Others

Monofilament Filterbeutel 150µ - Größe 4 (2,5 Liter)

Filter bag 150µm

Filter bag, 150 µm - with sewed PE-RingWashable and reusable. Temperature stability up to 100°C. Technical Data: Length: 380 mm Diameter: 100 mm Nominal mesh size: 150 µm Material:Nylon Weight: 2,5 Liter

€7.95*

Monofilament Filter bag 150µm No. 3 (1,5l)

Filter bag, 150 µm - with sewed PE-RingWashable and reusable. Temperature stability up to 100°C. Technical Data: Length: 230 mm Diameter: 100 mm Nominal mesh size: 150 µm Material: Nylon Weight: 1,5 Liter

€6.95*

Monofilament Filter Bag 150 µm nr.1 (8 l)

Monofilament Filter Bag 150 µm – with stitched-in PE plastic collar Washable and reusable for homebrewing applications. Heat resistant up to 100 °C. Specifications: Length: 420 mm Diameter: 180 mm Nominal mesh size: 150 µm Filter area: 0.25 m² Volume: 8.0 litres Material: Nylon

€9.95*

Piece

Hopfilter Bazooka RVS 15 cm 1/2" Male NPT

€10.45*

$Refractometer 0-32% BRIX | 1.000-1.120 SG ATC$

Refractometer 0-32% BRIX | 1.000-1.120 SG ATC

A refractometer is an easy way to measure the density of your wort during brew day. Simply place a few drops of wort on the glass, close the cover, point the refractometer to a light source and make the reading. Scales: 0 % to 32 % Brix with a 0.2 % division 1.000 to 1.120 SG with a 0.001 division ATC (Automatic Temperature Compensation) range: 10 °C to 30 °CRecommended for brewers.

€38.95*

Bazooka Hop Screen Stainless Steel - 30 cm

Stainless steel bazooka hop screens can be used for lautering in a mash tun or as a hop strainer in a boil kettle. Comes with a 1/2" male threaded end to fit to your kettles ball valve/spigot. Available in both 15 and 30 cm. Thread: 1/2" NPT Length: 30 cm

€12.95*

Monofilament Filter bag 150 µm No.2 (17,5 l)

Monofilament Filter Bag 150 µm – with stitched-in PE plastic collar Washable and reusable for homebrewing applications. Heat resistant up to 100 °C. Specifications: Length: 820 mm Diameter: 180 mm Nominal mesh size: 150 µm Filter area: 0.50 m² Volume: 17.5 litres Material: Nylon

€12.95*

Piece

Inkbird ITC-308 wifi Temperatuurregelaar EU

Inkbird ITC-308 wifi Temperature Controller EU

The Inkbird ITC-308S is a pre-build outlet thermostat/temperature controller: simply plug in, set the temperature and you're done! With WIFI controller + fee App "InkbirdSmart" (IOS and Android), allows you to monitor and control the temperature everywhere. Features:CE certified!EU plug/sockets!Large and clear LCD displays with target temperature and actual temperatureDual heating and cooling functionAutomatic over-temperature and sensor fault alarmTemperature calibrationCompressor delay protection for refrigeration controlWith WIFI controller + free App "InkbirdSmart" (for IOS and Android), allows you to monitor en control the temperature everywhere. Specifications:Control temperature range: -40 ~ 100°C (°C/°F vadjustable)Resolution: 0.1 °CAccuracy: ± 1 °C (-50 ~ 70 °C)Relay contact capacity (Heating): 10 A (max) 240 VRelay contact capacity (Cooling): 10 A (max) 240 VSensor cable length: 2 mPower cable length: 1.5 mOutlets cable length: 30 cmSize: Body: 140 x 68 x 33 mm / Socket: 135 x 54 x 40 mmWeight: 350 g

€60.45*

1.5" TC Inline Sight Glass

304 Stainless Steel 1.5" Tc-clamp connection on both sides. Easy to disassemble for careful cleaning. Max. pressure 120 PSI (8 bar) Throttle opening 51mm Length 190mm

€49.12*

Spuitflacon plastic rode druppeldop 150 ml

Spray Bottle Plastic with Drop Cap 150 ml

€2.95*

Tri Clamp, 34mm

Tri Clamp for connecting TC34mm fittings. Gaskets not included.

€9.45*

Brewtools Staafadapter, 3/8” NPT naar 10mm

Brewtools Barb adapter, 3/8" NPT to 10mm

Barb adapter, 3/8" NPT to 10mm PP, semi-transparent

€2.95*

Spuitflacon plastic rode druppeldop 80 ml

Spray Bottle Plastic with Drop Cap 80 ml

€2.45*

Hop Tube Rvs 30cm

€21.45*

TC Gasket, 34mm, DN20, 5 pack

5 TC-gaskets for use between TC 34mm fittingsDN20 is used where the inner dimensions of the fittings exceeds 16mm Made from food grade silicone

€7.43*

Grainfather Overflow Filter

Prevents particles from moving down the overflow pipe. For use with Grainfather Brewing Systems. Fits between the overflow inlet and the top mash plate. Specifications: Material: 304 stainless steel Mesh: 600 micron mesh Centre hole: 23 mm (0.9")

€25.95*

Ball Lock Adapter, Gas, TC34mm M16 met binnendraad

Ball Lock Adapter, Gas, TC34mm M16 inside thread

€24.45*

20%

Grainfather GC2 Glycol Chiller met Glycol & Cooling connection kit

Grainfather GC2 Glycol Chiller with Glycol & Cooling connection kit

Control and power up to two fermenters at different temperatures and fermentation schedules with the GC2. By accurately controlling the temperature of your fermentation, you can produce consistent beers, every time. The Chiller will be shipped with Glycol and one Cooling connection kit. Features: Control and power up to two fermenters at different temperatures and fermenting schedules. Use with the GCA Glycol Chiller Adapter to connect to the Grainfather S SERIES range of fermenters or most other fermenters. Sleek and compact design with LED control display Compatible with the Grainfather App when connected to a Grainfather G SERIES fermenter or the GCA for managing your fermentation from anywhere via Wi-Fi Backed by a 3-year warranty Dimensions: 583 x 320 x 363mm 19.5kg 3L Glycol tank Package content: GC2 Glycol Chiller Propylene glycol* 1 x Cooling connect kit Glycol funnel Silicone tubing for priming pump

€688.76* €860.95*

TC Gasket, 1.5", 5 pack

TC-gaskets for use between TC 1.5" fittings Made from foodgrade silicone.

€11.45*

TC34mm to 10mm hose barb

TC34mm to 10mm hose barb.

€17.95*

Brewtools Haakse bocht, 90°, 3/8” NPT naar 10mm

Brewtools Barb elbow, 90°, 3/8" NPT to 10mm

Barb elbow, 90°, 3/8" NPT to 10mm PP, semi-transparent

€2.95*

Quick connector, F to 10mm barb (panel)

Quick Connectors for Glycol Cooling – Perfect for Fermenters These high-quality quick connectors are ideal for glycol-based fermenter cooling systems. They ensure a secure, leak-proof connection and allow for fast assembly and disassembly of your cooling setup. Compatibility: Fits 8.5 x 14 mm EVA tubing – both insulated and non-insulated Hole Size: 18 mm Application: Suitable for use with fermenters, cooling tanks, or other brewing applications Perfect for homebrewers, nano breweries, or professional cooling setups requiring quick and reliable connections.

€15.50*

Mangrove Jack's Hop Spider - INOX/RVS 800 micron

Made with a coarser, 800 micron mesh, for maximum wort flow and increased hop utilisation. Although we do not believe this is needed with the Grainfather brewing system, many of you would like to purchase one for your hops. We have therefore designed this with a specifically fitted hook design which can be hooked onto the side of any brew pot or the Grainfather system support ring. Perfect for those of you who would like the reassurance of a hop spider when brewing. This spider can be used for any kind of hops, including hop pellets. Specifications: Diameter: 15 cm Length: 30 cm Material: 800 micron 304 grade stainless steel mesh, with stainless steel support band and single hook.

€51.95*

Brewmaker Brew Belt verwarmingsriem 25 Watt

Brewmaker Brew Belt 25 Watt

The total length of the heating element is 95 cm. Using the cords on the ends the belt can be snuggly fit around vessels of different circumferences. Power consumption: 25 W, 220-240 V

€33.45*

Filter products

Others