The Spundy from Keg King is a neat little gadget that works as well as any spunding valve on the market. With a low profile - just 4.5 cm tall - the Spundy doesn't take up much room in fermentation chambers or kegerators.
Spundy provides brewers with the ability to set the pressure control simply by turning the black valve tip clockwise to increase pressure or counter clockwise to release.
The built in pressure gauge lets brewers see exactly what pressure is being held from 0 to 30 PSI (2 Bar).
Spundy's pressure gauge unscrews for easy cleaning and can even be used with a pre-set PRV (pressure relief valve).
Replacing the valve tip with a PRV gives brewers the advantage of preselecting the pressure they want to hold before there is pressure present.
The Apollo 60 L Unitank Pressure Fermenter is big enough to match your homebrewing ambitions! Pressure ferment and carbonate a double batch of quality craft beer in one 60 L tank.
With its conical shape, clear, high-strength PET build, and high level of fermentation control, the Apollo allows you to ferment under pressure, with confidence.
Product Specifications:
Stainless steel plunge valve and collection bottle for dumping trub and harvesting yeast
A dry hop port for sanitary dry hopping
Centralised floating dip tube for clear transfers
Thermowell to monitor the internal temperature
Built in handles
CIP Capability
True conical shape
Stainless steel stand with castors
When finished, the beer can be served directly from the fermenter, or transferred to a keg without introducing oxygen. Each unit is pressure tested straight off the production line.The Spundy from Keg King is a neat little gadget that works as well as any spunding valve on the market. With a low profile - just 4.5 cm tall - the Spundy doesn't take up much room in fermentation chambers or kegerators.
Ferment and serve from the same tank with the Fermenter King Junior from Keg King. Made from clear, high-quality PET, you can ferment your beer under pressure, and then serve it directly out of the fermenter by hooking it up to your kegerator/tap system.
At 20 L, the Fermenter King Junior will hold the same as a cornelius keg and you easily fit two in your kegerator.
A spunding valve will be required to control the internal pressure of the fermenter. (5016419 or 5016418)
Use this Spunding Valve from Keg King to set the desired pressure in your pressure fermenter. Simply attached to the fermenter gas disconnect and set the pressure using the adjustable valve. When the pressure reaches the set PSI/Bar, the valve will relieve the pressure out of the fermenter.
The gauge displays up to 15 PSI. Constructed of brass with steel spring to control the internal poppet.
This Jacket from Keg King fits the Apollo 60L Unitank. The Jacket will help control the temprature when fermenting. Especially helpfull when doing tempreture controlled fermentation.
The Apollo 30 L Snub Nose Pressure Fermenter takes brewing to new heights. This is the perfect fermenter to get into pressure fermentation, allowing you to ferment and carbonate in one vessel, meaning you get to drink your beer sooner.
With its conical shape, and clear, high-strength PET build, the Apollo allows you to ferment quality beer, under pressure, with confidence.
Specifications:
A dry hop port for sanitary dry hopping
Multi pressure option PRV selection - select the pressure setting from the 3 x PRVs included
Centralised floating dip tube for clear transfers
Thermowell to monitor the internal temperature
Built in handles
True conical shape
Stainless steel stand
When finished, the beer can be served directly from the fermenter, or transferred to a keg without introducing oxygen. Each unit is pressure tested straight off the production line.
The Apollo 30 L Unitank Pressure Fermenter takes brewing to new heights. This is the perfect fermenter to get into pressure fermentation, allowing you to ferment and carbonate in one vessel, meaning you get to drink your beer sooner.
With its conical shape, and clear, high-strength PET build, the Apollo allows you to ferment quality beer, under pressure, with confidence.
Specifications:
Stainless steel plunge valve and collection bottle for dumping trub and harvesting yeast
A dry hop port for sanitary dry hopping
Multi pressure option PRV selection - select the pressure setting from the 3 x PRVs included
Centralised floating dip tube for clear transfers
Thermowell to monitor the internal temperature
Built in handles
True conical shape
Stainless steel stand
When finished, the beer can be served directly from the fermenter, or transferred to a keg without introducing oxygen. Each unit is pressure tested straight off the production line.
The 'Chubby' is a 30 L pressure fermenter from Keg King - the next step up from the Fermenter King Junior. At 30 L in volume, this pressure fermenter is designed for full batches, and fits perfectly in a fermentation chamber. Made from clear, high-quality PET, you can enjoy all the advantages of pressure fermentation for batches 23-25 L, with plenty of headspace.
The Chubby lid features a gas and liquid post, as well as a PRV port, meaning gas and liquid are easily controlled for transfers, fermentation pressure and serving.
Brewers can extract bright, clear beer after fermentation by way of the floating diptubes that come standard with each Chubby fermenter. It also comes with stainless steel handles for easy transportation and the super smooth interiors make it easy to remove fermentation debris, making clean up simple.
Dimensions:
Height: 595mm
Width: 300mm
€69.95*
Available
This website uses cookies to ensure the best experience possible. More information...