Grainfather GF30 Fermenter Basic Cooling Edition EU

€559.00*

Available, delivery time 1-3 days

Product number: 5011787

Manufacturer: Grainfather

Product information "Grainfather GF30 Fermenter Basic Cooling Edition EU"

The Grainfather Conical Fermenter Basic Cooling Edition includes the Conical Fermenter and Cooling Pump Kit.

This allows you to control the heating of your unit and cooling via the Cooling Pump Kit, dump yeast, take samples and transfer your wort via our innovative dual function valve design.

What's included:

Conical Fermenter
Fermenter Lid
Rubber Bung
Bubbler Airlock
Cone Plug
Cone Plug Seal
5 cm (2") Tri Clamp
Digital Temperature Display
Power Adapter and Wall Plug
2 m (6.5 ft) M12 3-Pin Power Cord
Dual Valve Tap
Digital Temperature Controller

Specifications:

304 Stainless Steel Body (polished inner and brushed outer)
30 L (8 US Gal) capacity (volume markings on inner body up to 25 L (7 US Gal)
30 W, 12 V heating power
3.8 cm (1.5") ferrule on lid (for pressure transfer attachments)
5 cm (2") ferrule on bottom of cone
Dual Valve Tap with 110 mm (4.3”) inlet

Dimensions of Conical Fermenter:

Diameter with handles: 360 mm
Height (without airlock): 910 mm
Height with bubbler airlock: 1090 mm

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Be the first to share your insights.

Alternatives

Tip

New

Easybrew Fermenting Bucket 30 with Dry-Hop Lid

Conical stainless steel 30 liters fermenter, ideal for brews up to about 25 liters equipped with dry-hop opening in the lid. The conical bottom creates a concentrated yeast deposit that allows you to easily drain clear beer through the tap in the cone. As the lid, just as with a brewing bucket, covers the entire width, this fermenter is super easy to clean. Moreover, this is also very convenient when making kombucha, you can easily remove the SCOBY from the fermenter. This fermentation vessel comes with a convenient feed hole for dry-hopping. Features Volume: 30 l Stainless steel lid with silicone seal and cylindrical airlock Matt stainless steel finish (AISI 304) Equipped with conical bottom 3 legs 2 stainless steel handles Thermometer 0-40°C included 3/8" ball valve in the cone Total outlet with 1/2" tap on the bottom Convenient inlet 1.5" with tri-clamp coupling. Volume markings on the inside (in liters /gal) Dimensions: Height 58 cm, diameter 35 cm.

€179.00*

Plastic Barrel 31 litres with Screw Lid (Air-Tight)

The ideal solution to store your malts safely! Volume: 31 litres Diameter: 40 cm Height: 33 cm

€19.95*

Speidel CIP and filling lid for FD tanks

This lid is suitable for Speidel standard FD tank of 60 till 625 Litres,

€499.00*

Kellermeister 65 litres Conical Fermenter with Thermometer

The Kellermeister is a conical tank, ideal for unpressurised fermentation. The lid with dipping edge (reservoir with water around the edge) acts as a fermentation lock, so no separate airlock is necessary. Due to its special design the yeast collects in the cone and can be harvested and re-used. Fermented beer can be tapped off and bottled at the clear beer tap. The Kellermeister is made of food-safe polyethylene. Due to its smooth inner surface it is very easy to clean. Two stainless steel outlet ports (3?4" female thread) each fitted with a plastic valve. Includes thermometer Capacity: 65 litres

€338.75*

Speidel 1" Stainless Steel Ball Valve for Ferment-Egg

Speidel 1"stainless steel ball valve for Ferment EggMale connector - Female connector 1 ", V2 For the FermentEgg 2 spigots are necessary.

€59.50*

Brewing Bucket Semi-Transparent Complete - 25 litres

'Semi-transparent bucket made from foodgrade HDPE. Contains of a lid (with pre-drilled hole), volume indicator, handle, spigot, airlock and silicone plug for airlock. Perfect as fermenter or bottling bucket. Volume: 25 litresWidth with lid : 38cm Height with lid : 36cm Diameter : 100cm Important: Mount the rubber ring of the spigot on the outside of the bucket. Tighten the nut on the inside carefully. Overtightening can cause leakage!

€10.95*

Plastic Barrel 60 litres with Screw Lid (Air-Tight)

The ideal solution to store your malts safely! Volume: 60 litres Diameter: 40 cm Height: 61 cm

€25.95*

Grainfather Stainless Steel Fermenter with Spigot - 25 litres

Professional Stainless Steel Fermenter with Spigot. Volume: 25 L High grade #304, scratch resistant, stainless steel body Handles for easy lifting of the fermenter Seamless inside finish for easy cleaning to prevent contamination Litre measurement stamped on the inside body of fermenter Includes bung and bubbler airlock Height = 520mm (to top of lid) Height = 620mm (including vintage airlock) Height = 480mm (to top edge without lid)

€144.95*

FastFerment™ carrying strap

This sturdy carrying strap, made for polypropylene, is ideal for transporting your FasFerment™ 7.9G in a comfortable way.

€8.50*

Fastferment™ Collection ball for 14G

Rubber bung and teflon tape included.Used for harvesting and staring yeast.Volume: 1200 ml.

€19.95*

Bottle filler for tap Large

Bottle full? This bottel filler stops automatically when you remove the beer bottle.Fits on the drain valve for barrels of 30-60 liter and Braumarkt brew bucketsLength: 40 cmFills the liquid along the bottom so minimal oxidationDoes not fit on the valves of Speidel Barrels!

€3.25*

Spigot for Plastic Speidel Fermenters

Fits all plastic Speidel storage tanks/fermenters.

€4.95*

FastFerment™ stand extension kit

These Leg Extensions allow you to extend the Stand for the 14G FastFerment™. This way a Keg can be fitted under the FastFerment™ for easy filling.50,8 cm in length12 mm Diameter Legs and 14 mm diameter RingWorks for 14G (53L) versionsHeight from Ground to Airlock - 156.7 cm Height from Ground to Top of Lid - 147.8 cmTotal Clearance from Valve to Ground for Kegging 66 cm

€36.95*

Grainfather GF30 Fermenter Basic Cooling Edition EU

The Grainfather Conical Fermenter Basic Cooling Edition includes the Conical Fermenter and Cooling Pump Kit. This allows you to control the heating of your unit and cooling via the Cooling Pump Kit, dump yeast, take samples and transfer your wort via our innovative dual function valve design. What's included: Conical Fermenter Fermenter LidRubber BungBubbler AirlockCone PlugCone Plug Seal5 cm (2") Tri ClampDigital Temperature DisplayPower Adapter and Wall Plug2 m (6.5 ft) M12 3-Pin Power CordDual Valve TapDigital Temperature ControllerSpecifications: 304 Stainless Steel Body (polished inner and brushed outer)30 L (8 US Gal) capacity (volume markings on inner body up to 25 L (7 US Gal)30 W, 12 V heating power3.8 cm (1.5") ferrule on lid (for pressure transfer attachments)5 cm (2") ferrule on bottom of coneDual Valve Tap with 110 mm (4.3”) inletDimensions of Conical Fermenter:Diameter with handles: 360 mm Height (without airlock): 910 mm Height with bubbler airlock: 1090 mm

€559.00*

Grainfather conical fermenter cooling pump kit

Temperature control is one of the most crucial elements for producing a beer of good quality. It must be regulated throughout the fermentation process and be stable to ensure that the yeast does not get stressed and ferment in the right way to get the right flavor profile. To cool off with the Grainfather Conical Fermenter, you must have the Conical Fermenter Temperature Controller. As soon as your target temperature is lower than the temperature of the wort in your digester, the cooling pump set pumps ice-cold water through the double-walled, insulated interior to cool your wort. Simply connect the couplings and insulated hoses to the Conical Fermenter, immerse the submersible pump in a cool box with water (add ice for the desired temperature) and pump the liquid through the insulated cooling of the Conical Fermenter housing.

€69.95*

Fastferment™ Mason Jar adaptor kit

Adaptor to Fit Mason Jars for the FastFerment™ 7.9G. Works for 95% of Wide Mouth Mason Jars. Food Grade Plastic. Includes gasket.To collect and reuse yeastUse big or small mason jars for yeast/trub collection

€9.95*

Kellermeister 30 litres Conical Fermenter with Thermometer

€288.95*

Grainfather conical fermenter cooling connect kit

The Grainfather Conical Fermenter Cooling Connection Kit allows you to connect additional Conical Fermenters to The Grainfather Glycol Chiller. . 2 x Cooling Connection Couplers 2 x 2 m (6,5 ft) hoses

€44.95*

Plastic Fermenter 120 litres with Spigot and Airlock

Sturdy plastic fermenter of 120 litres made of foodgrade HDPE. With airtight screw cap, spigot, big airlock and additional screw cap (to replace the airlock). Easy to carry (even full) thanks to the integrated handles. The big opening makes is very easy to clean. Volume: 120 litres Diameter: 50 cm Height: 78 cm without airlock, 90 cm with airlock Comes with spigot, big airlock and screw cap (to replace the airlock)

€59.95*

NW25 T-Adapter piece for Speidel pressure tanks

€130.00*

Grainfather Pressurized Transfer kit

Easy to attach to the Grainfather Conical Fermenter, for a clean and easy way to transfer your beer without having to lift the fermenter to perform a gravity fed transfer. This also ensures that there is less chance of oxygen during transfer. All you need is a C02 bottle and a regulator to attach pressure transfer and you can transfer your beer into a barrel or bottles via the Conical Fermenter's double condensation valve or through the top of the fermenter lid using the beer rack. NOTE: Batteries are not included for the manometer. 2 x AAA batteries are required.

€59.95*

FastFerment™ Insulated Jacked

The Insulated Jacket is a system that’s affordable and gets the job done to create ideal brewing and winemaking temperatures in the FastFerment™ 7.9G. Simply place frozen (plastic) bottles of water inside the jacket to lower the temperature.Compatible with the FastFerment™ 7.9G (with the wall mounts or with the stand)Airlock remains outside of the jacket (= visible) Sturdy nylon exterior with waterproof thermo plastic insideDimensions: 52 cm diameter, 86 cm tallThe Insulated Jacket works great up to a 17°C drop below room temperature! See manual for tips on maintaining a constant temperature.

€44.95*

Plastic Fermenter 60 litres with Spigot and Airlock

Sturdy plastic fermenter of 60 litres made of foodgrade HDPE. With airtight screw cap, spigot, big airlock and additional screw cap (to replace the airlock). Easy to carry (even full) thanks to the integrated handles. The big opening makes is very easy to clean. Volume: 60 litres Diameter: 40 cm Height: 61 cm without airlock, 73 cm with airlock Comes with spigot, big airlock and screw cap (to replace the airlock)

€31.95*

Easybrew FB60 Fermenting Bucket 60L

60 liter stainless steel conical fermenter, ideal for breing up to 50 liters. The conical bottom concentrated the yeast depot so that you can easily get clear beer through the ball valve in the cone.Since the lid covers the entire width of the fermenter, just like a bucket, this fermenter is super convenient to clean. This is also very useful for kombucha, you can easily remove the SCOBY from the fermentation vessel.volume: 60 lstainless steel lid with silicone seal and cylindrical airlockmatte stainless steel finish (AISI 304)equipped with conical bottom3 feet2 stainless steel handlesthermometer 0-40°C 3/8" ball valve in the cone dump valve on conical bottom with 3/4" stainless steel valvevolume markings on the inside (liters / gal) Dimensions: Height 70 cm, Diameter 47 cm.

€279.00*