Grainfather G30 Connect - Accessory Kit

New

Grainfather GCast

GCAST is a wireless bridging device that allows you to break free from Bluetooth limitations when brewing with the G30 and the Grainfather App. GCAST allows you to break free from Bluetooth range limitations giving you more flexibility on your brew day. GCAST is a wireless device that bridges the connection between your G30 controller and the Grainfather App on your smartphone using your Wi-Fi network giving you a more reliable connection so you can brew with confidence. Specifications: More flexibility during brew days with a more reliable connection when brewing with the Grainfather App Break free from Bluetooth® limitations using your home Wi-Fi network Quick and easy to set up with no additional equipment to get started Backed by a 3-year warranty Included in the package: Gcast 1m Micro USB cable (wall charger not included)

€59.95*

few Available

7 %

New

Grainfather SF70 Fermenter

The Grainfather SF70 conical fermenter has been built to hold big batches of wort with a 70L capacity. Its sleek, stainless steel finish makes cleaning simple and with an intuitive design, you can easily adjust the height, take samples, and dump yeast to avoid the build-up of yeast and sediment. Specifications: 304 Grade stainless steel body. Conical angeled bottom to avoid sediment getting stuvk. Adjustable Legs and castor wheels. Thermowell for inserting temperature probes. Seperate dump valve. Sample valve above the trub line. Compatible with the Glycol Chiller Accesory kit(GCA) Two years warrenty. Dimensions: 1300 x 410mm Volume: 70L (Max Fermentation 65L)

€495.00* €535.00*

few Available

New

Grainfather Glycol Chiller Adapter Kit (GCA)

The GCA is designed to expand on the capabilities of the Grainfather Glycol Chiller, by allowing almost any fermenter on the market to be connected, and temperature controlled - including most plastic bucket fermenters! The Glycol Chiller Adapter works in a similar way to the Conical Fermenter Pro but instead of the built-in cooling sleeve and heating element, it uses a stainless steel cooling coil and a heating pad to control the temperature of almost any fermenter. The cooling coil is connected to the Glycol Chiller and immersed in the fermenter. The heating pad is attached to the side of the fermenter using hook and loop tape. A temperature probe is also attached to the fermenter and the GCA will then regulate the cooling, or heating, as required. The GCA connects to the Grainfather App so you can control your fermentation temperature on the go.

€195.00*

few Available

Tip

New

Grainfather G30 Connect - Accessory Kit

This accessory kit contains 5 items that are commonly used with the Grainfather G30. The pack contains: Stainless steel paddle (60cm) Overflow filter Micro Pipework Wortometer Grainfather Performance Cleaner (500 gr)

€99.95*

Available

Grainfather GF30 Fermenter coat

The Grainfather Conical Fermenter Coat is the perfect fitment for those in a climate that experiences high condensation rates. Specifications: High quality, 5mm thick SBR foam Whats included Fermenter body coat Conical cone coat

€34.75*

few Available

Grainfather G30 Rolled Plates Kit

By upgrading your Grainfather G30 with the Rolled Plates Kit, there is no need for the silicone rings that come in the original packaging. The rolled-edges provide a better brewing experience by eliminating the need for a silicone ring on the grain plates, which allows the user to more easily insert the bottom grain plate and the top grain plates into the mash basket. Kit Includes: 2 x Grainfather G30 Rolled Plates Instructions: Attach pipework to one of the G30 rolled plates (bottom plate) gently lower plate into the inner basket. Continue brewing as per the G30 instructions. Use the second G30 rolled plate as a top plate to sit on top of the mash as you would with the original plate.

€68.75*

few Available

Grainfather Overflow Filter

Prevents particles from moving down the overflow pipe. For use with Grainfather Brewing Systems. Fits between the overflow inlet and the top mash plate. Specifications: Material: 304 stainless steel Mesh: 600 micron mesh Centre hole: 23 mm (0.9")

€19.95*

Available

11 %

Tip

Grainfather S40 brewing system

The Grainfather S40 brewing system has a 46L capacity, allowing you to create 40L of your own beer every time that you brew. This product has a high grade stainless steel build and is packed full of features to make every brew easy. Features: 304 grade stainless steel body Easily manage heating using the digital controller with colour display Built in pump for maximum brewing efficiencies Easily cool wort with the stainless steel immersion chiller Recirculation arm for more efficient mashing 2-year warranty Whats included: Grainfather S40 Grain basket Lid Immersion chiller, hoses connection fittings Recirculation arm wort sprayer Built-in pump

€489.95* €549.00*

Available

Graincoat Insulation Jacket for Grainfather G30

This heat insulation jacket is designed to be used with the Grainfather G30 to keep heat contained in the boiler and maintain a constant temperature during your brew. Material: SBR (Styrene-Butadiene Rubber) foam Thickness: 11 mm Easy to wipe clean, polyurethane outer layer and machine washable.

€49.95*

few Available

Grainfather Glycol Chiller

Manage your fermentation temperature accurately, every time! Temperature control is one of the most crucial elements for producing a beer of good quality. It must be regulated throughout the fermentation process and be stable to ensure that the yeast does not get stressed and ferments properly to get the right taste profile. With the ability to individually control and regulate the temperature of up to four Grainer Conical yeast machines, each with their own yeast schedules, the Grainfather Glycol Chiller is the perfect complement to ensure superior fermentation results. Design: With a slim and compact design, which is still suitable for our full range of functions, the Glycol chiller maintains the Grainfather principle of delivering high-quality home-brewery equipment, which delivers craft breweries such as results, with a small footprint. With the addition of the Glycol Chiller your system works at the ultimate level and you are even able to crash cold and lower to 4 ° C (39 ° F). The Glycol chiller is connected to a concealed cooler, located between the two stainless steel walls of the conical digester. . Your desired temperature is fed into the digital temperature controller on the conical digester, the liquid then flows through this sleeve and cools the stainless steel, which in turn cools the beer in the digester. The cooling sleeve never comes into contact with the beer, is completely hidden and does not need to be cleaned or disinfected. A real innovation for a fermenter on this scale. Characteristics: Allows you to cold-crash 23L (6 US Gal) wort to a temperature of 4-6ºC (39-43 ° F). The minimum temperature will vary based on external factors such as room temperature, the number of connected fermenters and other environmental conditions. Cools up to 4 conical fermenters at different temperatures and fermentation schedules. Includes Conical Fermenter Coat and propylene glycol to provide you with efficient cooling for your digester immediately. Note: The instructions for the Glycol Chiller are attached to the outside of the shipping box. It is important that you keep them, do not throw them away and read them carefully before use to ensure that no damage is caused to the device. If for any reason you are not included in your purchase, we strongly recommend downloading a new one.

€939.00*

few Available

Grainfather New Pump Filter incl cap/insert

€19.95*

Available

Grainfather Sparge Water Heater 40L

The Sparge Water Heater 40 L is designed to be used with up to 70 L brewing systems. It reduces the time and effort of heating additional sparge water during your brew, making your large or small brew days even easier.The Sparge Water Heater allows you to heat up to 40 L (10.5 US Gal) of water in preparation to sparge. Simply start heating your sparge water when you begin the mash, to ensure that it is ready when you need to sparge. Add the right amount of water according to your recipe, set the desired temperature and once the water has reached the required temperature, it will hold that temperature until you need it.

€199.00*

few Available

Grainfather Stainless Steel Fermenter with Spigot - 25 litres

Professional Stainless Steel Fermenter with Spigot. Volume: 25 L High grade #304, scratch resistant, stainless steel body Handles for easy lifting of the fermenter Seamless inside finish for easy cleaning to prevent contamination Litre measurement stamped on the inside body of fermenter Includes bung and bubbler airlock Height = 520mm (to top of lid) Height = 620mm (including vintage airlock) Height = 480mm (to top edge without lid)

€144.95*

few Available

Grainfather GF30 Fermenter Basic Cooling Edition EU

The Grainfather Conical Fermenter Basic Cooling Edition includes the Conical Fermenter and Cooling Pump Kit. This allows you to control the heating of your unit and cooling via the Cooling Pump Kit, dump yeast, take samples and transfer your wort via our innovative dual function valve design. What's included: Conical Fermenter Fermenter LidRubber BungBubbler AirlockCone PlugCone Plug Seal5 cm (2") Tri ClampDigital Temperature DisplayPower Adapter and Wall Plug2 m (6.5 ft) M12 3-Pin Power CordDual Valve TapDigital Temperature ControllerSpecifications: 304 Stainless Steel Body (polished inner and brushed outer)30 L (8 US Gal) capacity (volume markings on inner body up to 25 L (7 US Gal)30 W, 12 V heating power3.8 cm (1.5") ferrule on lid (for pressure transfer attachments)5 cm (2") ferrule on bottom of coneDual Valve Tap with 110 mm (4.3”) inletDimensions of Conical Fermenter:Diameter with handles: 360 mm Height (without airlock): 910 mm Height with bubbler airlock: 1090 mm

€559.00*

Available

Grainfather Brew Bottler

€4.95*

few Available

Grainfather Overflow Inlet

€16.95*

Available

Grainfather G70 Brew kettle

The Grainfather G70: bigger and even better! You need more capacity than the Grainfather Connect? Us the all new Grainfather G70! Mashing, sparging, boiling and chilling in one device, Grainfather quality with app integration and smart brewing technology. Ideal for consistent and reliable brewing.Features:capacity 70 litre (for 65litre recipes, minimum recipe size 40 litres)smart control with built-in wireless connectivity and mobile app integration for step-by-step remote controlled brewingaccess to brewing tools, recipes and calculatorsmax. grain bill: 17 kgconical base for maximum brewhouse efficiencyPID heating control: large conical heating element for efficient heatingCIP capability, including cleaning filterlarge counterflow wort chiller, including more powerful pumprolled edge mash plates: no silicone sealslarge dual-stage hop filter: hopping rate of up to 1.5 kgintegrated sight glass for easy volume readings; replace with the sight glass cleaning barb to easily recirculate a cleaning solutionmash recirculation hose and barb: easy to install and remove for efficient mashing3 year warrantyTechnical data: EU model.body: stainless steel 304 220-240 V, 3300 W (heating element 3150 W)Weight machine : 36,5 kgSize machine: 83 cm x 53 cmMash Tun Dead Space Volume: 6,8LBoil-Off rate: 4L / hour

€1,649.00*

few Available

Grainfather Top Overflow Pipe

€16.95*

Available

Grainfather conical fermenter cooling pump kit

Temperature control is one of the most crucial elements for producing a beer of good quality. It must be regulated throughout the fermentation process and be stable to ensure that the yeast does not get stressed and ferment in the right way to get the right flavor profile. To cool off with the Grainfather Conical Fermenter, you must have the Conical Fermenter Temperature Controller. As soon as your target temperature is lower than the temperature of the wort in your digester, the cooling pump set pumps ice-cold water through the double-walled, insulated interior to cool your wort. Simply connect the couplings and insulated hoses to the Conical Fermenter, immerse the submersible pump in a cool box with water (add ice for the desired temperature) and pump the liquid through the insulated cooling of the Conical Fermenter housing.

€69.95*

Available

Grainfather Inner Basket Lifting Handle

€19.95*

few Available

Grainfather G30 Connect Brewing system

The Grainfather G30 is a multi-award-winning, 30L brewing system that is designed to make up to 23L of beer from one brew. With app integration, innovative features, and an intuitive design, it’s perfect for both beginner and experienced homebrewers. Features Sleek 304 grade stainless steel body Connect your mobile device to the Bluetooth controller via the Grainfather App and manage your brew remotely A robust magnetic drive pump for maximum brewing efficiencies An extendable grain basket that is designed to hold different weights of grain Efficient and sanitary brew transfer with the counterflow wort chiller Clips to easily attach the G30 Alembic Dome accessory, allowing you to convert your G30 into a microdistillery Backed by a 3-year warranty Whats included Grainfather G30 Bluetooth controller Counterflow wort chiller Grain basket Overflow pipework Bottom & top grain plates Lifting bar Grain stopper Glass lid Recirculation pipe Filter Hose fittings Built-in pump Specifications SIZE: 733 x 386mm WEIGHT: 17kg MAX PREBOIL VOLUME: 30L BATCH VOLUME: Max: 25L GRAIN BILL: Max: 9kg Min: 5kg POWER: 2000W, 230V CONNECTIVITY: Bluetooth control

€795.00*

few Available

Grainfather Whirlpool-Paddle

€29.95*

Available

Grainfather GF30 Fermenter Controller

Control the heating and cooling (when used with the glycol chiller) of your fermenter remotely with the Conical Fermenter Pro Controller.

€109.95*

few Available

Grainfather Grain Stopper for G30 & G70

If you have misplaced your grainstopper you can purchase this here. A slight alteration was made on the top of the stopper but this doesn't affect the functionality of it.

€11.95*

Available

Grainfather 10 L Micro Pipework

Perfect for small batch brewing, where you can test different beer styles or recipes and have more varieties of beer on the go. The Micro Pipework is perfect for brewing 10 L beers, or standard batches of a lower ABV beer with a small grain bill.

€29.95*

few Available

Grainfather Wortometer

The Wortometer is a convenient accessory to your Grainfather Connect. Use in conjunction with the Grainfather Connect Control Box thermometer, for accurate control of your wort transfer temperature through the Grainfather Counter Flow Chiller. Avoid long lag time and off flavours by using the Grainfather Wortometer. Adjust your wort and water flow rates from the Grainfather Counter Flow Chiller by dialling in the exact wort temperature your specific yeast requires. Requires a 8 mm inner diameter silicon hose, we recommend our 8 x 11mm silicone hose.

€20.95*

Available

Grainfather Sparge/Spoel water heater EU 18 Liters

The Sparge Water Heater is a temperature controlled urn that allows you to heat up to 18 L of water. This makes the process easier, start heating your sparge water when you begin the mash to ensure it is ready for when you need to sparge. Once water is at required temperature, it will hold that temperature until changed or turned off. The Sparge Water Heater features: 18 L Capacity Stainless Steel Body 2 kw Element Sight Glass (with 1 L graduations visible) Tap Temperature Control Heating Lights (to indicate input temperature has been reached or is still being heated) NOTE: Graduations on the scale are measured from the tap.

€114.95*

few Available

Grainfather Conical Fermenter KIT met chille

Grainfather Conical Fermenter KIT met chiller

€1,399.00*

few Available

Grainfather G30 Connect - Accessory Kit

Login