Mangrove Jack's Stainless Steel Fermenter with Spigot - 25 litres
Skip image gallery
Sold out
Not on stock
Product number:
5010830
Manufacturer:
Mangrove Jack's
Product information "Mangrove Jack's Stainless Steel Fermenter with Spigot - 25 litres"
Professional Stainless Steel Fermenter with Spigot.
- Volume: 25 L
- High grade #304, scratch resistant, stainless steel body
- Handles for easy lifting of the fermenter
- Seamless inside finish for easy cleaning to prevent contamination
- Litre measurement stamped on the inside body of fermenter
- Includes bung and bubbler airlock
Height = 520mm (to top of lid) Height = 620mm (including vintage airlock) Height = 480mm (to top edge without lid)
Manufacturer "Mangrove Jack's"
Mangrove Jack's, Bevie Handcraft NZ Limited
328 Rosedale Road,
Albany, Auckland 0632, New Zealand
info@mangrovejacks.com
+44 1756 802031
Login
Skip product gallery
Alternatives
%
Grainfather Fermentation Thermometer
A simple analogue thermometer to measure the temperature of wort during fermentation. Can be used with the Grainfather SF70 or the Grainfather Thermowell.
Bucket Semi-Transparent with Lid 5 litres
Semi-transparent bucket made from foodgrade HDPE. Lid Included.
Volume 5 litres
Complete with Handle
Lid with guarantee closure
Graduation
Natural Colour / semi transparent
Size: height 18,7 cm Ø 23,8 cm
Important: Bucket is without spigot.
Brewing Bucket Semi-Transparent Complete - 5 litres
Semi-transparent bucket made from foodgrade HDPE. Contains of a lid (with pre-drilled hole), volume indicator, handle, spigot, airlock and silicone plug for airlock.
Perfect as fermenter or bottling bucket.
Volume: 5 litresWidth with lid : 23,8 cm
Height with lid : 18,7cm
Diameter : 23,8 cm
Important: Mount the rubber ring of the spigot on the outside of the bucket. Tighten the nut on the inside carefully. Overtightening can cause leakage!
%
Jacket for Apollo 60l Unitank
This Jacket from Keg King fits the Apollo 60L Unitank. The Jacket will help control the temprature when fermenting. Especially helpfull when doing tempreture controlled fermentation.
Easybrew Chiller for 60L Bucket
The Easybrew Chillercoil is one of those tools that can help you brew better beers.
The Chillercoil allows you to control the fermentation temperature of your wort.
Specifications:
Material: 304 stainless steel
Coil Length: 13m.
Hole for airlock.
%
Insulation Jacket for FB30 Fermenter
The Easybrew insulation jacket is a handy accessory for those cold winter days. It will help you to keep the temperature in your fermenter during colder days to prevent your fermentation from stalling.
%
Easybrew Chillercoil for 30L bucket
The Easybrew Chillercoil is one of those tools that can help you brew better beers.
The Chillercoil allows you to control the fermentation temperature of your wort.
Specifications:
Material: 304 stainless steel
Coil Length: 4.7m.
Hole for airlock.
Keg King Chubby 30 L Pressure Fermenter
The 'Chubby' is a 30 L pressure fermenter from Keg King - the next step up from the Fermenter King Junior. At 30 L in volume, this pressure fermenter is designed for full batches, and fits perfectly in a fermentation chamber. Made from clear, high-quality PET, you can enjoy all the advantages of pressure fermentation for batches 23-25 L, with plenty of headspace.
The Chubby lid features a gas and liquid post, as well as a PRV port, meaning gas and liquid are easily controlled for transfers, fermentation pressure and serving.
Brewers can extract bright, clear beer after fermentation by way of the floating diptubes that come standard with each Chubby fermenter. It also comes with stainless steel handles for easy transportation and the super smooth interiors make it easy to remove fermentation debris, making clean up simple.
Dimensions:
Height: 595mm
Width: 300mm
%
Spunding Valve with Pressure Gauge 1.5" Tri Clamp
High-quality stainless steel Spunding valve with integrated pressure gauge. The spunding valve is fitted with Tri-clamp couplings which makes cleaning and fitting a breeze. Easily adjustable and fully demountable.
Specifications:
Material: stainless steel 304
1.5" TC coupling.
Adjustable from 0.2-2.2 Bar.
Easy to clean.
Note: Use Spunding valve only on suitable pressure tanks.
Speidel 3/4" Stainless Steel Ball Valve for FD Tanks
Speidel 3/4 "stainless steel ball valve for FD tanks.
Male connector - Female connector 3/4 ", V2
Keg King Junior and Chubby replacement lid
Top Lid Replacement for Junior and Chubby Fermenters.This top lid replacement will require the neck o-ring, PRV (pressure relief valve), gas and liquid posts, dip tupe, silicone pick up tube and float from your existing fermenter.
%
FermZilla - Tri-Conical - 55L - Starter Kit with handle Gen3
The Gen3 FermZilla Tri-Conical is a game-changer for homebrewers, featuring a 3-inch Tri-Clover ferrule, a 600mL collection container, and easy-to-use Tri-Clover connections. Designed based on customer feedback, it offers simpler, more sanitary design and effortless disassembly.Key Features:3-inch Tri-Clover ferrule and butterfly valve for easy cleaning600mL collection container with Tri-Clover connectionFerment under pressure up to 2.4 barTransparent design to monitor fermentationStarter Kit Includes:55L Tri-Conical tank with metal neck ring Standard top lid with PRV (35psi) and accessory ports 600mL collection container & lid, Tri-Clover clamps, and more The new Gen3 model is easier to clean and assemble than its predecessor, making it perfect for brewers at all levels.Dimensions:Height - 1055 mmHeight with airlock - 1146 mm Width - 388 mmCircumference - 354 mm
Brewing Bucket Semi-Transparent Complete - 25 litres
'Semi-transparent bucket made from foodgrade HDPE. Contains of a lid (with pre-drilled hole), volume indicator, handle, spigot, airlock and silicone plug for airlock.
Perfect as fermenter or bottling bucket.
Volume: 25 litresWidth with lid : 38cm
Height with lid : 36cm
Diameter : 38 cm
Important: Mount the rubber ring of the spigot on the outside of the bucket. Tighten the nut on the inside carefully. Overtightening can cause leakage!
%
Fastferment™ Collection ball for 14G
Rubber bung and teflon tape included.Used for harvesting and staring yeast.Volume: 1200 ml.
Mobile bottom for the Small Speidel Models
Mobile bottom for the FD Fermenter 60 and 120 Litres. Height: 15 cm, on wheels.
%
FastFerment™ stand extension kit
These Leg Extensions allow you to extend the Stand for the 14G FastFerment™. This way a Keg can be fitted under the FastFerment™ for easy filling.50,8 cm in length12 mm Diameter Legs and 14 mm diameter RingWorks for 14G (53L) versionsHeight from Ground to Airlock - 156.7 cm Height from Ground to Top of Lid - 147.8 cmTotal Clearance from Valve to Ground for Kegging 66 cm
%
Fastferment™ Mason Jar adaptor kit
Adaptor to Fit Mason Jars for the FastFerment™ 7.9G. Works for 95% of Wide Mouth Mason Jars. Food Grade Plastic. Includes gasket.To collect and reuse yeastUse big or small mason jars for yeast/trub collection
%
FastFerment™ carrying strap
This sturdy carrying strap, made for polypropylene, is ideal for transporting your FasFerment™ 7.9G in a comfortable way.
Bottle filler for tap Large
Bottle full? This bottel filler stops automatically when you remove the beer bottle.Fits on the drain valve for barrels of 30-60 liter and Braumarkt brew bucketsLength: 40 cmFills the liquid along the bottom so minimal oxidationDoes not fit on the valves of Speidel Barrels!
Insulation Jacket for FB60 Fermenter
The Easybrew insulation jacket is a handy accessory for those cold winter days. It will help you to keep the temperature in your fermenter during colder days to prevent your fermentation from stalling.
Brew Bucket Semi Transparent 12 Litres incl. Lid
Brewing bucket semi transparent for pulp and main fermentation complete with:
Lid
Size distribution
Handle
Tap
Airlock
Connection for the water seal by means of a 100% silicone plug
Especially suitable for foodstuffs.
Ideal for pulp and main fermentation.
Measurements: height 27.5 cm Ø 27.5 cm
Content 12 Litres.
Before use:
Mount the tap in the bucket with the white ring on the outside. Hold the white part on the outside of the tap and carefully tighten the nut on the inside. Over tightening causes leakage.
Place the bucket on the edge of the table and fill it with 5 Litres of water to test for leaks before use.
The temperature of the liquid in the brewing bucket most never exceed 65 ° C.
Prevent damage from scratching the plastic to prevent unwanted bacteria.
Brew buckets are ideally suited for the 1st or main fermentation because there is sufficient CO2 above the liquid.
Always use a fermentation vessel with rubber ring for 100% sealing, or a glass bottle with stopper and airlock.
Skip product gallery
Grainfather Products
Grainfather G30v3 Perforated Basket & Rolled Plate
A redesigned perforated grain basket for the G30 Brewing System which removes the need for a top plate and additional pipework. This basket comes as a standard with the G30v3 but can be purchased as an upgrade for previous versions of the G30 Brewing System
Packaging Content:
1 x G30v3 Perforated Basket
Bottom Grain Plate
Silicone Recirculation Hose
%
Grainfather Fermentation Thermometer
A simple analogue thermometer to measure the temperature of wort during fermentation. Can be used with the Grainfather SF70 or the Grainfather Thermowell.
Grainfather G30 Hop Plate
Enhance Your Grainfather G30 Brewing System with the G30 Hop Plate
Take your brewing experience to the next level with the G30 Hop Plate, a dedicated false bottom style hop plate filter designed for use with all G30 Brewing Systems. By incorporating this innovative accessory alongside your G30 system's existing filter, you'll achieve increased efficiency in hop filtration.
How to use:
Install the G30 Filter (this is the hop filter included with the G30) as per the instructions included with the G30 Brewing System.
Install the G30 Hop Plate by placing the plate feet down into the boiler over the top of the G30 filter, so the feet of the hop plate rest flat on the base of the boiler.
Kdey Features:
Premium 304 Grade Stainless Steel: Crafted from sleek and durable 304 grade stainless steel, ensuring longevity and quality.
Ease of Maintenance: The G30 Hop Plate is designed for easy cleaning, simplifying your brewing process.
Full Body False Bottom Style Filter: This filter design ensures even better hop filtration, enhancing the clarity and quality of your brew.
Tailored for G30 Brewing System: The G30 Hop Plate is purpose-built for the G30 Brewing System, ensuring a seamless fit and maximum performance.
Important Notes:
Please be aware that some users may notice a slight reduction in boil vigour and a minor increase in heating time.
Exercise caution when dealing with post-boil hop matter, as it retains heat. Always use thermally insulated gloves when removing the hop plate post-boil.
Upgrade your Grainfather G30 Brewing System and experience superior hop filtration with the G30 Hop Plate. Elevate the quality of your brews, ensuring they meet your exacting standards.
Grainfather G70v2 Perforated Basket & Rolled Plate
A redesigned perforated grain basket for the G70 Brewing System which removes the need for a top plate and additional pipework. This basket comes as standard with the G70v2 but can be purchased as an upgrade for previous versions of the G70 Brewing System.
Contents:
1x G70 Perforated Basket
Grain Plate
Rexirculation Barb & Hose
Specifications:
Grain capacity: Up to 16 Kg
Maximum Batch size: 60 L
304 Stainless Steel
%
Grainfather G30v3 Automatic Brewkettle
The G30ᵌ is an all-in-one brewing system with a 30 L (8 US Gal) capacity, designed to make up to 40 pints of high-quality beer from one brew. With Grainfather App integration, great features, and an intuitive design, it’s perfect for both beginner and experienced all grain brewers to master their all grain brewing journey.
Features:
Sleek 304 grade stainless steel body
Connect your mobile device to the Bluetooth controller via the Grainfather App and manage your brew remotely
Use with the GCAST Bluetooth Wi-Fi Bridge to bridge the connection between your G30 Controller and Grainfather App through Wi-Fi to give you more flexibility to move around during your brew day
A robust magnetic drive pump for maximum brewing efficiencies
Perforated grain basket negates the need for a top plate and no additional pipework needed
Efficient and sanitary brew transfer with the Counterflow Chiller
Compatible with the Still Spirits T500 Alembic Dome & Condenser
Backed by a 3-year warranty
Compatible with:
GF30 Conical Fermenter
GSERIES Glycol Chillers
GCAST Wireless Bridging Device
SF50 Conical Fermenter
GCA Glycol Chiller Adapter
Alembic Dome
Included in the box:
Grainfather G30ᵌ
Bluetooth controller
Counterflow Chiller
NEW Perforated grain basket
Grain plate
Lifting bar
Glass lid
Recirculation pipe
Filter
Hose fittings
Built-in pump
Technical >Dimensions:
Size: 685 x 386mm (27 x 15’’)
Weight: 14.6kg (32lb)
Max Preboil Volume: 30L (8 US Gal)
Batch Volume: Max: 25L (7 US Gal) | Min: 10L (3 US Gal)
Grain Bill: Max: 8kg (18lb)* | Min: 1.5kg (11lb) *9kg (20lb) with top plate
Power: NZ, AU, EU, UK,: 2000W, 220V
Connectivity: Bluetooth control
%
Grainfather G70v2 Automatic Brewkettle
The Grainfather G70: bigger and even better! You need more capacity than the Grainfather Connect? Us the all new Grainfather G70! Mashing, sparging, boiling and chilling in one device, Grainfather quality with app integration and smart brewing technology. Ideal for consistent and reliable brewing.
New:
Perforated grain basket for an improved brewing experience with no top plate or additional pipework required Updated:
Integrated sight glass now a part of the recirculation pipework for easy volume reading.
Features:
capacity 70 litre (for 65litre recipes, minimum recipe size 40 litres)
smart control with built-in wireless connectivity and mobile app integration for step-by-step remote controlled brewing
access to brewing tools, recipes and calculators
max. grain bill: 17 kg
conical base for maximum brewhouse efficiency
PID heating control: large conical heating element for efficient heating
CIP capability, including cleaning filter
large counterflow wort chiller, including more powerful pump
rolled edge mash plates: no silicone seals
large dual-stage hop filter: hopping rate of up to 1.5 kg
integrated sight glass for easy volume readings; replace with the sight glass cleaning barb to easily recirculate a cleaning solution
mash recirculation hose and barb: easy to install and remove for efficient mashing
3 year warranty
Technical data:
EU model.
body: stainless steel 304
220-240 V, 3300 W (heating element 3150 W)
Weight machine : 36,5 kg
Size machine: 83 cm x 53 cm
Mash Tun Dead Space Volume: 6,8L
Boil-Off rate: 4L / hour
Large, fragile, heavy, or items that are too large for normal shipping are delivered by pallet or courier service. We will contact you to discuss shipment and shipping rates.
Grainfather GC2 Glycol Chiller with Glycol & Cooling connection kit
Control and power up to two fermenters at different temperatures and fermentation schedules with the GC2. By accurately controlling the temperature of your fermentation, you can produce consistent beers, every time. The Chiller will be shipped with Glycol and one Cooling connection kit.
Features:
Control and power up to two fermenters at different temperatures and fermenting schedules.
Use with the GCA Glycol Chiller Adapter to connect to the Grainfather S SERIES range of fermenters or most other fermenters.
Sleek and compact design with LED control display
Compatible with the Grainfather App when connected to a Grainfather G SERIES fermenter or the GCA for managing your fermentation from anywhere via Wi-Fi
Backed by a 3-year warranty
Dimensions:
583 x 320 x 363mm
19.5kg
3L Glycol tank
Package content:
GC2 Glycol Chiller
Propylene glycol*
1 x Cooling connect kit
Glycol funnel
Silicone tubing for priming pump
%
Grainfather GC2 Glycol Chiller
Control and power up to two fermenters at different temperatures and fermentation schedules with the GC2. By accurately controlling the temperature of your fermentation, you can produce consistent beers, every time. The Chiller will be shipped with Glycol and one Cooling connection kit.
Features:
Control and power up to two fermenters at different temperatures and fermenting schedules.
Use with the GCA Glycol Chiller Adapter to connect to the Grainfather S SERIES range of fermenters or most other fermenters.
Sleek and compact design with LED control display
Compatible with the Grainfather App when connected to a Grainfather G SERIES fermenter or the GCA for managing your fermentation from anywhere via Wi-Fi
Backed by a 3-year warranty
Dimensions:
583 x 320 x 363mm
19.5kg
3L Glycol tank
Package content:
GC2 Glycol Chiller
This article explicitly does not contain:
Propylene glycol: https://brouwland.com/en/chilling/1696-propylene-glycol-1kg.html
1 x Cooling connect kit: https://brouwland.com/en/other/11171-grainfather-cooling-connection-kit.html
Glycol funnel
Silicone tubing for priming pump
Grainfather G40/G70 Distilling Lid
The G40 or the G70 paired with the Distilling Lid offers an all-in-one automated brewing system that can also be used to distill, making it the ultimate combo to brew high quality beer and distill spirits from grain. This lid features an industry standard 4” tri-clamp opening to allow for the connection of the Still Spirits T500 Reflux and Alembic Condensers, as well as third-party distilling equipment.
Specifications:
Material: 304 Grade Stainless Steel Construction
Standard 4” tri-clamp opening (industry standard)
Pressure relief valve
Barrel clamp locking mechanism
Grainfather SF50 Conical Fermenter
The SF50 has a 50-litre capacity and is designed to hold up to 45 litres of wort. The SF50 can be adapted to your needs with an adjustable leg height and caster wheels for easy manoeuvrability. Its intuitive design, 304 stainless steel construction and 113° tapered design make both fermentation and cleaning easy. A perfect companion for smaller brewing systems such as the S40, G30 or G40 and the easybrew sb30p, Brewmonk or Brewster Beacon.
Specifications:
The SF50 is made of high-quality 304 stainless steel.
Adjustable leg height and comes with castors.
Easy yeast dumping with the dump valve.
Built-in thermowell.
Easy sampling with the sample valve placed above the yeast line.
Compatible with the Glycol Chiller Adapter Kit (GCA).
2-year warranty
Product Dimentions:
Size: 886x508mm (Legs at highest position)
Weight: 10 kg
Capacity: 50l (Max 45 litres of wort)
Conical angle: 113°
Grainfather Electric Grainmill and mounting board
The Grainfather electric malt mill is motorised, compact and easy to use at home. It is equipped with large rollers that crack the outer shell of the grain lengthwise, creating an optimal surface for mashing and a better filter bed for rinsing.
The removable grain hopper can hold up to 1 kg of grain at a time, and with 10 easily adjustable openings ranging from 0.8 mm to 2 mm, this mill is designed to handle different types of grain. Grind different base malts and special grains, and even change the speed at which your grain is ground with the variable speed knob.
The malt mill is easy to mount on a workbench or bucket, but works best with the included Grain Mill Bamboo Mounting Board. Moreover, the mill is easy to assemble thanks to its built-in motor and compact design. Simply attach the grain hopper. Set the desired opening by pulling the spring-loaded pin and turning the dial. Put the grain in the hopper and press the switch to start grinding.
Specifications:
Voltage: 220-240V
Power: 400W
Rollers: 58mm diameter, made of hardened stainless steel.
10 grinding positions from 0.8mm-2mm
Grinds 1.7kg of malt per minute
Hopper capacity: 1kg
Grainfather Electric Grainmill and mounting board
The Grainfather electric malt mill is motorised, compact and easy to use at home. It is equipped with large rollers that crack the outer shell of the grain lengthwise, creating an optimal surface for mashing and a better filter bed for rinsing.
The removable grain hopper can hold up to 1 kg of grain at a time, and with 10 easily adjustable openings ranging from 0.8 mm to 2 mm, this mill is designed to handle different types of grain. Grind different base malts and special grains, and even change the speed at which your grain is ground with the variable speed knob.
The malt mill is easy to mount on a workbench or bucket, but works best with the included Grain Mill Bamboo Mounting Board. Moreover, the mill is easy to assemble thanks to its built-in motor and compact design. Simply attach the grain hopper. Set the desired opening by pulling the spring-loaded pin and turning the dial. Put the grain in the hopper and press the switch to start grinding.
Specifications:
Voltage: 220-240V
Power: 400W
Rollers: 58mm diameter, made of hardened stainless steel.
10 grinding positions from 0.8mm-2mm
Grinds 1.7kg of malt per minute
Hopper capacity: 1kg
Grainfather G40/G70 Whirlpool Arm
With the Grainfather G40/G70 Whirlpool arm, Recirculation of the wort will become a piece of cake with no manual stirring necessary.
Grainfather GCast
GCAST is a wireless bridging device that allows you to break free from Bluetooth limitations when brewing with the G30 and the Grainfather App.
GCAST allows you to break free from Bluetooth range limitations giving you more flexibility on your brew day. GCAST is a wireless device that bridges the connection between your G30 controller and the Grainfather App on your smartphone using your Wi-Fi network giving you a more reliable connection so you can brew with confidence.
Specifications:
More flexibility during brew days with a more reliable connection when brewing with the Grainfather App
Break free from Bluetooth® limitations using your home Wi-Fi network
Quick and easy to set up with no additional equipment to get started
Backed by a 3-year warranty
Included in the package:
Gcast
1m Micro USB cable (wall charger not included)
Grainfather SF70 Fermenter
The Grainfather SF70 conical fermenter has been built to hold big batches of wort with a 70L capacity. Its sleek, stainless steel finish makes cleaning simple and with an intuitive design, you can easily adjust the height, take samples, and dump yeast to avoid the build-up of yeast and sediment.
Specifications:
304 Grade stainless steel body.
Conical angeled bottom to avoid sediment getting stuvk.
Adjustable Legs and castor wheels.
Thermowell for inserting temperature probes.
Seperate dump valve.
Sample valve above the trub line.
Compatible with the Glycol Chiller Accesory kit(GCA)
Two years warrenty.
Dimensions: 1300 x 410mm
Volume: 70L (Max Fermentation 65L)
Grainfather Glycol Chiller Adapter Kit (GCA)
The GCA is designed to expand on the capabilities of the Grainfather Glycol Chiller, by allowing almost any fermenter on the market to be connected, and temperature controlled - including most plastic bucket fermenters!
The Glycol Chiller Adapter works in a similar way to the Conical Fermenter Pro but instead of the built-in cooling sleeve and heating element, it uses a stainless steel cooling coil and a heating pad to control the temperature of almost any fermenter.
The cooling coil is connected to the Glycol Chiller and immersed in the fermenter. The heating pad is attached to the side of the fermenter using hook and loop tape. A temperature probe is also attached to the fermenter and the GCA will then regulate the cooling, or heating, as required.
The GCA connects to the Grainfather App so you can control your fermentation temperature on the go
Grainfather GF30 Fermenter coat
The Grainfather Conical Fermenter Coat is the perfect fitment for those in a climate that experiences high condensation rates.
Specifications:
High quality, 5mm thick SBR foam
Whats included
Fermenter body coat
Conical cone coat
Grainfather G30 Rolled Plates Kit
By upgrading your Grainfather G30 with the Rolled Plates Kit, there is no need for the silicone rings that come in the original packaging. The rolled-edges provide a better brewing experience by eliminating the need for a silicone ring on the grain plates, which allows the user to more easily insert the bottom grain plate and the top grain plates into the mash basket.
Kit Includes:
2 x Grainfather G30 Rolled Plates
Instructions:
Attach pipework to one of the G30 rolled plates (bottom plate) gently lower plate into the inner basket.
Continue brewing as per the G30 instructions. Use the second G30 rolled plate as a top plate to sit on top of the mash as you would with the original plate.
%
Grainfather Overflow Filter
Prevents particles from moving down the overflow pipe. For use with Grainfather Brewing Systems. Fits between the overflow inlet and the top mash plate.
Specifications:
Material: 304 stainless steel
Mesh: 600 micron mesh
Centre hole: 23 mm (0.9")
Grainfather S40 brewing system
The Grainfather S40 brewing system has a 46L capacity, allowing you to create 40L of your own beer every time that you brew. This product has a high grade stainless steel build and is packed full of features to make every brew easy.
Features:
304 grade stainless steel body
Easily manage heating using the digital controller with colour display
Built in pump for maximum brewing efficiencies
Easily cool wort with the stainless steel immersion chiller
Recirculation arm for more efficient mashing
2-year warranty
Whats included:
Grainfather S40
Grain basket
Lid
Immersion chiller, hoses connection fittings
Recirculation arm wort sprayer
Built-in pump
%
Tip
Grainfather G30v3 Automatic Brewkettle without chiller
The G30ᵌ is an all-in-one brewing system with a 30 L (8 US Gal) capacity, designed to make up to 40 pints of high-quality beer from one brew. With Grainfather App integration, great features, and an intuitive design, it’s perfect for both beginner and experienced all grain brewers to master their all grain brewing journey.
Features:
Sleek 304 grade stainless steel body
Connect your mobile device to the Bluetooth controller via the Grainfather App and manage your brew remotely
Use with the GCAST Bluetooth Wi-Fi Bridge to bridge the connection between your G30 Controller and Grainfather App through Wi-Fi to give you more flexibility to move around during your brew day
A robust magnetic drive pump for maximum brewing efficiencies
Perforated grain basket negates the need for a top plate and no additional pipework needed
Efficient and sanitary brew transfer with the Counterflow Chiller
Compatible with the Still Spirits T500 Alembic Dome & Condenser
Backed by a 3-year warranty
Compatible with:
GF30 Conical Fermenter
GSERIES Glycol Chillers
GCAST Wireless Bridging Device
SF50 Conical Fermenter
GCA Glycol Chiller Adapter
Alembic Dome
Included in the box:
Grainfather G30ᵌ
Bluetooth controller
NEW Perforated grain basket
Grain plate
Lifting bar
Glass lid
Recirculation pipe
Filter
Hose fittings
Built-in pump
Be adviced: This version of the Grainfather G30 comes without counterflow chiller
Technical Dimensions:
Size: 685 x 386mm (27 x 15’’)
Weight: 14.6kg (32lb)
Max Preboil Volume: 30L (8 US Gal)
Batch Volume: Max: 25L (7 US Gal) | Min: 10L (3 US Gal)
Grain Bill: Max: 8kg (18lb)* | Min: 1.5kg (11lb) *9kg (20lb) with top plate
Power: NZ, AU, EU, UK,: 2000W, 220V
Connectivity: Bluetooth control
Grainfather GF30 Fermenter Basic Cooling Edition EU
The Grainfather Conical Fermenter Basic Cooling Edition includes the Conical Fermenter and Cooling Pump Kit.
This allows you to control the heating of your unit and cooling via the Cooling Pump Kit, dump yeast, take samples and transfer your wort via our innovative dual function valve design.
What's included:
Conical Fermenter
Fermenter LidRubber BungBubbler AirlockCone PlugCone Plug Seal5 cm (2") Tri ClampDigital Temperature DisplayPower Adapter and Wall Plug2 m (6.5 ft) M12 3-Pin Power CordDual Valve TapDigital Temperature ControllerCooling pump kitSpecifications:
304 Stainless Steel Body (polished inner and brushed outer)30 L (8 US Gal) capacity (volume markings on inner body up to 25 L (7 US Gal)30 W, 12 V heating power3.8 cm (1.5") ferrule on lid (for pressure transfer attachments)5 cm (2") ferrule on bottom of coneDual Valve Tap with 110 mm (4.3”) inletDimensions of Conical Fermenter:Diameter with handles: 360 mm
Height (without airlock): 910 mm
Height with bubbler airlock: 1090 mm
Grainfather conical fermenter cooling connect kit
The Grainfather Conical Fermenter Cooling Connection Kit allows you to connect additional Conical Fermenters to The Grainfather Glycol Chiller.
.
2 x Cooling Connection Couplers
2 x 2 m (6,5 ft) hoses
Grainfather GF30 Fermenter Controller
Control the heating and cooling (when used with the glycol chiller) of your fermenter remotely with the Conical Fermenter Pro Controller.
Grainfather Pressurized Transfer kit
Easy to attach to the Grainfather Conical Fermenter, for a clean and easy way to transfer your beer without having to lift the fermenter to perform a gravity fed transfer. This also ensures that there is less chance of oxygen during transfer.
All you need is a C02 bottle and a regulator to attach pressure transfer and you can transfer your beer into a barrel or bottles via the Conical Fermenter's double condensation valve or through the top of the fermenter lid using the beer rack.
NOTE: Batteries are not included for the manometer. 2 x AAA batteries are required.
Grainfather GC4 Glycol Chiller
Manage your fermentation temperature accurately, every time! Temperature control is one of the most crucial elements for producing a beer of good quality. It must be regulated throughout the fermentation process and be stable to ensure that the yeast does not get stressed and ferments properly to get the right taste profile. With the ability to individually control and regulate the temperature of up to four Grainer Conical yeast machines, each with their own yeast schedules, the Grainfather Glycol Chiller is the perfect complement to ensure superior fermentation results.
Design: With a slim and compact design, which is still suitable for our full range of functions, the Glycol chiller maintains the Grainfather principle of delivering high-quality home-brewery equipment, which delivers craft breweries such as results, with a small footprint. With the addition of the Glycol Chiller your system works at the ultimate level and you are even able to crash cold and lower to 4 ° C (39 ° F). The Glycol chiller is connected to a concealed cooler, located between the two stainless steel walls of the conical digester. . Your desired temperature is fed into the digital temperature controller on the conical digester, the liquid then flows through this sleeve and cools the stainless steel, which in turn cools the beer in the digester. The cooling sleeve never comes into contact with the beer, is completely hidden and does not need to be cleaned or disinfected. A real innovation for a fermenter on this scale.
Characteristics:
Allows you to cold-crash 23L (6 US Gal) wort to a temperature of 4-6ºC (39-43 ° F). The minimum temperature will vary based on external factors such as room temperature, the number of connected fermenters and other environmental conditions.
Cools up to 4 conical fermenters at different temperatures and fermentation schedules.
Includes a connection kit and propylene glycol to provide you with efficient cooling for your digester immediately.
Note:
The instructions for the Glycol Chiller are attached to the outside of the shipping box. It is important that you keep them, do not throw them away and read them carefully before use to ensure that no damage is caused to the device. If for any reason you are not included in your purchase, we strongly recommend downloading a new one.
Grainfather GF30 Conical Fermenter Pro
Ferment like never before!
The Grainfather Conical Fermenter Pro gives brewers professional fermentation control, just like the commercial breweries! The Grainfather Conical Fermenter Pro allows you to control the heating of your unit (and cooling with the Glycol Chiller), dump yeast, take samples and transfer wort via our innovative dual function valve design. The 60-degree (Golden Angle) cone allows for optimum yeast/sediment drop down, giving you clearer beer.
The Conical Fermenter Pro comes with a built-in controller with wireless connectivity and sleek digital display. Wherever you are, you can access your fermenter's data through the Grainfather app.
Content of the box:
Conical Fermenter
Fermenter Lid
Rubber Bung
Bubbler Airlock
Cone Plug
Cone Plug Seal 5 cm (2")
Tri Clamp
Digital Temperature Display
Power Adapter and Wall Plug 2 m (6.5 ft)
Dual Valve Tap
Digital Temperature Controller (Wifi)
Specifications:
304 Stainless Steel Body (polished inner and brushed outer)
30 L (8 US Gal) capacity (volume markings on inner body up to 25 L (7 US Gal)
30 W, 12 V heating power
3.8 cm (1.5") ferrule on lid (for pressure transfer attachments)
5 cm (2") ferrule on bottom of cone
Dual Valve Tap with 110 mm (4.3”) inlet
Dimensions of Conical Fermenter:
Diameter with handles: 360 mm
Height (without airlock): 910 mm
Height with bubbler airlock: 1090 mm
%
Grainfather 10 L Micro Pipework
Perfect for small batch brewing, where you can test different beer styles or recipes and have more varieties of beer on the go.
The Micro Pipework is perfect for brewing 10 L beers, or standard batches of a lower ABV beer with a small grain bill.
Grainfather Bamboo mounting board
The Grain Mill Bamboo Mounting Board works great with the Electric Grain Mill. Mount the mill onto the board and place it over a bucket to catch your freshly crushed grain.
Graincoat Insulation Jacket for Grainfather G30
This heat insulation jacket is designed to be used with the Grainfather G30 to keep heat contained in the boiler and maintain a constant temperature during your brew.
Material: SBR (Styrene-Butadiene Rubber) foam
Thickness: 11 mm
Easy to wipe clean, polyurethane outer layer and machine washable.
Grainfather Wortometer
The Wortometer is a convenient accessory to your Grainfather Connect. Use in conjunction with the Grainfather Connect Control Box thermometer, for accurate control of your wort transfer temperature through the Grainfather Counter Flow Chiller.
Avoid long lag time and off flavours by using the Grainfather Wortometer. Adjust your wort and water flow rates from the Grainfather Counter Flow Chiller by dialling in the exact wort temperature your specific yeast requires. Requires a 8 mm inner diameter silicon hose, we recommend our 8 x 11mm silicone hose.
Grainfather Sparge/Spoel water heater EU 18 Liters
The Sparge Water Heater is a temperature controlled urn that allows you to heat up to 18 L of water. This makes the process easier, start heating your sparge water when you begin the mash to ensure it is ready for when you need to sparge. Once water is at required temperature, it will hold that temperature until changed or turned off.
The Sparge Water Heater features:
18 L Capacity
Stainless Steel Body
2 kw Element
Sight Glass (with 1 L graduations visible)
Tap Temperature Control
Heating Lights (to indicate input temperature has been reached or is still being heated)
NOTE: Graduations on the scale are measured from the tap.
Grainfather G40, G70 & SS Fermenter 1/2" Tap
For use with the G70 and G40 to allow quick drainage from the bottom of the unit. Made with high temperature resistant 304 grade stainless steel, the faucet’s operating temperature ranges from -10°C to 150°C.
Specifications:
1/2” ball valve
304 grade stainless steel faucet
Fits silicone hose 12x17 or Pvc hose 12x16
Propylene Glycol 3 L
To keep the Grainfather Glycol Chiller operating at its best, we recommend replacing the glycol/water mixture every 6 months. Enough to completely refill the Glycol Chiller and connect up to 4 Conical Fermenters, this food grade propylene glycol will keep the chiller running at its best, providing you with efficient cooling for your fermenters.
Grainfather GC4 Glycol Chiller
Manage your fermentation temperature accurately, every time! Temperature control is one of the most crucial elements for producing a beer of good quality. It must be regulated throughout the fermentation process and be stable to ensure that the yeast does not get stressed and ferments properly to get the right taste profile. With the ability to individually control and regulate the temperature of up to four Grainer Conical yeast machines, each with their own yeast schedules, the Grainfather Glycol Chiller is the perfect complement to ensure superior fermentation results.
Design: With a slim and compact design, which is still suitable for our full range of functions, the Glycol chiller maintains the Grainfather principle of delivering high-quality home-brewery equipment, which delivers craft breweries such as results, with a small footprint. With the addition of the Glycol Chiller your system works at the ultimate level and you are even able to crash cold and lower to 4 ° C (39 ° F). The Glycol chiller is connected to a concealed cooler, located between the two stainless steel walls of the conical digester. . Your desired temperature is fed into the digital temperature controller on the conical digester, the liquid then flows through this sleeve and cools the stainless steel, which in turn cools the beer in the digester. The cooling sleeve never comes into contact with the beer, is completely hidden and does not need to be cleaned or disinfected. A real innovation for a fermenter on this scale.
Characteristics:
Allows you to cold-crash 23L (6 US Gal) wort to a temperature of 4-6ºC (39-43 ° F). The minimum temperature will vary based on external factors such as room temperature, the number of connected fermenters and other environmental conditions.
Cools up to 4 conical fermenters at different temperatures and fermentation schedules.
Includes a connection kit and propylene glycol to provide you with efficient cooling for your digester immediately.
Note:
The instructions for the Glycol Chiller are attached to the outside of the shipping box. It is important that you keep them, do not throw them away and read them carefully before use to ensure that no damage is caused to the device. If for any reason you are not included in your purchase, we strongly recommend downloading a new one.