Easybrew Accessories

29%

Insulation Jacket for Easybrew SB30p

Would you like to keep the heat inside your Easybrew SB30p while brewing, thus making it more efficient, both in terms of constant mash temperatures and in terms of energy consumption? The Easybrew insulation Jacket is definitely something for you to consider! The jacket also fits other electric brewing kettles such as easybrew SB30+ and the Brewster Beacon.

€15.37* €21.95*

Stirring Spoon - Stainless Steel - 60 cm

Mash Paddle - Stainless Steel - 60 cm Our handy mash paddle made from 100% stainless steel is an essential tool for every homebrewer. With a length of 60 cm, this paddle is perfect for stirring the mash during the brewing process. The durable stainless steel ensures a long lifespan and easy cleaning. Product Details: Material: 100% Stainless Steel Length: 60 cm Ideal for stirring the mash Durable and easy to clean Perfect for your home or professional brewing system!

€16.95*

20%

Insulation Jacket for FB30 Fermenter

The Easybrew insulation jacket is a handy accessory for those cold winter days. It will help you to keep the temperature in your fermenter during colder days to prevent your fermentation from stalling.

€24.76* €30.95*

Easybrew 30 transparant peilglas upgrade kit

Transparent level gauge for Arsegan Easybrew 30

Transparent level gauge for Arsegan Easybrew 30:with liter grading for easy installation on the tapalso fits other electric brewing kettles (with tap) such as Hopcat, Klarstein, Brewdevil, Brew Beacon, Brewmonk to name a few.

€40.95*

Vervangende siliconen knieën voor Easybrew brouwketels 2 stuks.

Replacement silicone knees for Easybrew brewkettles 2 pcs.

Replacement silicone knees for the Easybrew brewing kettles. 2 pieces

€6.45*

Easybrew 50 transparant peilglas upgrade kit

Transparent level gauge for Arsegan Easybrew 50

Transparent level gauge for Arsegan Easybrew 50: with liter grading for easy installation on the tapalso fits other electric brewing kettles (with tap) such as Hopcat, Klarstein, Brewdevil, Brew Beacon, Brewmonk to name a few.

€43.95*

20%

Bi-metal Thermometer -10°C - 100°C

3" / 6,62 cm displayGraden Celsius en Fahrenheit-/+ 1°C nauwkeuring.1/2" male draad (NPT)Inclusief bevestigingsmoer

€22.36* €27.95*

20%

Easybrew Insulation Jacket for Easybrew SB60p

Would you like to keep the heat inside your Easybrew SB60p while brewing, thus making it more efficient, both in terms of constant mash temperatures and in terms of energy consumption? The Easybrew insulation Jacket is definitely something for you to consider!

€8.03* €10.04*

Whirlpoolarm for Easybrew 30

The Easybrew Whirlpool Arm is a handy accessory for your Easybrew 30 which fits on the external circulation pipe. This accessory makes it very easy to create a whirlpool at the bottom of your Easybrew kettle using the integrated magnetic pump.The hop debris and other break materials will be collected towards the middle of the kettle allowing you to transfer clear wort to your fermenting vessel.Specifications:stainless steel whirlpool arm with cam-lock couplingwith insulated handgriplength 355 mm

€22.45*

Easybrew Haakse pijp voor pomp SB30 en SB60

Easybrew Tube for pump hole

Replacement tube for pump hole Easybrew EB30p and EB60p. This tube prevents dry boiling of the brew kettle. Also fits older models of the Easybrew.

€9.45*

20%

Dryhop deksel voor FB30 emmer met thermowell

Dry hopping Lid for FB30 bucket With Thermowell

€52.76* €65.95*

20%

Easybrew Thermometer voor FB30 Bucket 30L

Easybrew Thermometer for FB30 and FB60 buckets

Replacement Thermometer for the Easybrew FB30 and FB60 Fermenting Bucket. Length 150mm.

€8.36* €10.45*

Replacement lid for fb30 fermenting bucket

€22.45*

20%

Easybrew hop spider

Easybrew Hop Spider: convenient way of adding hops to your brew, can easily be removed after the boil.made of stainless steel (304)height: 35 cmdiameter opening: 15 cmmesh size: 200 microneasy to hang of the side of your brew kettlethe wort flow through the hop spider guarantiees an efficient isomerisation and extraction of aromas and flavours from the added hops,

€21.56* €26.95*

Whirlpoolarm for Easybrew 60

The Easybrew Whirlpool Arm is a handy accessory for your Easybrew 60 which fits on the external circulation pipe. This accessory makes it very easy to create a whirlpool at the bottom of your Easybrew kettle using the integrated magnetic pump.The hop debris and other break materials will be collected towards the middle of the kettle allowing you to transfer clear wort to your fermenting vessel.Specifications:stainless steel whirlpool arm with cam-lock couplingwith insulated handgriplength 395 mm

€22.45*

20%

Easybrew Chillercoil for 30L bucket

The Easybrew Chillercoil is one of those tools that can help you brew better beers. The Chillercoil allows you to control the fermentation temperature of your wort. Specifications: Material: 304 stainless steel Coil Length: 4.7m. Hole for airlock.

€61.16* €76.45*

Insulation Jacket for FB60 Fermenter

€38.95*

Easybrew Grainbasket with wired mesh bottom 60l

The new EasyBrew malt pipe with integrated stainless steel grid. The fine stainless steel grid in the lower third of the malt pipe ensures better mixing of the mash and therefore a more uniform temperature distribution in the mash tun.In addition, the handles on the outside of the malt pipe have been reinforced in order to withstand even the largest of pours. Note: Unfortunately, this malt basket does not fit older versions of the Easybrew.

€92.95*

20%

Tip

EasyBrew Stainless steel Steamhood

Steamhood. Stainless steel steam hood lid. Diameter 37 cm. The vapor drain pipe has a diameter of 10 cm. Fits only on the Easybrew SB30P brew kettle. Tip: Can also be used as a hopper for your malt. Tip: Make sure that the tubes are slightly sloped, so that condensation disappears through the outlet and cannot run back to the kettle. Tip: Make sure there is a gap between the boiler and the steamhood, so enough air can be supplied to make the fan work optimally. For installation material visit ventilatieshop.com Whisper 'Gold Line' tube fan diameter 100 & 125mm

€52.76* €65.95*

20%

Easybrew Sparge water heater 20L

With the Easybrew sparge water heater with temperature control you can quickly and easily heat up your sparge water. Once the sparge water has reached the correct temperature, the Easybrew sparge water heater will hold it at the set temperature. This water heater is equipped with a handy graduated sight glass. Features of the sparge water heater: Content: 20 liters. Power: 2000 watts. Material: 304 stainless steel. Viewing glass with volume graduation.. Watertap. Temperature controller. The volume of the easybrew sparge water heater is ideal for use with the Easybrew 30, SB30+ and SB30p. However, it is also suitable for use with the Speidel Braumeister 10 and 20 and the Grainfather G30.

€78.76* €98.45*

20%

Tip

RVS Trolley voor Brouwketels | Brouwsystemen

Stainless Steel Trolley for Brewing Kettles | Machines

Stainless steel trolley with 4 castors with brake. Suitable for both 30 L and 60 L brew kettles of almost any brand. Specifications Stainless steel version. Maximum load 100 kg. Dimensions: l x w x h is 51 x 51 x 40 cm. Usable space for kettles is 45 cm x 45 cm. Delivered as a self-assembly kit. Trolley is equipped with 4 swivel castors with brake.

€87.16* €108.95*

Easybrew SB30 Glass Lid

Replacement lid for the Easybrew SB30p or SB30+This lid suits also on an older model EB 30/50, not on EB60.

€25.95*

Hop Spider Conical

Hop Spiders are to help prevent hops blocking your pump or getting into your chiller / fermenter. It sits over the edge of your kettle, pot or even Easybrew. Simply bend the handle to suit your vessel. Perfect for containing hops while brewing beer and prevents hops getting into your chiller or fermenter! The spider sits over the edge of your kettle, keggle or is ideally suited to use with your Easybrew. During the boil hops can be poured directly into the spider. The spider is suitable for up to 300grams of hops. The basket is 35cm high with the opening at the top being15cm diameter and tapers down to a 10cm diameter at the bottom. It’s completely made from 304 stainless and the mesh is 0.2mm aperture (40 mesh) so it will capture 99% of the hop material while still allowing the hops to move in the kettle so you get good hop efficiency. Specifications: Capacity 300g Pellet Hops 304 Stainless Construction 0.2mm Apeture Mesh (99% Efficiency in trapping hops) 35cm High 15cm Top Diameter 10cm Bottom Diameter

€33.45*

20%

Easybrew gistemmer 30 met drooghopdeksel & thermosfles

Easybrew Fermenting Bucket 30 with Dry-Hop Lid& Thermowell

Stainless steel fermenter with conical base 30 litre model, for brews up to 25 litres.The conical base provides a concentrated yeast deposit so that clear beer can be tapped easily via the tap in the cone. Capacity: 30 litres Stainless steel lid with removable lid for dry hopping and a cooling coil for producing bottom-fermented beers!Matt stainless steel finish (AISI 304) Equipped with conical base3 feet 2 stainless steel handles Removable lid for dry hopping Thermometer 0-40 °C 3/8" filling valve Total outlet mounted on the cone with 3/4" stainless steel tap Volume markings on the inside in litres

€167.96* €209.95*

Filter products

Easybrew Accessories