Brewtools B150pro Brewing System (EU)

Tank volume of 46 liters (12 gallons) and malt capacity of 9kg (20 lbs). Pre-boil volume of 20-40 liters (5-11 gallons) for flexibility. Rapid heating and boiling with 3.2kW heating power. Enhanced accuracy with 2 digital sensors. Conical bottom with center draining for quick and effortless cleaning.Advanced control system with a 7" touch-screen, WiFi, and Bluetooth 4.2. The B40pro boasts a boil capacity of 40 liters (10 gallons) and approximately 9kg (20 lbs) malt capacity. It comes equipped with a robust pump controllable from the touch-screen. Wort circulates up through the center-pipe, and the pump attaches using Tri-Clamps, making removal easy even when the tank is full. The malt pipe features latches that unfold when lifted, allowing you to use both hands for lifting. Sparging is tube and pipe-free outside the tank. A sparge tube, positioned on the exterior of the centerpipe, follows the malt pipe when lifted, along with lifting the wort spreading device. This simplifies sparging from a separate tank without creating a mess. Post-B40pro brewing, there's no need to turn it upside down for cleaning. The centerpipe detaches effortlessly, enabling easy unit cleaning, with all trub draining directly into a bucket or drains. Utilize the included circulation device as a CIP solution to save time and cleaning chemicals. The system features two digital temperature sensors—one at the tank bottom and another before the pump. The maximum static offset is ±0.5°C. Sensors can be individually calibrated for maximum accuracy, boasting an accuracy of 0.1°C. You can also connect a third sensor (accessory) to monitor the wort temperature returning from the counterflow cooler, allowing you to pump directly to the fermenter when the temperature is optimal.With powerful heating elements providing over 3.2kW (230V) of power, water or wort heating is exceptionally fast. During the boil, the PID system deactivates, letting you adjust the power output for the perfect rolling boil. You can also adjust the maximum current of each mains input to 10, 13, 15, and 16 Amps, ensuring you never blow a fuse.All ports are 34mm Tri-Clamp fittings for maximum flexibility without leaks. The system is shipped with one 3-way valve as standard. All silicone tubes are 16x25mm food-grade silicone. The custom-developed control system features high-quality electronics and receives regular software updates with new features, facilitated via WiFi. Specifications: Dimensions excl. packaging: 58 (h) x 52 (w) x 52 (d) cm Dimensions with one side valve: 58 (h) x 62 (w) x 52 (d) cm Dimensions with two valves: 58 (h) x 72 (w) x 52 (d) cm Packaging dimensions: 70 (h) x 55 (w) x 55 (d) cm Weight excl. packaging: 20 kg Weight incl. packaging: 24.5 kg Tank dimensions: Ø40 cm, height 36 cm Tank volume: 46 liters (rec maximum boil volume – 40 liter)Malt pipe dimensions: Ø32 cm, height 32 cm Malt pipe volume: 25.7 l Max recommended grain quantity: 9 kg Minimum liquid volume: 15 l Build material: 1.0 mm stainless steel (SS304) Heating elements: 230V, 3200W (2x1600W) Pump: 24VDC brushless, max 25 l/min, max head 4.5 m, stainless steel head, stepless speed control from touch display Controller: ARM Cortex M4 180mhz, 7" Touch display Connectivity: WiFi 802.11 b/g/n, Bluetooth 4.2, MicroSD Hoses: 16x25mm silicone, food grade What's included: Complete brewing system with controller, pump, tank sensor, heaters and lid Malt pipe with handle and latches 1 pcs expanded metal filter 1 pcs 3-way valve Temperature sensor with adapter for pump line 5 pcs 34mm Tri Clamps with gaskets (all used for standard setup) 3 pcs 34mm TC blind caps 1 pcs dip tube, short type 1 pcs mash hat for spreading the wort 1 pcs sparge tube 150cm 16x25mm silicone tube 1 pcs 34mm TC to 19mm hose barb adapter O-rings for the center pipe and dip tube 1 pcs Power Cable, 2 meter

Key Features:The B80pro boasts an 80-liter (21-gallon) boiling capacity and approximately 20kg (44 lbs) malt capacity. It comes with a robust pump controllable through its 7" touch-screen interface. The wort circulates upward through the central pipe, easily detachable with Tri-Clamps even when the tank is full. For added convenience, the malt pipe features unfolding latches, allowing for two-handed lifting. Sparging is simplified without external tubes or pipes, as a sparge tube attached to the center pipe rises along with the malt pipe, lifting the wort-spreading device. This minimizes mess when sparging from a separate tank. Cleaning the B80 pro is easy and efficient. Simply remove the center pipe for easy cleaning, with trub draining directly into a bucket or drains. The included circulation device serves as a CIP (Clean in Place) solution, saving time and cleaning chemicals.The system incorporates two digital temperature sensors, with a maximum static offset of ±0.5°C. These sensors, located at the tank's bottom and before the pump, boast an accuracy of 0.1°C. Individual calibration is possible for maximum precision. An optional third sensor can be connected to monitor the returning wort temperature, allowing direct pumping to the fermenter at the ideal temperature. With a potent heating system totaling 6kW (230V), water or wort heating is remarkably swift. During the boil, the PID system deactivates, enabling adjustment of the power output for achieving the perfect rolling boil. You can also set the maximum current for each mains input, ranging from 10 to 16 Amps. All ports feature 34mm Tri-Clamp fittings, ensuring maximum flexibility without the risk of leaks. The system ships with a standard 3-way valve, and all included silicone tubes are 16x25mm, meeting food-grade standards. The custom-developed control system boasts high-quality electronics, with continuous software improvements and updates accessible via WiFi.Specifications:Dimensions excl. packaging: 67.5 (h) x 62 (w) x 62 (d) cm Dimensions with one side valve: 67.5 (h) x 72 (w) x 62 (d) cm Dimensions with two valves: 67.5 (h) x 82 (w) x 62 (d) cm Packaging dimensions: 83 (h) x 62 (w) x 62 (d) cm Weight excl. packaging: 27.5 kg Weight incl. packaging: 34 kg Tank dimensions: Ø50 cm, height 46 cm Tank volume: 90 liters (rec maximum boil volume – 80 liters) Malt pipe dimensions: Ø42 cm, height 42 cm Malt pipe volume: 58 l Max recommended grain quantity: 20 kg Minimum liquid volume: 25 l Build material: 1.0 mm stainless steel (SS304) Heating elements: 230V, 6000W (2x3000W) (two individual circuits) Pump: 24VDC brushless, max 25 l/min, max head 4.5 m, stainless steel head, stepless speed control from touch displayController: ARM Cortex M4 180mhz, 7" Touch display Connectivity: WiFi 802.11 b/g/n, Bluetooth 4.2, MicroSD Hoses: 16x25mm silicone, food gradeWhat's included:Complete brewing system with controller, pump, tank sensor, heaters and lidMalt pipe with handle and latches 1 pcs expanded metal filter 1 pcs 3-way valve Temperature sensor with adapter for pump line 5 pcs 34mm Tri Clamps with gaskets (all used for standard setup) 3 pcs 34mm TC blind caps 1 pcs dip tube, short type 1 pcs mash hat for spreading the wort 1 pcs sparge tube – 150cm 16x25mm silicone tube 1 pcs 34mm TC to 19mm hose barb adapter O-rings for the center pipe and dip tube Power Cables, 2 meter