Cylindrical airlock for barrels from 10 L up to 60 L. Cylindrical airlocks are easier to clean than classic twin-bubble models and don't dry up as fast.
For barrels from 10 L up to 60 L
Dimensions (Ø x H): 3,5 cm x 6 cm
Suitable for an opening of 9 mm
Fill the airlock with a little water or disinfection solution so it acts as a siphon; the beer is closed of from the outside air by the water, hence preventing bacteria to enter. However the carbon dioxide formed during fermentation can escape.
The water in the airlock evaporates, so regularly checking and refilling is necessary!
A silicone plug for airlocks.Flavourless and odourlessIdeal for placing an airlock in plastic barrels, buckets or jerry cansFits in a 16 mm holeFood safe
Cylindrical airlock for barrels up to 20 L. Cylindrical airlocks are easier to clean than classic twin-bubble models and don't dry up as fast.
For barrels up to 20 L
Dimensions (Ø x H): 1 cm x 7 cm
Suitable for an opening of 9 mm
Fill the airlock with a little water or disinfection solution so it acts as a siphon; the beer is closed of from the outside air by the water, hence preventing bacteria to enter. However the carbon dioxide formed during fermentation can escape.
The water in the airlock evaporates, so regularly checking and refilling is necessary!
Classic airlock for barrels from 1 L up to 50 L. Classic twin-bubble models are cheaper, but more difficult to clean than cylindrical airlocks.
For barrels from 1 L up to 50 L
Dimensions (Ø x H): 1 cm x 16 cm
Suitable for an opening of 9 mm
Fill the airlock with a little water or disinfection solution so it acts as a siphon; the beer is closed of from the outside air by the water, hence preventing bacteria to enter. However the carbon dioxide formed during fermentation can escape.
The water in the airlock evaporates, so regularly checking and refilling is necessary!
Volume 5 litres
Material: Glass
Colour: White/transparent
Neck opening: 28/29mm
Size: height 35 cm Ø 17 cm
Closure: rubber cap n°4, silicone or rubber stopper, 26x32 mm, with or without hole, of air lock. (cap or stopper and air lock are not included)
Note:
Never use boiling water to clean the bottle. This may break the glass.
Clean the bottle with warm water, a bottle brush and a Puro-Oxi or sulphite solution.Do not lift a filled bottle by the earpiece or neck but use the handles of the included basket (if it is part of the product) and support the bottom by hand.Depending on the supplier's deliveries, you might receive a round or a straight handle, unfortunately it is not possible to make a choice.
Airlock for barrels from 1 L up to 50 L.
For barrels from 1 L up to 50 L
Dimensions (Ø x H): 1 cm x 16 cm
Suitable for an opening of 9 mm
Fill the airlock with a little water or disinfection solution so it acts as a siphon; the beer is closed of from the outside air by the water, hence preventing bacteria to enter. However the carbon dioxide formed during fermentation can escape.
The water in the airlock evaporates, so regularly checking and refilling is necessary!
Bottle full? This bottel filler stops automatically when you remove the beer bottle.
Fits on the drain valve for barrels of 30-60 liter and Braumarkt brew buckets
Length: 34 cm
Fills the liquid along the bottom so minimal oxidation
Does not fit on the valves of Speidel Barrels!
Volume 5 litres
Material: Glass
Colour: White/transparent
Neck opening: 28/29mm
Size: height 35 cm Ø 17 cm
Note:
Never use boiling water to clean the bottle. This may break the glass.
Clean the bottle with warm water, a bottle brush and a Puro-Oxi or sulphite solution.Do not lift a filled bottle by the earpiece or neck but use the handles of the included basket (if it is part of the product) and support the bottom by hand.Depending on the supplier's deliveries, you might receive a round or a straight handle, unfortunately it is not possible to make a choice.
Semi-transparent bucket made from foodgrade HDPE. Lid Included.
Volume 5 litres
Complete with Handle
Lid with guarantee closure
Graduation
Natural Colour / semi transparent
Size: height 18,7 cm Ø 23,8 cm
Important: Bucket is without spigot.
Bottle full? This bottel filler stops automatically when you remove the beer bottle.Fits on the drain valve for barrels of 30-60 liter and Braumarkt brew bucketsLength: 40 cmFills the liquid along the bottom so minimal oxidationDoes not fit on the valves of Speidel Barrels!
The egg of Columbus. The bottel filler stops automatically when you remove the beer bottle.
Fits the drain valve for barrels of 30-60 ltr. and on the buckets of Brouwmarkt.
Length: 22 cm
Fills the liquid along the bottom with minimal oxidation
Self adhesive thermometer, works with liquid crystals that continuously check the temperature of your barrel or bottle.
Ideal for checking the fermentation temperature of your fermentation vessels.
Indispensable for every wine maker and brewer!
Simply stick on.
No batteries required!
Wide temperature range: 10-40°C
No risk of glass breakage
Cylindrical airlock for barrels from 30 L up to 210 L. Does fit our 31 L and 60 L fermenters and all Speidel/Graf-type fermenters.
Cylindrical airlocks are easier to clean than classic twin-bubble models and don't dry up as fast.
For barrels from 30 L up to 210 L
Afmetingen (Ø x H): 8 cm x 11 cm
Geschikt voor een opening van 17 mm
Fill the airlock with a little water or disinfection solution so it acts as a siphon; the beer is closed of from the outside air by the water, hence preventing bacteria to enter. However the carbon dioxide formed during fermentation can escape.
The water in the airlock evaporates, so regularly checking and refilling is necessary!
Silicone stopper without holeSize: 47 x 55 mm (bottom diameter x top diameter)Material: high quality nutritionally suitable siliconeResistant to high temperaturesAbsolutely tasteless and odourlessVery suitable for closing bottles, wooden barrels, tanks or for laboratory use.
The 4L Oxebar Plastic Keg is a compact, lightweight, and reusable container perfect for storing your homebrew. With its smaller size, it’s ideal for camping, BBQs, or sharing drinks with friends. The keg features an advanced Oxebar Mono PET polymer blend, which provides superior oxygen barrier properties, keeping your beverage fresh for up to 6 months.
This keg fits in most coolers and fridges and can even be dispensed while lying on its side. It comes with a PCO38 cap, but for draft dispensing, you can add the PCO38 Tapping Head (sold separately).
Key Features:
4L capacity
Superior oxygen barrier, preserves freshness
Suitable for carbonated and non-carbonated drinks
Diameter: 155mm, Height: 325mm
Max pressure: 4 Bar / 58psi or 45°C
Note: Periodic hydrotesting required every 2 years.
The Easybrew insulation jacket is a handy accessory for those cold winter days. It will help you to keep the temperature in your fermenter during colder days to prevent your fermentation from stalling.
€30.95*
This website uses cookies to ensure the best experience possible. More information...