'Semi-transparent bucket made from foodgrade HDPE. Contains of a lid (with pre-drilled hole), volume indicator, handle, spigot, airlock and silicone plug for airlock.
Perfect as fermenter or bottling bucket.
Volume: 25 litresWidth with lid : 38cm
Height with lid : 36cm
Diameter : 38 cm
Important: Mount the rubber ring of the spigot on the outside of the bucket. Tighten the nut on the inside carefully. Overtightening can cause leakage!
Brewing bucket semi transparent for pulp and main fermentation complete with:
Lid
Size distribution
Handle
Tap
Airlock
Connection for the water seal by means of a 100% silicone plug
Especially suitable for foodstuffs.
Ideal for pulp and main fermentation.
Measurements: height 27.5 cm Ø 27.5 cm
Content 12 Litres.
Before use:
Mount the tap in the bucket with the white ring on the outside. Hold the white part on the outside of the tap and carefully tighten the nut on the inside. Over tightening causes leakage.
Place the bucket on the edge of the table and fill it with 5 Litres of water to test for leaks before use.
The temperature of the liquid in the brewing bucket most never exceed 65 ° C.
Prevent damage from scratching the plastic to prevent unwanted bacteria.
Brew buckets are ideally suited for the 1st or main fermentation because there is sufficient CO2 above the liquid.
Always use a fermentation vessel with rubber ring for 100% sealing, or a glass bottle with stopper and airlock.
Sturdy plastic fermenter of 31 litres made of foodgrade HDPE. With airtight screw cap, spigot, big airlock and additional screw cap (to replace the airlock). Easy to carry (even full) thanks to the integrated handles. The big opening makes is very easy to clean.
Because of the limited height this fermenter fits easily in any normal fridge.
Volume: 31 litres
Diameter: 40 cm
Height: 36 cm without airlock, 48 cm with airlock
Comes with spigot, big airlock and screw cap (to replace the airlock)
Sturdy plastic fermenter of 60 litres made of foodgrade HDPE. With airtight screw cap, spigot, big airlock and additional screw cap (to replace the airlock). Easy to carry (even full) thanks to the integrated handles. The big opening makes is very easy to clean.
Volume: 60 litres
Diameter: 40 cm
Height: 61 cm without airlock, 73 cm with airlock
Comes with spigot, big airlock and screw cap (to replace the airlock)
Plastic fermenter, rectangular model: With lid (diameter 12,5 cm)Made of Food Grade HDPEWith iron handle With tap 5/8”Dimensions L x W x H: 20 x 17 x 26 cm.Content 5 liter.Airlock and stopper 31 x 38 not included.
Budget friendly Demi John. Including Airlock and silicone plug.
Specifications:
Volume 5 litres
Material: Glass
Colour: White/transparent
Neck opening: 28/29mm
Size: height 35 cm Ø 17 cmIncluding Stop and Airlock
Note:
Never use boiling water to clean the bottle. This may break the glass.
Clean the bottle with warm water, a bottle brush and a Puro-Oxi or sulphite solution.Do not lift a filled bottle by the earpiece or neck but use the handles of the included basket (if it is part of the product) and support the bottom by hand.Depending on the supplier's deliveries, you might receive a round or a straight handle, unfortunately it is not possible to make a choice.Be adviced. It's not possible to place a swing cap on this bottle.
Volume 5 litres
Material: Glass
Colour: White/transparent
Neck opening: 28/29mm
Size: height 35 cm Ø 17 cm
Closure: rubber cap n°4, silicone or rubber stopper, 26x32 mm, with or without hole, of air lock. (cap or stopper and air lock are not included)
Note:
Never use boiling water to clean the bottle. This may break the glass.
Clean the bottle with warm water, a bottle brush and a Puro-Oxi or sulphite solution.Do not lift a filled bottle by the earpiece or neck but use the handles of the included basket (if it is part of the product) and support the bottom by hand.Depending on the supplier's deliveries, you might receive a round or a straight handle, unfortunately it is not possible to make a choice.Be adviced. It's not possible to place a swing cap on this bottle.
Plastic fermenter made from high quality white foodgrade HDPE (High Density Polyethylene) which is acid and alcohol resistant. Has a large top opening for easy cleaning and comes with spigot, rubber stopper and cylindrical airlock.
Capacity: 30 litres
Plastic fermenter made from high quality white foodgrade HDPE (High Density Polyethylene) which is acid and alcohol resistant. Has a large top opening for easy cleaning and comes with spigot, rubber stopper and cylindrical airlock.
Capacity: 60 litres
Plastic fermenter made from high quality white foodgrade HDPE (High Density Polyethylene) which is acid and alcohol resistant. Has a large top opening for easy cleaning and comes with spigot, rubber stopper and cylindrical airlock.
Capacity: 120 litres
Speidel 50 litres co2 pressure barrel for juices and cider.
With this handy Speidel 50 litre pressure barrel you can keep your own drinks for months without the addition of (chemical) preservatives. Tap your own fermented drinks fresh wine, cider, beer and sparkling wine, just like in a pub: only 0.5 to 1 bar of carbon dioxide pressure keeps the drink fresh for months and provides sufficient 'tap pressure'.
Produce your own mildly sparkling mineral water by adding carbon dioxide to regular tap water. For all lovers of soft drinks with a low amount of carbon dioxide. No more lugging with crates of mineral water and always fresh on tap.
Determine the alcohol content of your fruit juice or most made from apples, pears, berries or grapes. The shorter the container stays open during or after filling, the less fermentation and the lower the alcohol content will be (max.10 bar pressure due to fermentation).