Brewtools F80 Unitank 20-75L

Key Features: The PureBlast™ surface is applied both inside and outside, eliminating the need for wax and polishing compounds while avoiding the necessity of passivation. The vertical walls feature a cooling jacket for efficient cooling, eliminating the complexity of cleaning a spiral. Numerous options are available for connecting accessories such as sensors, heaters, carb. stones, and other additions. Pressure rating of 2 bar / 30 PSI. Easy access through an 8" TC port on top. Includes 2" TC dump and racking valves. The Brewtools Unitanks are designed and manufactured, with special attention to safety and quality. They are tested and certified accordig to the reuirements for PED 2014/68/EU by a third party. Specifications:Low height w/o acc.: 83 cm Max height w/o acc.: 103 cmPackaging size: 85 (h) x 52 (w) x 52 (d) cmNet weight: 38 Kg - Gross weight: 44.6 KgTank diameter (inside): Ø40 cmGross volume: 51 literMax rec. volume: 40 literMin rec. volume: 20 literVolume, cone: 12 literMaterial: 1.5mm stainless steel (SS304Operating pressure: 1.0 bar / 15 PSIMax pressure: 2.0 bar / 30 PSIMin. pH: 4.5 In the box:Unitank with adjustable frame1 pcs Analog pressure gauge, TC34mm2 pcs Butterfly-valve, 2"1 pcs Butterfly-valve, 34mm DN21 pcs Blow-off pipe 1 pcs Racking arm 2"1 pcs TC elbow 90°, 2"1 pcs Insulation jacket, black neoprene1 pcs Sample valve, 34mm1 pcs TC Adapter 8"-3"1 pcs TC blind cap, 3"1 pcs TC blind cap 2"2 pcs TC blind cap 1.5"3 pcs TC blind cap 34mm2 pcs TC gasket 8" lipped2 pcs TC gasket 3"2 pcs TC gasket 2" 5-pack1 pcs TC gasket 1.5" 5-pack3 pcs TC gasket 34mm 5-pack (DN20)1 pcs Tri Clamp 8"1 pcs Tri Clamp 3"5 pcs Tri Clamp 2"2 pcs Tri Clamp 1.5" 10 pcs Tri Clamp 34mm1 pcs TC tool 4 pcs M10 steel/rubber feet1 pcs TC34mm safety valve (PRV, 2 bar)Necessary bolts and parts for assemblyRecommended accessories:HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Carb. stone kit with Ball-Lock, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, 2" sight glass etc.

Key Features:Our PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation. Cooling jacket in the vertical walls offers efficient cooling without the hazzle of cleaning a spiral. Many options for connecting accessories like sensors, heaters, carb. stones and other accessories.Pressure rated for 2 bar / 30 PSI. 8" TC port on top for easy access. 2" TC dump and racking valves.Brewtools Unitanks are designed and manufactured with special attention to safety and quality.They are tested and certified according to the requirements for PED 2014/68/EU by a third party.Specifications:Low height w/o acc.: 127 cmMax height w/o acc.: 147 cmPackaging size: 130 (h) x 60 (w) x 60 (d) cm Net weight: 56.0 kgGross weight: 61.9 kgTank diameter (inside): Ø50 cmGross volume: 158 literMax rec. volume: 140 literMin rec. volume: 40 literVolume, cone: 24 literMaterial: 1.5mm stainless steel (SS304)Operating pressure: 1.0 bar / 15 PSIMax pressure: 2.0 bar / 30 PSIMin. pH: 4.5In the box:Unitank with adjustable frame1 pcs Analog pressure gauge, TC34mm2 pcs Butterfly-valve, 2"1 pcs Butterfly-valve, 34mm DN201 pcs Blow-off pipe1 pcs Racking arm 2"1 pcs TC elbow 90°, 2"1 pcs Insulation jacket, black neoprene1 pcs Sample valve, 34mm1 pcs TC Adapter 8"-4"1 pcs TC blind cap, 4"1 pcs TC blind cap 2"2 pcs TC blind cap 1.5"3 pcs TC blind cap 34mm2 pcs TC gasket 8" lipped2 pcs TC gasket 4"2 pcs TC gasket 2" 5-pack1 pcs TC gasket 1.5" 5-pack3 pcs TC gasket 34mm 5-pack (DN20)1 pcs Tri Clamp 8"1 pcs Tri Clamp 4"5 pcs Tri Clamp 2"2 pcs Tri Clamp 1.5"10 pcs Tri Clamp 34mm1 pcs TC tool4 pcs M10 steel/rubber feet1 pcs TC34mm safety valve (PRV, 2 bar)Necessary bolts and parts for assemblyRecommended accessories:HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Carb. stone kit with Ball-Lock, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, 2" sight glass etc.

Key Features: The PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation. Cooling jacket in the vertical walls offers efficient cooling.Many options for connecting accessories like sensors, heaters, carb. stones and other accessories. Pressure rated for 2 bar / 30 PSI. 8" TC port on top for easy access. 2" TC dump and racking valves. The Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Low height w/o acc.: 168 cm Max height w/o acc.: 188 cm Packaging size: 180 (h) x 72 (w) x 72 (d) cmNet weight: 75.8 Kg - Gross weight: 95 Kg Tank diameter (inside): Ø60 cm Gross volume: 310 liter Max rec. volume: 290 liter Min rec. volume: 120 liter Volume, cone: 40 liter Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI Min. pH: 4.5  In the box: Unitank with adjustable frame 1 pcs Analog pressure gauge, TC34mm 2 pcs Butterfly-valve, 2" 1 pcs Butterfly-valve, 34mm DN20 1 pcs Blow-off pipe - 1 pcs Racking arm 2" 1 pcs TC elbow 90°, 2" 1 pcs Insulation jacket, black neoprene 1 pcs Sample valve, 34mm 1 pcs TC Adapter 8"-4" 1 pcs TC blind cap, 4" 1 pcs TC blind cap 2" 2 pcs TC blind cap 1.5" 3 pcs TC blind cap 34mm 2 pcs TC gasket 8" lipped 2 pcs TC gasket 4" 2 pcs TC gasket 2"5-pack 1 pcs TC gasket 1.5" 5-pack 3 pcs TC gasket 34mm 5-pack - 1 pcs Tri Clamp 8" 1 pcs Tri Clamp 4" 5 pcs Tri Clamp 2" 2 pcs Tri Clamp 1.5" 10 pcs Tri Clamp 34mm 1 pcs TC tool 4 pcs M10 steel/rubber feet 1 pcs TC34mm safety valve (PRV, 2 bar) Necessary bolts and parts for assembly Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Carb. stone kit with Ball-Lock, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, 2" sight glass etc.

MiniUni™ is a series of high quality and versatile tanks designed for fermentation, storage, beer serving, and various applications such as water heating, liquid storage for cleaning, HERMS setups, and more. These tanks are offered in five different sizes, each sharing the same features and design, differing only in height. Key Features:The PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation.Easy cleaning with a 4" TC top port and 2" TC bottom portPressure rated for 2 bar / 30 PSI.Wall bracket included The MiniUni tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications:Packaging size: 34 (w) x 34 (d) x 108.5 (h) cmNet weight: 12.85 KgGross weight: 14.8 KgTank diameter (inside): Ø28 cmMax volume: 50 literVolume, cone: 1,7 literMaterial: 1.5mm stainless steel (SS304)Operating pressure: 1.0 bar / 15 PSIMax pressure: 2.0 bar / 30 PSI In the box:MiniUni™ Tank - Base with silicone gasketWall bracket and wall supportWall bracket safety pinComposite TC adapter 4" to 34mmAirlock, 3-piece with holderTri Clamp, 4" - Tri Clamp, 2"TC Blind cap, 2"TC Gaskets

MiniUni™ is a series of high quality and versatile tanks designed for fermentation, storage, beer serving, and various applications such as water heating, liquid storage for cleaning, HERMS setups, and more. These tanks are offered in five different sizes, each sharing the same features and design, differing only in height.The MiniUni+ variants include an additional cooling jacket with 3/8" NPT ports and two 1.5" TC ports for attaching accessories. For added functionalities like pressure fermentation and floating ball racking, consider the optional pressure kit, which also includes a specially designed stainless steel spunding valve by Brewtools. Facilitating split batches, the triple wall bracket allows easy wall-mounting of three tanks.Key Features: The PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation.Easy cleaning with a 4" TC top port and 2" TC bottom port Pressure rated for 2 bar / 30 PSI. Wall bracket included Cooling jacket with 3/8" NPT ports Two 1.5" TC ports .The MiniUni tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party.Specifications:Packaging size: 34 (w) x 35 (d) x 109 (h) cmNet weight: 20.7 KgGross weight: 22.2 KgTank diameter (inside): Ø28 cmMax volume: 50 literVolume, cone: 1,7 literMaterial: 1.5mm stainless steel (SS304)Operating pressure: 1.0 bar / 15 PSIMax pressure: 2.0 bar / 30 PSIIn the box: MiniUni™ Tank - Base with silicone gasketWall bracket and wall support - Wall bracket safety pinComposite TC adapter 4" to 34mmAirlock, 3-piece with holderTri Clamp, 4"Tri Clamp, 2"2 pcs Tri Clamp, 1.5"TC Blind cap, 2"2 pcs TC Blind cap, 1.5"TC Gaskets

MiniUni™ is a series of high quality and versatile tanks designed for fermentation, storage, beer serving, and various applications such as water heating, liquid storage for cleaning, HERMS setups, and more. These tanks are offered in five different sizes, each sharing the same features and design, differing only in height. Key Features:The PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation.Easy cleaning with a 4" TC top port and 2" TC bottom portPressure rated for 2 bar / 30 PSI.Wall bracket included The MiniUni tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications:Packaging size: 34 (w) x 34 (d) x 93 (h) cm Net weight: 11.2 KgGross weight: 13 KgTank diameter (inside): Ø28 cmMax volume: 40 literVolume, cone: 1,7 literMaterial: 1.5mm stainless steel (SS304)Operating pressure: 1.0 bar / 15 PSIMax pressure: 2.0 bar / 30 PSI In the box:MiniUni™ Tank - Base with silicone gasketWall bracket and wall supportWall bracket safety pinComposite TC adapter 4" to 34mmAirlock, 3-piece with holderTri Clamp, 4"Tri Clamp, 2"TC Blind cap, 2"TC Gaskets

MiniUni™ is a series of high quality and versatile tanks designed for fermentation, storage, beer serving, and various applications such as water heating, liquid storage for cleaning, HERMS setups, and more. These tanks are offered in five different sizes, each sharing the same features and design, differing only in height.The MiniUni+ variants include an additional cooling jacket with 3/8" NPT ports and two 1.5" TC ports for attaching accessories. For added functionalities like pressure fermentation and floating ball racking, consider the optional pressure kit, which also includes a specially designed stainless steel spunding valve by Brewtools. Facilitating split batches, the triple wall bracket allows easy wall-mounting of three tanks.Key Features:The PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation.Easy cleaning with a 4" TC top port and 2" TC bottom portPressure rated for 2 bar / 30 PSI.Wall bracket includedCooling jacket with 3/8" NPT portsTwo 1.5" TC portsThe MiniUni tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party.Specifications:Packaging size: 34 (w) x 35 (d) x 93 (h) cmNet weight: 14.2 Kg - Gross weight: 15.8 KTank diameter (inside): Ø28 cMax volume: 40 literVolume, cone: 1,7 literMaterial: 1.5mm stainless steel (SS304)Operating pressure: 1.0 bar / 15 PSIMax pressure: 2.0 bar / 30 PSI In the box:MiniUni™ Tank - Base with silicone gasketWall bracket and wall supportWall bracket safety pinComposite TC adapter 4" to 34mmAirlock, 3-piece with holderTri Clamp, 4"Tri Clamp, 2"2 pcs Tri Clamp, 1.5"TC Blind cap, 2"2 pcs TC Blind cap, 1.5"TC Gaskets