€325.45*
Conical stainless steel 60 liters fermenter, ideal for brews up to about 50 liters equipped with dry-hop opening in the lid.
The conical bottom creates a concentrated yeast deposit that allows you to easily drain clear beer through the tap in the cone.
As the lid, just as with a brewing bucket, covers the entire width, this fermenter is super easy to clean. This fermentation vessel comes with a convenient feed hole for dry-hopping. Caution: do not lift the fermenter when full.
Features
Volume: 60 l
Stainless steel lid with silicone seal and cylindrical airlock
Matt stainless steel finish (AISI 304)
Equipped with conical bottom
3 legs
2 stainless steel handles
Thermometer 0-40°C included
3/8" ball valve in the cone
Total outlet with 3/4" tap on the bottom
Convenient inlet with 2" tri-clamp coupling.
Volume markings on the inside (in liters /gal)
Dimensions: Height 70 cm, diameter 47 cm.
Grainfather conical fermenter cooling pump kit
€87.45*
Temperature control is one of the most crucial elements for producing a beer of good quality. It must be regulated throughout the fermentation process and be stable to ensure that the yeast does not get stressed and ferment in the right way to get the right flavor profile.
To cool off with the Grainfather Conical Fermenter, you must have the Conical Fermenter Temperature Controller. As soon as your target temperature is lower than the temperature of the wort in your digester, the cooling pump set pumps ice-cold water through the double-walled, insulated interior to cool your wort.
Simply connect the couplings and insulated hoses to the Conical Fermenter, immerse the submersible pump in a cool box with water (add ice for the desired temperature) and pump the liquid through the insulated cooling of the Conical Fermenter housing.
Speidel 1" Stainless Steel Ball Valve for Ferment-Egg
€87.45*
Speidel 1"stainless steel ball valve for Ferment EggMale connector - Female connector 1 ", V2
For the FermentEgg 2 spigots are necessary.
FastFerment™ stand extension kit
€40.95*
These Leg Extensions allow you to extend the Stand for the 14G FastFerment™. This way a Keg can be fitted under the FastFerment™ for easy filling.50,8 cm in length12 mm Diameter Legs and 14 mm diameter RingWorks for 14G (53L) versionsHeight from Ground to Airlock - 156.7 cm Height from Ground to Top of Lid - 147.8 cmTotal Clearance from Valve to Ground for Kegging 66 cm
Plastic Fermenter 60 litres with Spigot and Airlock
€37.45*
Sturdy plastic fermenter of 60 litres made of foodgrade HDPE. With airtight screw cap, spigot, big airlock and additional screw cap (to replace the airlock). Easy to carry (even full) thanks to the integrated handles. The big opening makes is very easy to clean.
Volume: 60 litres
Diameter: 40 cm
Height: 61 cm without airlock, 73 cm with airlock
Comes with spigot, big airlock and screw cap (to replace the airlock)