Product information "Grainfather S40 brewing system"
The Grainfather S40 brewing system has a 46L capacity, allowing you to create 40L of your own beer every time that you brew. This product has a high grade stainless steel build and is packed full of features to make every brew easy.
Features:
304 grade stainless steel body
Easily manage heating using the digital controller with colour display
Built in pump for maximum brewing efficiencies
Easily cool wort with the stainless steel immersion chiller
30 liter stainless steel conical fermenter, ideal for brewing up to 25 liters. The conical bottom concentrated the yeast depot so that you can easily get clear beer through the ball valve in the cone.
Since the lid covers the entire width of the fermenter, just like a bucket, this fermenter is super convenient to clean. Caution: do not lift the fermenter when full.
Specifications:
Volume: 30 l
Stainless steel lid with silicone seal and cylindrical airlock
Matte stainless steel finish (AISI 304)
Equipped with conical bottom
3 feet2 stainless steel handles
Thermometer 0-40°C
3/8" ball valve in the cone
Dump valve on conical bottom with 1/2" stainless steel valve
Volume markings on the inside (liters / gal)
Dimensions: Height 58 cm, diameter 35cm.
The Grainfather Conical Fermenter Basic Cooling Edition includes the Conical Fermenter and Cooling Pump Kit.
This allows you to control the heating of your unit and cooling via the Cooling Pump Kit, dump yeast, take samples and transfer your wort via our innovative dual function valve design.
What's included:
Conical Fermenter
Fermenter LidRubber BungBubbler AirlockCone PlugCone Plug Seal5 cm (2") Tri ClampDigital Temperature DisplayPower Adapter and Wall Plug2 m (6.5 ft) M12 3-Pin Power CordDual Valve TapDigital Temperature ControllerCooling pump kitSpecifications:
304 Stainless Steel Body (polished inner and brushed outer)30 L (8 US Gal) capacity (volume markings on inner body up to 25 L (7 US Gal)30 W, 12 V heating power3.8 cm (1.5") ferrule on lid (for pressure transfer attachments)5 cm (2") ferrule on bottom of coneDual Valve Tap with 110 mm (4.3”) inletDimensions of Conical Fermenter:Diameter with handles: 360 mm
Height (without airlock): 910 mm
Height with bubbler airlock: 1090 mm
Professional Stainless Steel Fermenter with Spigot.
Volume: 25 L
High grade #304, scratch resistant, stainless steel body
Handles for easy lifting of the fermenter
Seamless inside finish for easy cleaning to prevent contamination
Litre measurement stamped on the inside body of fermenter
Includes bung and bubbler airlock
Height = 520mm (to top of lid) Height = 620mm (including vintage airlock) Height = 480mm (to top edge without lid)
A redesigned perforated grain basket for the G30 Brewing System which removes the need for a top plate and additional pipework. This basket comes as a standard with the G30v3 but can be purchased as an upgrade for previous versions of the G30 Brewing System
Packaging Content:
1 x G30v3 Perforated Basket
Bottom Grain Plate
Silicone Recirculation Hose
A simple analogue thermometer to measure the temperature of wort during fermentation. Can be used with the Grainfather SF70 or the Grainfather Thermowell.
Enhance Your Grainfather G30 Brewing System with the G30 Hop Plate
Take your brewing experience to the next level with the G30 Hop Plate, a dedicated false bottom style hop plate filter designed for use with all G30 Brewing Systems. By incorporating this innovative accessory alongside your G30 system's existing filter, you'll achieve increased efficiency in hop filtration.
How to use:
Install the G30 Filter (this is the hop filter included with the G30) as per the instructions included with the G30 Brewing System.
Install the G30 Hop Plate by placing the plate feet down into the boiler over the top of the G30 filter, so the feet of the hop plate rest flat on the base of the boiler.
Kdey Features:
Premium 304 Grade Stainless Steel: Crafted from sleek and durable 304 grade stainless steel, ensuring longevity and quality.
Ease of Maintenance: The G30 Hop Plate is designed for easy cleaning, simplifying your brewing process.
Full Body False Bottom Style Filter: This filter design ensures even better hop filtration, enhancing the clarity and quality of your brew.
Tailored for G30 Brewing System: The G30 Hop Plate is purpose-built for the G30 Brewing System, ensuring a seamless fit and maximum performance.
Important Notes:
Please be aware that some users may notice a slight reduction in boil vigour and a minor increase in heating time.
Exercise caution when dealing with post-boil hop matter, as it retains heat. Always use thermally insulated gloves when removing the hop plate post-boil.
Upgrade your Grainfather G30 Brewing System and experience superior hop filtration with the G30 Hop Plate. Elevate the quality of your brews, ensuring they meet your exacting standards.
A redesigned perforated grain basket for the G70 Brewing System which removes the need for a top plate and additional pipework. This basket comes as standard with the G70v2 but can be purchased as an upgrade for previous versions of the G70 Brewing System.
Contents:
1x G70 Perforated Basket
Grain Plate
Rexirculation Barb & Hose
Specifications:
Grain capacity: Up to 16 Kg
Maximum Batch size: 60 L
304 Stainless Steel
The G30ᵌ is an all-in-one brewing system with a 30 L (8 US Gal) capacity, designed to make up to 40 pints of high-quality beer from one brew. With Grainfather App integration, great features, and an intuitive design, it’s perfect for both beginner and experienced all grain brewers to master their all grain brewing journey.
Features:
Sleek 304 grade stainless steel body
Connect your mobile device to the Bluetooth controller via the Grainfather App and manage your brew remotely
Use with the GCAST Bluetooth Wi-Fi Bridge to bridge the connection between your G30 Controller and Grainfather App through Wi-Fi to give you more flexibility to move around during your brew day
A robust magnetic drive pump for maximum brewing efficiencies
Perforated grain basket negates the need for a top plate and no additional pipework needed
Efficient and sanitary brew transfer with the Counterflow Chiller
Compatible with the Still Spirits T500 Alembic Dome & Condenser
Backed by a 3-year warranty
Compatible with:
GF30 Conical Fermenter
GSERIES Glycol Chillers
GCAST Wireless Bridging Device
SF50 Conical Fermenter
GCA Glycol Chiller Adapter
Alembic Dome
Included in the box:
Grainfather G30ᵌ
Bluetooth controller
Counterflow Chiller
NEW Perforated grain basket
Grain plate
Lifting bar
Glass lid
Recirculation pipe
Filter
Hose fittings
Built-in pump
Technical >Dimensions:
Size: 685 x 386mm (27 x 15’’)
Weight: 14.6kg (32lb)
Max Preboil Volume: 30L (8 US Gal)
Batch Volume: Max: 25L (7 US Gal) | Min: 10L (3 US Gal)
Grain Bill: Max: 8kg (18lb)* | Min: 1.5kg (11lb) *9kg (20lb) with top plate
Power: NZ, AU, EU, UK,: 2000W, 220V
Connectivity: Bluetooth control
The Grainfather G70: bigger and even better! You need more capacity than the Grainfather Connect? Us the all new Grainfather G70! Mashing, sparging, boiling and chilling in one device, Grainfather quality with app integration and smart brewing technology. Ideal for consistent and reliable brewing.
New:
Perforated grain basket for an improved brewing experience with no top plate or additional pipework required Updated:
Integrated sight glass now a part of the recirculation pipework for easy volume reading.
Features:
capacity 70 litre (for 65litre recipes, minimum recipe size 40 litres)
smart control with built-in wireless connectivity and mobile app integration for step-by-step remote controlled brewing
access to brewing tools, recipes and calculators
max. grain bill: 17 kg
conical base for maximum brewhouse efficiency
PID heating control: large conical heating element for efficient heating
CIP capability, including cleaning filter
large counterflow wort chiller, including more powerful pump
rolled edge mash plates: no silicone seals
large dual-stage hop filter: hopping rate of up to 1.5 kg
integrated sight glass for easy volume readings; replace with the sight glass cleaning barb to easily recirculate a cleaning solution
mash recirculation hose and barb: easy to install and remove for efficient mashing
3 year warranty
Technical data:
EU model.
body: stainless steel 304
220-240 V, 3300 W (heating element 3150 W)
Weight machine : 36,5 kg
Size machine: 83 cm x 53 cm
Mash Tun Dead Space Volume: 6,8L
Boil-Off rate: 4L / hour
Large, fragile, heavy, or items that are too large for normal shipping are delivered by pallet or courier service. We will contact you to discuss shipment and shipping rates.
Control and power up to two fermenters at different temperatures and fermentation schedules with the GC2. By accurately controlling the temperature of your fermentation, you can produce consistent beers, every time. The Chiller will be shipped with Glycol and one Cooling connection kit.
Features:
Control and power up to two fermenters at different temperatures and fermenting schedules.
Use with the GCA Glycol Chiller Adapter to connect to the Grainfather S SERIES range of fermenters or most other fermenters.
Sleek and compact design with LED control display
Compatible with the Grainfather App when connected to a Grainfather G SERIES fermenter or the GCA for managing your fermentation from anywhere via Wi-Fi
Backed by a 3-year warranty
Dimensions:
583 x 320 x 363mm
19.5kg
3L Glycol tank
Package content:
GC2 Glycol Chiller
Propylene glycol*
1 x Cooling connect kit
Glycol funnel
Silicone tubing for priming pump
Control and power up to two fermenters at different temperatures and fermentation schedules with the GC2. By accurately controlling the temperature of your fermentation, you can produce consistent beers, every time. The Chiller will be shipped with Glycol and one Cooling connection kit.
Features:
Control and power up to two fermenters at different temperatures and fermenting schedules.
Use with the GCA Glycol Chiller Adapter to connect to the Grainfather S SERIES range of fermenters or most other fermenters.
Sleek and compact design with LED control display
Compatible with the Grainfather App when connected to a Grainfather G SERIES fermenter or the GCA for managing your fermentation from anywhere via Wi-Fi
Backed by a 3-year warranty
Dimensions:
583 x 320 x 363mm
19.5kg
3L Glycol tank
Package content:
GC2 Glycol Chiller
Propylene glycol*
1 x Cooling connect kit
Glycol funnel
Silicone tubing for priming pump
The G40 or the G70 paired with the Distilling Lid offers an all-in-one automated brewing system that can also be used to distill, making it the ultimate combo to brew high quality beer and distill spirits from grain. This lid features an industry standard 4” tri-clamp opening to allow for the connection of the Still Spirits T500 Reflux and Alembic Condensers, as well as third-party distilling equipment.
Specifications:
Material: 304 Grade Stainless Steel Construction
Standard 4” tri-clamp opening (industry standard)
Pressure relief valve
Barrel clamp locking mechanism
The Grainfather electric malt mill is motorised, compact and easy to use at home. It is equipped with large rollers that crack the outer shell of the grain lengthwise, creating an optimal surface for mashing and a better filter bed for rinsing.
The removable grain hopper can hold up to 1 kg of grain at a time, and with 10 easily adjustable openings ranging from 0.8 mm to 2 mm, this mill is designed to handle different types of grain. Grind different base malts and special grains, and even change the speed at which your grain is ground with the variable speed knob.
The malt mill is easy to mount on a workbench or bucket, but works best with the included Grain Mill Bamboo Mounting Board. Moreover, the mill is easy to assemble thanks to its built-in motor and compact design. Simply attach the grain hopper. Set the desired opening by pulling the spring-loaded pin and turning the dial. Put the grain in the hopper and press the switch to start grinding.
Specifications:
Voltage: 220-240V
Power: 400W
Rollers: 58mm diameter, made of hardened stainless steel.
10 grinding positions from 0.8mm-2mm
Grinds 1.7kg of malt per minute
Hopper capacity: 1kg
The SF50 has a 50-litre capacity and is designed to hold up to 45 litres of wort. The SF50 can be adapted to your needs with an adjustable leg height and caster wheels for easy manoeuvrability. Its intuitive design, 304 stainless steel construction and 113° tapered design make both fermentation and cleaning easy. A perfect companion for smaller brewing systems such as the S40, G30 or G40 and the easybrew sb30p, Brewmonk or Brewster Beacon.
Specifications:
The SF50 is made of high-quality 304 stainless steel.
Adjustable leg height and comes with castors.
Easy yeast dumping with the dump valve.
Built-in thermowell.
Easy sampling with the sample valve placed above the yeast line.
Compatible with the Glycol Chiller Adapter Kit (GCA).
2-year warranty
Product Dimentions:
Size: 886x508mm (Legs at highest position)
Weight: 10 kg
Capacity: 50l (Max 45 litres of wort)
Conical angle: 113°
The Grainfather electric malt mill is motorised, compact and easy to use at home. It is equipped with large rollers that crack the outer shell of the grain lengthwise, creating an optimal surface for mashing and a better filter bed for rinsing.
The removable grain hopper can hold up to 1 kg of grain at a time, and with 10 easily adjustable openings ranging from 0.8 mm to 2 mm, this mill is designed to handle different types of grain. Grind different base malts and special grains, and even change the speed at which your grain is ground with the variable speed knob.
The malt mill is easy to mount on a workbench or bucket, but works best with the included Grain Mill Bamboo Mounting Board. Moreover, the mill is easy to assemble thanks to its built-in motor and compact design. Simply attach the grain hopper. Set the desired opening by pulling the spring-loaded pin and turning the dial. Put the grain in the hopper and press the switch to start grinding.
Specifications:
Voltage: 220-240V
Power: 400W
Rollers: 58mm diameter, made of hardened stainless steel.
10 grinding positions from 0.8mm-2mm
Grinds 1.7kg of malt per minute
Hopper capacity: 1kg
GCAST is a wireless bridging device that allows you to break free from Bluetooth limitations when brewing with the G30 and the Grainfather App.
GCAST allows you to break free from Bluetooth range limitations giving you more flexibility on your brew day. GCAST is a wireless device that bridges the connection between your G30 controller and the Grainfather App on your smartphone using your Wi-Fi network giving you a more reliable connection so you can brew with confidence.
Specifications:
More flexibility during brew days with a more reliable connection when brewing with the Grainfather App
Break free from Bluetooth® limitations using your home Wi-Fi network
Quick and easy to set up with no additional equipment to get started
Backed by a 3-year warranty
Included in the package:
Gcast
1m Micro USB cable (wall charger not included)
The Grainfather SF70 conical fermenter has been built to hold big batches of wort with a 70L capacity. Its sleek, stainless steel finish makes cleaning simple and with an intuitive design, you can easily adjust the height, take samples, and dump yeast to avoid the build-up of yeast and sediment.
Specifications:
304 Grade stainless steel body.
Conical angeled bottom to avoid sediment getting stuvk.
Adjustable Legs and castor wheels.
Thermowell for inserting temperature probes.
Seperate dump valve.
Sample valve above the trub line.
Compatible with the Glycol Chiller Accesory kit(GCA)
Two years warrenty.
Dimensions: 1300 x 410mm
Volume: 70L (Max Fermentation 65L)
The GCA is designed to expand on the capabilities of the Grainfather Glycol Chiller, by allowing almost any fermenter on the market to be connected, and temperature controlled - including most plastic bucket fermenters!
The Glycol Chiller Adapter works in a similar way to the Conical Fermenter Pro but instead of the built-in cooling sleeve and heating element, it uses a stainless steel cooling coil and a heating pad to control the temperature of almost any fermenter.
The cooling coil is connected to the Glycol Chiller and immersed in the fermenter. The heating pad is attached to the side of the fermenter using hook and loop tape. A temperature probe is also attached to the fermenter and the GCA will then regulate the cooling, or heating, as required.
The GCA connects to the Grainfather App so you can control your fermentation temperature on the go
The Grainfather Conical Fermenter Coat is the perfect fitment for those in a climate that experiences high condensation rates.
Specifications:
High quality, 5mm thick SBR foam
Whats included
Fermenter body coat
Conical cone coat
By upgrading your Grainfather G30 with the Rolled Plates Kit, there is no need for the silicone rings that come in the original packaging. The rolled-edges provide a better brewing experience by eliminating the need for a silicone ring on the grain plates, which allows the user to more easily insert the bottom grain plate and the top grain plates into the mash basket.
Kit Includes:
2 x Grainfather G30 Rolled Plates
Instructions:
Attach pipework to one of the G30 rolled plates (bottom plate) gently lower plate into the inner basket.
Continue brewing as per the G30 instructions. Use the second G30 rolled plate as a top plate to sit on top of the mash as you would with the original plate.
The Grainfather G40 brewing system has a bigger capacity and better connectivity. Produce up to 40L (11 US Gal) of beer from one brew. Connect your mobile device to the smart controller with built-in wireless control via the Grainfather App, for step-by-step brewing and access to 1000s of recipes.
Features:
Sleek 304 grade stainless steel body
Heats wort evenly with large, surface mounted heating elements
Connect your mobile device to the smart wireless controller via the Grainfather App and manage your brew remotely
Conical base for maximum wort transfer
Efficient and sanitary brew transfer with the counterflow wort chiller
PID heating control for accurate temperature management during mashing
Quick and easy cleaning with CIP (clean in place) capability
Integrated sight glass for easy volume reading
Rolled edge mash plate and large hop filter to reduce blockages
3-year warranty
Specifications:
BATCH VOLUME: 10-40L
GRAIN BILL: 3-12kg
WiFi control
Power: 3300W, 230V
Whats included:
Grainfather G40
Wi-Fi controller
Counterflow wort chiller
Glass lid
Lifting bar
Grain basket
Recirculation hose
Grain plate
Hop filter
Fittings
Built-in pump
Prevents particles from moving down the overflow pipe. For use with Grainfather Brewing Systems. Fits between the overflow inlet and the top mash plate.
Specifications:
Material: 304 stainless steel
Mesh: 600 micron mesh
Centre hole: 23 mm (0.9")
The Wortometer is a convenient accessory to your Grainfather Connect. Use in conjunction with the Grainfather Connect Control Box thermometer, for accurate control of your wort transfer temperature through the Grainfather Counter Flow Chiller.
Avoid long lag time and off flavours by using the Grainfather Wortometer. Adjust your wort and water flow rates from the Grainfather Counter Flow Chiller by dialling in the exact wort temperature your specific yeast requires. Requires a 8 mm inner diameter silicon hose, we recommend our 8 x 11mm silicone hose.
The Sparge Water Heater is a temperature controlled urn that allows you to heat up to 18 L of water. This makes the process easier, start heating your sparge water when you begin the mash to ensure it is ready for when you need to sparge. Once water is at required temperature, it will hold that temperature until changed or turned off.
The Sparge Water Heater features:
18 L Capacity
Stainless Steel Body
2 kw Element
Sight Glass (with 1 L graduations visible)
Tap Temperature Control
Heating Lights (to indicate input temperature has been reached or is still being heated)
NOTE: Graduations on the scale are measured from the tap.
For use with the G70 and G40 to allow quick drainage from the bottom of the unit. Made with high temperature resistant 304 grade stainless steel, the faucet’s operating temperature ranges from -10°C to 150°C.
Specifications:
1/2” ball valve
304 grade stainless steel faucet
Fits silicone hose 12x17 or Pvc hose 12x16
To keep the Grainfather Glycol Chiller operating at its best, we recommend replacing the glycol/water mixture every 6 months. Enough to completely refill the Glycol Chiller and connect up to 4 Conical Fermenters, this food grade propylene glycol will keep the chiller running at its best, providing you with efficient cooling for your fermenters.
Manage your fermentation temperature accurately, every time! Temperature control is one of the most crucial elements for producing a beer of good quality. It must be regulated throughout the fermentation process and be stable to ensure that the yeast does not get stressed and ferments properly to get the right taste profile. With the ability to individually control and regulate the temperature of up to four Grainer Conical yeast machines, each with their own yeast schedules, the Grainfather Glycol Chiller is the perfect complement to ensure superior fermentation results.
Design: With a slim and compact design, which is still suitable for our full range of functions, the Glycol chiller maintains the Grainfather principle of delivering high-quality home-brewery equipment, which delivers craft breweries such as results, with a small footprint. With the addition of the Glycol Chiller your system works at the ultimate level and you are even able to crash cold and lower to 4 ° C (39 ° F). The Glycol chiller is connected to a concealed cooler, located between the two stainless steel walls of the conical digester. . Your desired temperature is fed into the digital temperature controller on the conical digester, the liquid then flows through this sleeve and cools the stainless steel, which in turn cools the beer in the digester. The cooling sleeve never comes into contact with the beer, is completely hidden and does not need to be cleaned or disinfected. A real innovation for a fermenter on this scale.
Characteristics:
Allows you to cold-crash 23L (6 US Gal) wort to a temperature of 4-6ºC (39-43 ° F). The minimum temperature will vary based on external factors such as room temperature, the number of connected fermenters and other environmental conditions.
Cools up to 4 conical fermenters at different temperatures and fermentation schedules.
Includes a connection kit and propylene glycol to provide you with efficient cooling for your digester immediately.
Note:
The instructions for the Glycol Chiller are attached to the outside of the shipping box. It is important that you keep them, do not throw them away and read them carefully before use to ensure that no damage is caused to the device. If for any reason you are not included in your purchase, we strongly recommend downloading a new one.
Temperature control is one of the most crucial elements for producing a beer of good quality. It must be regulated throughout the fermentation process and be stable to ensure that the yeast does not get stressed and ferment in the right way to get the right flavor profile.
To cool off with the Grainfather Conical Fermenter, you must have the Conical Fermenter Temperature Controller. As soon as your target temperature is lower than the temperature of the wort in your digester, the cooling pump set pumps ice-cold water through the double-walled, insulated interior to cool your wort.
Simply connect the couplings and insulated hoses to the Conical Fermenter, immerse the submersible pump in a cool box with water (add ice for the desired temperature) and pump the liquid through the insulated cooling of the Conical Fermenter housing.
Keep your fermentation system running smoothly with this high-quality 2-meter replacement power cord, specifically designed for the Grainfather GF30 Conical Fermenter. Featuring an M12 connector, this cord securely links your GF30 unit to a power source, the Grainfather GC2/GC4, or the Cooling Pump Kit.
Reliable Connection – Ensures consistent power supply for efficient fermentationUniversal Fit – Compatible with all GF30 models and regional variationsEasy to Install – Plug-and-play design for quick replacement
Perfect for replacing a worn-out cable or keeping a spare on hand. Get your fermenter back up and running in no time!
Red and blue PVC hoses with black foam insulation.
These durable and insulated PVC hoses are specifically designed for use with the Grainfather GCA Glycol Chiller Adapter Kit or the Grainfather GF30 Conical Fermenter. They provide an excellent alternative to the cooling connection kit (10166) and ensure efficient and reliable temperature control during the fermentation process.
Key Features:
Material: High-quality PVC for long-lasting performance.
Insulation: Black foam covering to minimize heat loss.
Compatibility: Specifically designed for Grainfather fermenting and cooling systems.
Important Note:
These hoses do not include:
Self-sealing couplings
Seals for self-sealing couplings
These components must be purchased separately if required.
Upgrade your fermentation system with these practical and efficient cooling hoses!
If you have misplaced your grainstopper you can purchase this here.
A slight alteration was made on the top of the stopper but this doesn't affect the functionality of it.
Counterflow wort cooler
This counterflow wort cooler is suitable for the Grainfather Connect 30 litre.
However, it can also be used on other units.
With its copper inner coil, it cools your wort to <20 °C (depending on the cooling water temperature) within 20 minutes.
The hoses are included with the counterflow wort cooler.
Also included:
9mm right angle hose barb connector for G40, G70 and other brew systems
Tap adapter set for connection to garden hoses and most faucets
The G30ᵌ is an all-in-one brewing system with a 30 L (8 US Gal) capacity, designed to make up to 40 pints of high-quality beer from one brew. With Grainfather App integration, great features, and an intuitive design, it’s perfect for both beginner and experienced all grain brewers to master their all grain brewing journey.
Features:
Sleek 304 grade stainless steel body
Connect your mobile device to the Bluetooth controller via the Grainfather App and manage your brew remotely
Use with the GCAST Bluetooth Wi-Fi Bridge to bridge the connection between your G30 Controller and Grainfather App through Wi-Fi to give you more flexibility to move around during your brew day
A robust magnetic drive pump for maximum brewing efficiencies
Perforated grain basket negates the need for a top plate and no additional pipework needed
Efficient and sanitary brew transfer with the Counterflow Chiller
Compatible with the Still Spirits T500 Alembic Dome & Condenser
Backed by a 3-year warranty
Compatible with:
GF30 Conical Fermenter
GSERIES Glycol Chillers
GCAST Wireless Bridging Device
SF50 Conical Fermenter
GCA Glycol Chiller Adapter
Alembic Dome
Included in the box:
Grainfather G30ᵌ
Bluetooth controller
NEW Perforated grain basket
Grain plate
Lifting bar
Glass lid
Recirculation pipe
Filter
Hose fittings
Built-in pump
Be adviced: This version of the Grainfather G30 comes without counterflow chiller
Technical Dimensions:
Size: 685 x 386mm (27 x 15’’)
Weight: 14.6kg (32lb)
Max Preboil Volume: 30L (8 US Gal)
Batch Volume: Max: 25L (7 US Gal) | Min: 10L (3 US Gal)
Grain Bill: Max: 8kg (18lb)* | Min: 1.5kg (11lb) *9kg (20lb) with top plate
Power: NZ, AU, EU, UK,: 2000W, 220V
Connectivity: Bluetooth control
Keeping your brewing equipment clean in between brews is important to avoid any extra cleaning time on brew day. So we thought that a custom made bag will be the perfect accessory for the Grainfather.The bag is made from robust and tough, nylon material that will keep the Grainfather free from both dust, contaminants and exterior moisture. Simply place the bag on the floor, sit the base of the Grainfather on the bottom of the bag and roll it up over the Grainfather. The excess material rolls up and then clips together for a tight seal, keeping the Grainfather clean and safe until your next brew. Height – 100 cm (39”) Diameter – 45 cm (17”) Material – Synthetic
With this Grainfather Deluxe Bundle, you get everything you need to produce high-quality, bottom-fermented beers!In addition to the high-quality Grainfather G30v3 brewing kettle, the bundle also includes a 30 litre conical stainless steel fermentation vat with automatic temperature display. This allows you to monitor fermentation precisely and harvest your own yeast. Cool your fermenting beer with the Grainfather glycol cooler, which can cool up to 2 fermentation vats at the same time. So nothing stands in the way of your own pilsner or lager! A high quality malt mill with 10 grist grades is also included for conveniently grinding your own malt. Check the saccharification of your brew with the iodine solution and clean your equipment with the powerful Grainfather Performance Cleaner. With the included brewing pack with hops, yeast, malt and a recipe, you can get started right away!Included in the bundle are• Grainfather G30v3 automatic brewing kettle• Grainfather GF30 conical fermenter pro• Grainfather GC2 glycol cooler• High Quality malt mill• Grainfather Performance Cleaner• Saccharification test iodine solution• 2x brewing package raw materials (free choice)
With this Grainfather Original Bundle, you get everything you need to make high-quality beers!In addition to the high-quality Grainfather G30v3 brewing kettle, the bundle also includes a 30 litre conical stainless steel fermentation vat with automatic temperature display. This enables precise monitoring of fermentation and harvesting of your own yeast. To grind your own malt, a deluxe malt mill with 2 stainless steel rollers is also included. Check the saccharification of your brew with the iodine solution and clean your equipment with the powerful Grainfather Performance Cleaner. With the included brewing pack with hops, yeast, malt and a recipe, you can get started right away!Included in the bundle are• Grainfather G30v3 automatic brewing kettle• Grainfather GF30 conical fermenter pro• Grainfather Performance Cleaner• Deluxe malt mill with 2 stainless steel rollers• Saccharification test iodine solution• Brewing package raw materials (free choice)
With this Basic Bundle you get everything you need for brewing with the Grainfather automatic brewing system!In addition to the high-quality Grainfather G30v3 brewing kettle, the bundle includes a fermentation vat with fermentation bung and drain tap from the renowned brewery brand Speidel. A premium cast iron malt mill is also included to grind your own malt. A filling tube, a measuring cylinder with hydrometer and the Grainfather Performance Cleaner help to make the brewing day stress-free. With the included brewing pack with hops, yeast, malt and a recipe, you can get started right away!Included in the bundle are• Grainfather G30v3 brewing system• Speidel 30 litre fermentation vat with fermentation bung and drain tap• Hydrometer & measuring cylinder• Bottlefiller Medium• Grainfather Performance Cleaner• Premium cast iron malt mill• Brewing package raw materials (free choice)
The Grainfather Conical Fermenter Basic Cooling Edition includes the Conical Fermenter and Cooling Pump Kit.
This allows you to control the heating of your unit and cooling via the Cooling Pump Kit, dump yeast, take samples and transfer your wort via our innovative dual function valve design.
What's included:
Conical Fermenter
Fermenter LidRubber BungBubbler AirlockCone PlugCone Plug Seal5 cm (2") Tri ClampDigital Temperature DisplayPower Adapter and Wall Plug2 m (6.5 ft) M12 3-Pin Power CordDual Valve TapDigital Temperature ControllerCooling pump kitSpecifications:
304 Stainless Steel Body (polished inner and brushed outer)30 L (8 US Gal) capacity (volume markings on inner body up to 25 L (7 US Gal)30 W, 12 V heating power3.8 cm (1.5") ferrule on lid (for pressure transfer attachments)5 cm (2") ferrule on bottom of coneDual Valve Tap with 110 mm (4.3”) inletDimensions of Conical Fermenter:Diameter with handles: 360 mm
Height (without airlock): 910 mm
Height with bubbler airlock: 1090 mm