Semi-transparent bucket made from foodgrade HDPE. Lid Included.
Volume 25 litres
Complete with Handle
Lid with guarantee closure
Graduation
Natural Colour / semi transparent
Size: height 35 cm Ø 35 cm
Important: Bucket is without spigot.
Lockable jerrycan with cap.
Content 5 liter. (on the right in picture)
Synthetic H.D.P.E.
Tip: By drilling a hole of 16 mm into the cap and putting in a rubber ring, any waterlock will fit into the jerrycan.
Lockable jerrycan with guarantee closing.
Content 5 liter.
Stackable
Synthetic H.D.P.E.
Tip: By drilling a hole of 16 mm into the cap and putting in a rubber ring, any waterlock will fit into the jerrycan.
Lockable jerrycan with guarantee closing.
Content 10 liter.
Synthetic H.D.P.E.
Tip: By drilling a hole of 16 mm into the cap and putting in a rubber ring, any waterlock will fit into the jerrycan.
Bottle, brown glass content 50 ml. (combi-flask) Incl. small cap (guarantee closing).
Neck diameter 18 mm
Bottle height 95 mm
Diameter 40 mm.
Full box= 49 pc.
Lockable jerrycan with guarantee closing.
Content 2 liter. (on the left in picture)
Synthetic H.D.P.E.
Tip: By drilling a hole of 16 mm into the cap and putting in a rubber ring, any airlock will fit into the jerrycan.
Brewing bucket semi transparent for pulp and main fermentation complete with:
Lid
Size distribution
Handle
Tap
Airlock
Connection for the water seal by means of a 100% silicone plug
Especially suitable for foodstuffs.
Ideal for pulp and main fermentation.
Measurements: height 27.5 cm Ø 27.5 cm
Content 12 Litres.
Before use:
Mount the tap in the bucket with the white ring on the outside. Hold the white part on the outside of the tap and carefully tighten the nut on the inside. Over tightening causes leakage.
Place the bucket on the edge of the table and fill it with 5 Litres of water to test for leaks before use.
The temperature of the liquid in the brewing bucket most never exceed 65 ° C.
Prevent damage from scratching the plastic to prevent unwanted bacteria.
Brew buckets are ideally suited for the 1st or main fermentation because there is sufficient CO2 above the liquid.
Always use a fermentation vessel with rubber ring for 100% sealing, or a glass bottle with stopper and airlock.
Thousand empty gelatin capsules (250-300 mg) that allow you to create your own energy-, or herbal capsules.
Perfect in combination with the Capsule Machine no 1.
Professional extra thick plastic bucket, with spout and handle, ideal for cleaning!Resistant to hot liquidsExtra thick plasticFoodgrade materialWith spoutContent 9 litres
A sachet of desiccant added that is meant to keep gelatin capsules moisture free. Take the desiccant bag from the plastic and put it into the same airtight container as the gelatin capsules. The pouch desiccant is not meant for consumption!
'Semi-transparent bucket made from foodgrade HDPE. Contains of a lid (with pre-drilled hole), volume indicator, handle, spigot, airlock and silicone plug for airlock.
Perfect as fermenter or bottling bucket.
Volume: 25 litresWidth with lid : 38cm
Height with lid : 36cm
Diameter : 38 cm
Important: Mount the rubber ring of the spigot on the outside of the bucket. Tighten the nut on the inside carefully. Overtightening can cause leakage!
Empty capsules (500 mg) that allow you to create your own energy-, or relax-capsules.Perfect in combination with the Capsule Machine.Opt for capsules made of gelatin or for vegetable-based. The vegetarian capsules are also kosher and suitable for vegans.
Thousand empty vegetarian capsules (250-300 mg) that allow you to create your own energy-, or herbal capsules.
Perfect in combination with the Capsule Machine no. 1
The vegetarian capsules are also kosher and suitable for vegans.
Medicine bottle brown 500 ml uncapped. With mark, packed dust-free and germ-free on trays, comes with black cap.
Neck diameter 28 mm
Diameter 80 mm
Height 161 mm