Low Prices
Large selection
Fast Shipping
Secure Payments
Best Quality
Filter
Tip
Easybrew Fermenting Bucket 30 with Dry-Hop Lid
Conical stainless steel 30 liters fermenter, ideal for brews up to about 25 liters equipped with dry-hop opening in the lid. The conical bottom creates a concentrated yeast deposit that allows you to easily drain clear beer through the tap in the cone. As the lid, just as with a brewing bucket, covers the entire width, this fermenter is super easy to clean. Moreover, this is also very convenient when making kombucha, you can easily remove the SCOBY from the fermenter. This fermentation vessel comes with a convenient feed hole for dry-hopping. Features Volume: 30 l Stainless steel lid with silicone seal and cylindrical airlock Matt stainless steel finish (AISI 304) Equipped with conical bottom 3 legs 2 stainless steel handles Thermometer 0-40°C included 3/8" ball valve in the cone Total outlet with 1/2" tap on the bottom Convenient inlet 1.5" with tri-clamp coupling. Volume markings on the inside (in liters /gal) Dimensions: Height 58 cm, diameter 35 cm.

€179.00*

Available
Insulation Jacket for FB60 Fermenter
The Easybrew insulation jacket is a handy accessory for those cold winter days. It will help you to keep the temperature in your fermenter during colder days to prevent your fermentation from stalling.

€37.95*

Available
Easybrew FB60 Fermenting Bucket 60L
60 liter stainless steel conical fermenter, ideal for breing up to 50 liters. The conical bottom concentrated the yeast depot so that you can easily get clear beer through the ball valve in the cone.Since the lid covers the entire width of the fermenter, just like a bucket, this fermenter is super convenient to clean. This is also very useful for kombucha, you can easily remove the SCOBY from the fermentation vessel.volume: 60 lstainless steel lid with silicone seal and cylindrical airlockmatte stainless steel finish (AISI 304)equipped with conical bottom3 feet2 stainless steel handlesthermometer 0-40°C 3/8" ball valve in the cone dump valve on conical bottom with  3/4" stainless steel valvevolume markings on the inside (liters / gal) Dimensions: Height 70 cm, Diameter 47 cm.

€279.00*

Available
New
Easybrew Fermenting Bucket 30L with Thermowell
30 liter stainless steel conical fermenter, ideal for brewing up to 25 liters. The conical bottom concentrated the yeast depot so that you can easily get clear beer through the ball valve in the cone. Since the lid covers the entire width of the fermenter, just like a bucket, this fermenter is super convenient to clean. This is also very useful for kombucha, you can easily remove the SCOBY from the fermentation vessel. Included in the lid is 150mm Thermowell where you can easily insert a temprature probe for temprature controlled fermentation. Specifications: volume: 30 l stainless steel lid with silicone seal and cylindrical airlock Stainless steel Thermowell (150mm) matte stainless steel finish (AISI 304) equipped with conical bottom 3 feet2 stainless steel handles thermometer 0-40°C 3/8" ball valve in the cone dump valve on conical bottom with 1/2" stainless steel valve volume markings on the inside (liters / gal) Dimensions: Height 58 cm, diameter 35cm.

€169.95*

Available
New
Easybrew Chillercoil for 30L bucket
The Easybrew Chillercoil is one of those tools that can help you brew better beers. The Chillercoil allows you to control the fermentation temperature of your wort. Specifications: Material: 304 stainless steel Coil Length: 4.7m. Hole for airlock.

€84.95*

Available
New
Easybrew Chiller for 60L Bucket
The Easybrew Chillercoil is one of those tools that can help you brew better beers. The Chillercoil allows you to control the fermentation temperature of your wort. Specifications: Material: 304 stainless steel Coil Length: 13m. Hole for airlock.

€89.95*

Available
New
Insulation Jacket for FB30 fermenters
The Easybrew insulation jacket is a handy accessory for those cold winter days. It will help you to keep the temperature in your fermenter during colder days to prevent your fermentation from stalling.

€27.95*

Available
Tip
Easybrew Fermenting Bucket 30L
30 liter stainless steel conical fermenter, ideal for brewing up to 25 liters. The conical bottom concentrated the yeast depot so that you can easily get clear beer through the ball valve in the cone. Since the lid covers the entire width of the fermenter, just like a bucket, this fermenter is super convenient to clean. This is also very useful for kombucha, you can easily remove the SCOBY from the fermentation vessel. Specifications: volume: 30 l stainless steel lid with silicone seal and cylindrical airlock matte stainless steel finish (AISI 304) equipped with conical bottom 3 feet2 stainless steel handles thermometer 0-40°C 3/8" ball valve in the cone dump valve on conical bottom with 1/2" stainless steel valve volume markings on the inside (liters / gal) Dimensions: Height 58 cm, diameter 35cm.

€159.00*

Available
Brewing Bucket Semi-Transparent Complete - 25 litres
'Semi-transparent bucket made from foodgrade HDPE. Contains of a lid (with pre-drilled hole), volume indicator, handle, spigot, airlock and silicone plug for airlock. Perfect as fermenter or bottling bucket. Volume: 25 litresWidth with lid : 38cm Height with lid : 36cm Diameter : 100cm Important: Mount the rubber ring of the spigot on the outside of the bucket. Tighten the nut on the inside carefully. Overtightening can cause leakage!

€10.95*

not Available
Tip
Easybrew Fermenting Bucket 60L with Dry-Hop Lid
Conical stainless steel 60 liters fermenter, ideal for brews up to about 50 liters equipped with dry-hop opening in the lid. The conical bottom creates a concentrated yeast deposit that allows you to easily drain clear beer through the tap in the cone. As the lid, just as with a brewing bucket, covers the entire width, this fermenter is super easy to clean. Moreover, this is also very convenient when making kombucha, you can easily remove the SCOBY from the fermenter. This fermentation vessel comes with a convenient feed hole for dry-hopping. Features Volume: 60 l Stainless steel lid with silicone seal and cylindrical airlock Matt stainless steel finish (AISI 304) Equipped with conical bottom 3 legs 2 stainless steel handles Thermometer 0-40°C included 3/8" ball valve in the cone Total outlet with 1/2" tap on the bottom Convenient inlet 1.5" with tri-clamp coupling. Volume markings on the inside (in liters /gal) Dimensions: Height 70 cm, diameter 47 cm.

€299.00*

Available