Very handy mini kegs, known from commercial beers like Bittburger, Cuvee des Trolls, Grolsch, Dommelsch, ...
Easy to fill with your own homebrew and tap the beer using a CO2 beer tap like the Profi Tap.
With reusable rubber stopper.
Contents: 5 litres
Note: Rubber stopper with pressure valve is available separately.
This picnic tap faucet is used for a variety of applications, replacing worn out parts on party taps, or for dispensing home brew.
1/4" barb hose connection. We recommend hose 6 x 8 for use on the tap.
A small but effective tool to keep your beertaps clean and sanitary. This durable brush will keep fruit flies out of your beer taps.
Specifications:
Overall length 6 cm.
Brush length: 2.3cm
ATTENTION: Only cylinders purchased from Braumarkt can be refilledTo order a refill: order this product. After you send us your empty cylinder we check your empty bottle we will send you a new filled bottle in return.
See below; Safety data sheet UN1013 - Carbon dioxide in cylinders
Would you also like to serve your home-brewed beer on tap at a party? This matt black keg will not be out of place on your kitchen table at home. This keg is also available as a set with dispenser head, tap and carbonation socket.
Specifications:
Height: 26.5 cm
Diameter: 17.5 cm
Material: stainless steel
Colour: Matt Black
Content: 5 litres
These kegs are also suitable to be used for coldbrew coffee.
CO2 cartridges/carbon dioxide cartridges for use with various Growler kegs.
16 g CO2 per cartridge
10 threaded cartridges per box
NOTE: These cartridges do NOT fit the party tap fitting.
An easy to use beer dispenser with ball-lock connection. Fits all soda kegs with ball-lock connections.
Package includes:
1 Ball-lock connector for Beer.
1 Beer faucet with flowcontrol
Rubber stoppers with a pressure valve avoid swollen mini kegs as excessive CO2 escapes automatically. A pressure of about 2.5 bar is maintained inside the keg.
Would you also like to serve your home-brewed beer on tap at a party? This matt black keg will not be out of place on your kitchen table at home. This keg is also available as a set with dispenser head, tap and carbonation socket.
Specifications:
Height: 19.6 cm
Diameter: 13.5 cm
Material: stainless steel
Colour: Matt Black
Content: 2 litres
The Spundy from Keg King is a neat little gadget that works as well as any spunding valve on the market. With a low profile - just 4.5 cm tall - the Spundy doesn't take up much room in fermentation chambers or kegerators.
Spundy provides brewers with the ability to set the pressure control simply by turning the black valve tip clockwise to increase pressure or counter clockwise to release.
The built in pressure gauge lets brewers see exactly what pressure is being held from 0 to 30 PSI (2 Bar).
Spundy's pressure gauge unscrews for easy cleaning and can even be used with a pre-set PRV (pressure relief valve).
Replacing the valve tip with a PRV gives brewers the advantage of preselecting the pressure they want to hold before there is pressure present.
The CO2 tap faucet has a regulated CO2 flow and uses CO2 cartridges of 16 g. The beer tap can be moved from an empty keg to a full keg without the loss of carbon dioxide.