Cylindrical airlock for barrels from 10 L up to 60 L. Cylindrical airlocks are easier to clean than classic twin-bubble models and don't dry up as fast.
For barrels from 10 L up to 60 L
Dimensions (Ø x H): 3,5 cm x 6 cm
Suitable for an opening of 9 mm
Fill the airlock with a little water or disinfection solution so it acts as a siphon; the beer is closed of from the outside air by the water, hence preventing bacteria to enter. However the carbon dioxide formed during fermentation can escape.
The water in the airlock evaporates, so regularly checking and refilling is necessary!
Cylindrical airlock for barrels up to 20 L. Cylindrical airlocks are easier to clean than classic twin-bubble models and don't dry up as fast.
For barrels up to 20 L
Dimensions (Ø x H): 1 cm x 7 cm
Suitable for an opening of 9 mm
Fill the airlock with a little water or disinfection solution so it acts as a siphon; the beer is closed of from the outside air by the water, hence preventing bacteria to enter. However the carbon dioxide formed during fermentation can escape.
The water in the airlock evaporates, so regularly checking and refilling is necessary!
A silicone plug for airlocks.Flavourless and odourlessIdeal for placing an airlock in plastic barrels, buckets or jerry cansFits in a 16 mm holeFood safe
Airlock for barrels from 1 L up to 50 L.
For barrels from 1 L up to 50 L
Dimensions (Ø x H): 1 cm x 16 cm
Suitable for an opening of 9 mm
Fill the airlock with a little water or disinfection solution so it acts as a siphon; the beer is closed of from the outside air by the water, hence preventing bacteria to enter. However the carbon dioxide formed during fermentation can escape.
The water in the airlock evaporates, so regularly checking and refilling is necessary!
Semi-transparent bucket made from foodgrade HDPE. Lid Included.
Volume 25 litres
Complete with Handle
Lid with guarantee closure
Graduation
Natural Colour / semi transparent
Size: height 35 cm Ø 35 cm
Important: Bucket is without spigot.
Volume 5 litres
Material: Glass
Colour: White/transparent
Neck opening: 28/29mm
Size: height 35 cm Ø 17 cm
Closure: rubber cap n°4, silicone or rubber stopper, 26x32 mm, with or without hole, of air lock. (cap or stopper and air lock are not included)
Note:
Never use boiling water to clean the bottle. This may break the glass.
Clean the bottle with warm water, a bottle brush and a Puro-Oxi or sulphite solution.Do not lift a filled bottle by the earpiece or neck but use the handles of the included basket (if it is part of the product) and support the bottom by hand.Depending on the supplier's deliveries, you might receive a round or a straight handle, unfortunately it is not possible to make a choice.
Bottle full? This bottel filler stops automatically when you remove the beer bottle.Fits on the drain valve for barrels of 30-60 liter and Braumarkt brew bucketsLength: 40 cmFills the liquid along the bottom so minimal oxidationDoes not fit on the valves of Speidel Barrels!
Bottle full? This bottel filler stops automatically when you remove the beer bottle.
Fits on the drain valve for barrels of 30-60 liter and Braumarkt brew buckets
Length: 34 cm
Fills the liquid along the bottom so minimal oxidation
Does not fit on the valves of Speidel Barrels!
The egg of Columbus. The bottel filler stops automatically when you remove the beer bottle.
Fits the drain valve for barrels of 30-60 ltr. and on the buckets of Brouwmarkt.
Length: 22 cm
Fills the liquid along the bottom with minimal oxidation
Silicone stopper without holeSize: 47 x 55 mm (bottom diameter x top diameter)Material: high quality nutritionally suitable siliconeResistant to high temperaturesAbsolutely tasteless and odourlessVery suitable for closing bottles, wooden barrels, tanks or for laboratory use.
Self adhesive thermometer, works with liquid crystals that continuously check the temperature of your barrel or bottle.
Ideal for checking the fermentation temperature of your fermentation vessels.
Indispensable for every wine maker and brewer!
Simply stick on.
No batteries required!
Wide temperature range: 10-40°C
No risk of glass breakage
Cylindrical airlock for barrels from 30 L up to 210 L. Does fit our 31 L and 60 L fermenters and all Speidel/Graf-type fermenters.
Cylindrical airlocks are easier to clean than classic twin-bubble models and don't dry up as fast.
For barrels from 30 L up to 210 L
Afmetingen (Ø x H): 8 cm x 11 cm
Geschikt voor een opening van 17 mm
Fill the airlock with a little water or disinfection solution so it acts as a siphon; the beer is closed of from the outside air by the water, hence preventing bacteria to enter. However the carbon dioxide formed during fermentation can escape.
The water in the airlock evaporates, so regularly checking and refilling is necessary!
Volume 5 litres
Material: Glass
Colour: White/transparent
Neck opening: 40 mm
Size: height 45 cm Ø 35 cmClosure: rubber cap n°5, silicone or rubber stopper, 36x44 mm, with or without hole, of air lock. (cap or stopper and air lock are not included)
Note:
Never use boiling water to clean the bottle. This may break the glass.
Clean the bottle with warm water, a bottle brush and a Puro-Oxi or sulphite solution.Do not lift a filled bottle by the earpiece or neck but use the handles of the included basket (if it is part of the product) and support the bottom by hand.
Silicone stopper with holeSize: 31 x 38 mm (bottom diameter x top diameter)With hole 9 mmMaterial: high quality nutritionally suitable siliconeResistant to high temperaturesAbsolutely tasteless and odourlessVery suitable for closing bottles, wooden barrels, tanks or for laboratory use.
Brewing bucket semi transparent for pulp and main fermentation complete with:
Lid
Size distribution
Handle
Tap
Airlock
Connection for the water seal by means of a 100% silicone plug
Especially suitable for foodstuffs.
Ideal for pulp and main fermentation.
Measurements: height 27.5 cm Ø 27.5 cm
Content 12 Litres.
Before use:
Mount the tap in the bucket with the white ring on the outside. Hold the white part on the outside of the tap and carefully tighten the nut on the inside. Over tightening causes leakage.
Place the bucket on the edge of the table and fill it with 5 Litres of water to test for leaks before use.
The temperature of the liquid in the brewing bucket most never exceed 65 ° C.
Prevent damage from scratching the plastic to prevent unwanted bacteria.
Brew buckets are ideally suited for the 1st or main fermentation because there is sufficient CO2 above the liquid.
Always use a fermentation vessel with rubber ring for 100% sealing, or a glass bottle with stopper and airlock.
Silicone stopper without holeSize: 31 x 38 mm (bottom diameter x top diameter)Material: high quality nutritionally suitable siliconeResistant to high temperaturesAbsolutely tasteless and odourlessVery suitable for closing bottles, wooden barrels, tanks or for laboratory use.